linux.git, branch v3.14.72

Linux 3.14.72

2016-06-08T00:22:20+00:00

xfs: skip stale inodes in xfs_iflush_cluster

2016-06-08T00:21:59+00:00

commit 7d3aa7fe970791f1a674b14572a411accf2f4d4e upstream.

We don't write back stale inodes so we should skip them in
xfs_iflush_cluster, too.

Signed-off-by: Dave Chinner 
Reviewed-by: Brian Foster 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Dave Chinner 
Signed-off-by: Greg Kroah-Hartman

xfs: fix inode validity check in xfs_iflush_cluster

2016-06-08T00:21:59+00:00

commit 51b07f30a71c27405259a0248206ed4e22adbee2 upstream.

Some careless idiot(*) wrote crap code in commit 1a3e8f3 ("xfs:
convert inode cache lookups to use RCU locking") back in late 2010,
and so xfs_iflush_cluster checks the wrong inode for whether it is
still valid under RCU protection. Fix it to lock and check the
correct inode.

(*) Careless-idiot: Dave Chinner 

Discovered-by: Brain Foster 
Signed-off-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Dave Chinner 
Signed-off-by: Greg Kroah-Hartman

xfs: xfs_iflush_cluster fails to abort on error

2016-06-08T00:21:59+00:00

commit b1438f477934f5a4d5a44df26f3079a7575d5946 upstream.

When a failure due to an inode buffer occurs, the error handling
fails to abort the inode writeback correctly. This can result in the
inode being reclaimed whilst still in the AIL, leading to
use-after-free situations as well as filesystems that cannot be
unmounted as the inode log items left in the AIL never get removed.

Fix this by ensuring fatal errors from xfs_imap_to_bp() result in
the inode flush being aborted correctly.

Reported-by: Shyam Kaushik 
Diagnosed-by: Shyam Kaushik 
Tested-by: Shyam Kaushik 
Signed-off-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Dave Chinner 
Signed-off-by: Greg Kroah-Hartman

dma-debug: avoid spinlock recursion when disabling dma-debug

2016-06-08T00:21:59+00:00

commit 3017cd63f26fc655d56875aaf497153ba60e9edf upstream.

With netconsole (at least) the pr_err("...  disablingn") call can
recurse back into the dma-debug code, where it'll try to grab
free_entries_lock again.  Avoid the problem by doing the printk after
dropping the lock.

Link: http://lkml.kernel.org/r/1463678421-18683-1-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

ext4: silence UBSAN in ext4_mb_init()

2016-06-08T00:21:59+00:00

commit 935244cd54b86ca46e69bc6604d2adfb1aec2d42 upstream.

Currently, in ext4_mb_init(), there's a loop like the following:

  do {
    ...
    offset += 1 << (sb->s_blocksize_bits - i);
    i++;
  } while (i <= sb->s_blocksize_bits + 1);

Note that the updated offset is used in the loop's next iteration only.

However, at the last iteration, that is at i == sb->s_blocksize_bits + 1,
the shift count becomes equal to (unsigned)-1 > 31 (c.f. C99 6.5.7(3))
and UBSAN reports

  UBSAN: Undefined behaviour in fs/ext4/mballoc.c:2621:15
  shift exponent 4294967295 is too large for 32-bit type 'int'
  [...]
  Call Trace:
   [] dump_stack+0xbc/0x117
   [] ? _atomic_dec_and_lock+0x169/0x169
   [] ubsan_epilogue+0xd/0x4e
   [] __ubsan_handle_shift_out_of_bounds+0x1fb/0x254
   [] ? __ubsan_handle_load_invalid_value+0x158/0x158
   [] ? kmem_cache_alloc+0x101/0x390
   [] ? ext4_mb_init+0x13b/0xfd0
   [] ? create_cache+0x57/0x1f0
   [] ? create_cache+0x11a/0x1f0
   [] ? mutex_lock+0x38/0x60
   [] ? mutex_unlock+0x1b/0x50
   [] ? put_online_mems+0x5b/0xc0
   [] ? kmem_cache_create+0x117/0x2c0
   [] ext4_mb_init+0xc49/0xfd0
   [...]

Observe that the mentioned shift exponent, 4294967295, equals (unsigned)-1.

Unless compilers start to do some fancy transformations (which at least
GCC 6.0.0 doesn't currently do), the issue is of cosmetic nature only: the
such calculated value of offset is never used again.

Silence UBSAN by introducing another variable, offset_incr, holding the
next increment to apply to offset and adjust that one by right shifting it
by one position per loop iteration.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=114701
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112161

Signed-off-by: Nicolai Stange 
Signed-off-by: Theodore Ts'o 
Signed-off-by: Greg Kroah-Hartman

ext4: address UBSAN warning in mb_find_order_for_block()

2016-06-08T00:21:59+00:00

commit b5cb316cdf3a3f5f6125412b0f6065185240cfdc upstream.

