linux.git, branch v3.4.104 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Linux 3.4.104 2014-09-25T03:49:19+00:00 Zefan Li lizefan@huawei.com 2014-09-25T03:49:19+00:00 bb4a05a0400ed6d2f1e13d1f82f289ff74300a70 






alpha: add io{read,write}{16,32}be functions
2014-09-25T03:49:19+00:00

Michael Cree
mcree@orcon.net.nz

2011-11-30T13:01:40+00:00

618dea44abf8e7766501ea94e9eda9308e1e4593

commit 25534eb7707821b796fd84f7115367e02f36aa60 upstream.

These functions are used in some PCI drivers with big-endian
MMIO space.

Admittedly it is almost certain that no one this side of the
Moon would use such a card in an Alpha but it does get us
closer to being able to build allyesconfig or allmodconfig,
and it enables the Debian default generic config to build.

Tested-by: Raúl Porcel <armin76@gentoo.org>
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Zefan Li <lizefan@huawei.com>





commit 25534eb7707821b796fd84f7115367e02f36aa60 upstream.

These functions are used in some PCI drivers with big-endian
MMIO space.

Admittedly it is almost certain that no one this side of the
Moon would use such a card in an Alpha but it does get us
closer to being able to build allyesconfig or allmodconfig,
and it enables the Debian default generic config to build.

Tested-by: Raúl Porcel <armin76@gentoo.org>
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Zefan Li <lizefan@huawei.com>







ext2: Fix fs corruption in ext2_get_xip_mem()
2014-09-25T03:49:19+00:00

Jan Kara
jack@suse.cz

2013-11-05T00:15:38+00:00

3a8f61352a884762e6485ab21af08054b76cff69

commit 7ba3ec5749ddb61f79f7be17b5fd7720eebc52de upstream.

Commit 8e3dffc651cb "Ext2: mark inode dirty after the function
dquot_free_block_nodirty is called" unveiled a bug in __ext2_get_block()
called from ext2_get_xip_mem(). That function called ext2_get_block()
mistakenly asking it to map 0 blocks while 1 was intended. Before the
above mentioned commit things worked out fine by luck but after that commit
we started returning that we allocated 0 blocks while we in fact
allocated 1 block and thus allocation was looping until all blocks in
the filesystem were exhausted.

Fix the problem by properly asking for one block and also add assertion
in ext2_get_blocks() to catch similar problems.

Reported-and-tested-by: Andiry Xu <andiry.xu@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>





commit 7ba3ec5749ddb61f79f7be17b5fd7720eebc52de upstream.

Commit 8e3dffc651cb "Ext2: mark inode dirty after the function
dquot_free_block_nodirty is called" unveiled a bug in __ext2_get_block()
called from ext2_get_xip_mem(). That function called ext2_get_block()
mistakenly asking it to map 0 blocks while 1 was intended. Before the
above mentioned commit things worked out fine by luck but after that commit
we started returning that we allocated 0 blocks while we in fact
allocated 1 block and thus allocation was looping until all blocks in
the filesystem were exhausted.

Fix the problem by properly asking for one block and also add assertion
in ext2_get_blocks() to catch similar problems.

Reported-and-tested-by: Andiry Xu <andiry.xu@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>







alpha: Fix fall-out from disintegrating asm/system.h
2014-09-25T03:49:18+00:00

Michael Cree
mcree@orcon.net.nz

2012-08-19T02:41:04+00:00

f79bb94b5ae6581d81f7b65cfc8f11e86bc2c8de

commit d1b5153f3ec83789b71d64efaf2a880c8fe6358e upstream.

Commit ec2212088c42 ("Disintegrate asm/system.h for Alpha") removed
asm/system.h however arch/alpha/oprofile/common.c requires definitions
that were shifted from asm/system.h to asm/special_insns.h.  Include
that.

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Zefan Li <lizefan@huawei.com>





commit d1b5153f3ec83789b71d64efaf2a880c8fe6358e upstream.