Currently, in mb_find_order_for_block(), there's a loop like the following:

  while (order <= e4b->bd_blkbits + 1) {
    ...
    bb += 1 << (e4b->bd_blkbits - order);
  }

Note that the updated bb is used in the loop's next iteration only.

However, at the last iteration, that is at order == e4b->bd_blkbits + 1,
the shift count becomes negative (c.f. C99 6.5.7(3)) and UBSAN reports

  UBSAN: Undefined behaviour in fs/ext4/mballoc.c:1281:11
  shift exponent -1 is negative
  [...]
  Call Trace:
   [] dump_stack+0xbc/0x117
   [] ? _atomic_dec_and_lock+0x169/0x169
   [] ubsan_epilogue+0xd/0x4e
   [] __ubsan_handle_shift_out_of_bounds+0x1fb/0x254
   [] ? __ubsan_handle_load_invalid_value+0x158/0x158
   [] ? ext4_mb_generate_from_pa+0x590/0x590
   [] ? ext4_read_block_bitmap_nowait+0x598/0xe80
   [] mb_find_order_for_block+0x1ce/0x240
   [...]

Unless compilers start to do some fancy transformations (which at least
GCC 6.0.0 doesn't currently do), the issue is of cosmetic nature only: the
such calculated value of bb is never used again.

Silence UBSAN by introducing another variable, bb_incr, holding the next
increment to apply to bb and adjust that one by right shifting it by one
position per loop iteration.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=114701
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112161

Signed-off-by: Nicolai Stange 
Signed-off-by: Theodore Ts'o 
Signed-off-by: Greg Kroah-Hartman

ext4: fix hang when processing corrupted orphaned inode list

2016-06-08T00:21:59+00:00

commit c9eb13a9105e2e418f72e46a2b6da3f49e696902 upstream.

If the orphaned inode list contains inode #5, ext4_iget() returns a
bad inode (since the bootloader inode should never be referenced
directly).  Because of the bad inode, we end up processing the inode
repeatedly and this hangs the machine.

This can be reproduced via:

   mke2fs -t ext4 /tmp/foo.img 100
   debugfs -w -R "ssv last_orphan 5" /tmp/foo.img
   mount -o loop /tmp/foo.img /mnt

(But don't do this if you are using an unpatched kernel if you care
about the system staying functional.  :-)

This bug was found by the port of American Fuzzy Lop into the kernel
to find file system problems[1].  (Since it *only* happens if inode #5
shows up on the orphan list --- 3, 7, 8, etc. won't do it, it's not
surprising that AFL needed two hours before it found it.)

[1] http://events.linuxfoundation.org/sites/events/files/slides/AFL%20filesystem%20fuzzing%2C%20Vault%202016_0.pdf

Reported by: Vegard Nossum 
Signed-off-by: Theodore Ts'o 
Signed-off-by: Greg Kroah-Hartman

drm/fb_helper: Fix references to dev->mode_config.num_connector

2016-06-08T00:21:58+00:00

commit 255f0e7c418ad95a4baeda017ae6182ba9b3c423 upstream.

During boot, MST hotplugs are generally expected (even if no physical
hotplugging occurs) and result in DRM's connector topology changing.
This means that using num_connector from the current mode configuration
can lead to the number of connectors changing under us. This can lead to
some nasty scenarios in fbcon:

- We allocate an array to the size of dev->mode_config.num_connectors.
- MST hotplug occurs, dev->mode_config.num_connectors gets incremented.
- We try to loop through each element in the array using the new value
  of dev->mode_config.num_connectors, and end up going out of bounds
  since dev->mode_config.num_connectors is now larger then the array we
  allocated.

fb_helper->connector_count however, will always remain consistent while
we do a modeset in fb_helper.

Note: This is just polish for 4.7, Dave Airlie's drm_connector
refcounting fixed these bugs for real. But it's good enough duct-tape
for stable kernel backporting, since backporting the refcounting
changes is way too invasive.

Signed-off-by: Lyude 
[danvet: Clarify why we need this. Also remove the now unused "dev"
local variable to appease gcc.]
Signed-off-by: Daniel Vetter 
Link: http://patchwork.freedesktop.org/patch/msgid/1463065021-18280-3-git-send-email-cpaul@redhat.com
Signed-off-by: Greg Kroah-Hartman

drm/gma500: Fix possible out of bounds read

2016-06-08T00:21:58+00:00

commit 7ccca1d5bf69fdd1d3c5fcf84faf1659a6e0ad11 upstream.

Fix possible out of bounds read, by adding missing comma.
The code may read pass the end of the dsi_errors array
when the most significant bit (bit #31) in the intr_stat register
is set.
This bug has been detected using CppCheck (static analysis tool).

Signed-off-by: Itai Handler 
Signed-off-by: Patrik Jakobsson 
Signed-off-by: Greg Kroah-Hartman