Commit ec2212088c42 ("Disintegrate asm/system.h for Alpha") removed
asm/system.h however arch/alpha/oprofile/common.c requires definitions
that were shifted from asm/system.h to asm/special_insns.h.  Include
that.

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Zefan Li <lizefan@huawei.com>







UniCore32-bugfix: fix mismatch return value of __xchg_bad_pointer
2014-09-25T03:49:18+00:00

Guan Xuetao
gxt@mprc.pku.edu.cn

2012-06-14T07:39:48+00:00

92a6e26fd0c8ba921890dd6adc0166f5ef927f8c

commit 195d4577d1d7ab1f0398b3190547c116b56f435f upstream.

When disintegrate system.h, I left an error in asm/cmpxchg.h, which
will result in following error:

arch/unicore32/include/asm/cmpxchg.h: In function '__xchg':
arch/unicore32/include/asm/cmpxchg.h:38: error: void value not ignored as it ought to be

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Zefan Li <lizefan@huawei.com>





commit 195d4577d1d7ab1f0398b3190547c116b56f435f upstream.

When disintegrate system.h, I left an error in asm/cmpxchg.h, which
will result in following error:

arch/unicore32/include/asm/cmpxchg.h: In function '__xchg':
arch/unicore32/include/asm/cmpxchg.h:38: error: void value not ignored as it ought to be

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Zefan Li <lizefan@huawei.com>







UniCore32-bugfix: Remove definitions in asm/bug.h to solve difference between native and cross compiler
2014-09-25T03:49:18+00:00

Guan Xuetao
gxt@mprc.pku.edu.cn

2012-06-14T03:38:25+00:00

4e36063eb13e743f1fdac0a65055c3f5fe28e387

commit 10e1e99e55378a65529c48753703c069aebce7af upstream.

For kernel/bound.c being compiled by native compiler, it will generate following errors in gcc 4.4.3:
  CC      kernel/bounds.s
In file included from include/linux/bug.h:4,
                 from include/linux/page-flags.h:9,
                 from kernel/bounds.c:9:
arch/unicore32/include/asm/bug.h:22: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void'
arch/unicore32/include/asm/bug.h:23: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void'

So, we moved definitions in asm/bug.h to arch/unicore32/kernel/setup.h to solve the problem.

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Zefan Li <lizefan@huawei.com>





commit 10e1e99e55378a65529c48753703c069aebce7af upstream.

For kernel/bound.c being compiled by native compiler, it will generate following errors in gcc 4.4.3:
  CC      kernel/bounds.s
In file included from include/linux/bug.h:4,
                 from include/linux/page-flags.h:9,
                 from kernel/bounds.c:9:
arch/unicore32/include/asm/bug.h:22: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void'
arch/unicore32/include/asm/bug.h:23: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void'

So, we moved definitions in asm/bug.h to arch/unicore32/kernel/setup.h to solve the problem.

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Zefan Li <lizefan@huawei.com>







unicore32: select generic atomic64_t support
2014-09-25T03:49:18+00:00

Fengguang Wu
fengguang.wu@intel.com

2012-10-05T00:11:23+00:00

62cdcceec9ccfac48f59bd03a258f91cb9700f45

commit 82e54a6aaf8aec971fb16afa3a4404e238a1b98b upstream.

It's required for the core fs/namespace.c and many other basic features.

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Zefan Li <lizefan@huawei.com>





commit 82e54a6aaf8aec971fb16afa3a4404e238a1b98b upstream.

It's required for the core fs/namespace.c and many other basic features.

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Zefan Li <lizefan@huawei.com>







8250_pci: fix warnings in backport of Broadcom TruManage support
2014-09-25T03:49:18+00:00

Paul Gortmaker
paul.gortmaker@windriver.com

2014-08-25T17:33:20+00:00

82a938ab75f966ee228ee85665cd074c5d078b42

commit 7400ce7ee9595432b2a1402b6ffcac9faf38d9ae (v3.4.92-76-g7400ce7ee959)
was a backport of commit ebebd49a8eab5e9aa1b1f8f1614ccc3c2120f886 upstream
("8250/16?50: Add support for Broadcom TruManage redirected serial port")

However, in the context of 3.4.x kernels, the pci setup code was
expecting a struct uart_port and not a struct uart_8250_port, leading to
the following concerning warnings:

drivers/tty/serial/8250/8250_pci.c: In function ‘pci_brcm_trumanage_setup’:
drivers/tty/serial/8250/8250_pci.c:1086:2: warning: passing argument 3 of ‘pci_default_setup’ from incompatible pointer type [enabled by default]
  int ret = pci_default_setup(priv, board, port, idx);
  ^
drivers/tty/serial/8250/8250_pci.c:1036:1: note: expected ‘struct uart_port *’ but argument is of type ‘struct uart_8250_port *’
 pci_default_setup(struct serial_private *priv,
 ^
drivers/tty/serial/8250/8250_pci.c: At top level:
drivers/tty/serial/8250/8250_pci.c:1746:3: warning: initialization from incompatible pointer type [enabled by default]
   .setup  = pci_brcm_trumanage_setup,
   ^
drivers/tty/serial/8250/8250_pci.c:1746:3: warning: (near initialization for ‘pci_serial_quirks[56].setup’) [enabled by default]

I'd also expect the initialization to not function correctly, and
perhaps dereference random garbage due to this.  Since the uart_port
is a field within the uart_8250_port, the adaptation to fix these
warnings is a straightforward removal of a layer of indirection.

Cc: Stephen Hurd <shurd@broadcom.com>
Cc: Michael Chan <mchan@broadcom.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Rui Xiang <rui.xiang@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>





commit 7400ce7ee9595432b2a1402b6ffcac9faf38d9ae (v3.4.92-76-g7400ce7ee959)
was a backport of commit ebebd49a8eab5e9aa1b1f8f1614ccc3c2120f886 upstream
("8250/16?50: Add support for Broadcom TruManage redirected serial port")

However, in the context of 3.4.x kernels, the pci setup code was
expecting a struct uart_port and not a struct uart_8250_port, leading to
the following concerning warnings:

drivers/tty/serial/8250/8250_pci.c: In function ‘pci_brcm_trumanage_setup’:
drivers/tty/serial/8250/8250_pci.c:1086:2: warning: passing argument 3 of ‘pci_default_setup’ from incompatible pointer type [enabled by default]
  int ret = pci_default_setup(priv, board, port, idx);
  ^
drivers/tty/serial/8250/8250_pci.c:1036:1: note: expected ‘struct uart_port *’ but argument is of type ‘struct uart_8250_port *’
 pci_default_setup(struct serial_private *priv,
 ^
drivers/tty/serial/8250/8250_pci.c: At top level:
drivers/tty/serial/8250/8250_pci.c:1746:3: warning: initialization from incompatible pointer type [enabled by default]
   .setup  = pci_brcm_trumanage_setup,
   ^
drivers/tty/serial/8250/8250_pci.c:1746:3: warning: (near initialization for ‘pci_serial_quirks[56].setup’) [enabled by default]

I'd also expect the initialization to not function correctly, and
perhaps dereference random garbage due to this.  Since the uart_port
is a field within the uart_8250_port, the adaptation to fix these
warnings is a straightforward removal of a layer of indirection.

Cc: Stephen Hurd <shurd@broadcom.com>
Cc: Michael Chan <mchan@broadcom.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Rui Xiang <rui.xiang@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>







slab/mempolicy: always use local policy from interrupt context
2014-09-25T03:49:17+00:00

Andi Kleen
ak@linux.intel.com

2012-06-09T09:40:03+00:00

69db2d4044cc494b03bad01b2e106f7324ef3fdf

commit e7b691b085fda913830e5280ae6f724b2a63c824 upstream.

slab_node() could access current->mempolicy from interrupt context.
However there's a race condition during exit where the mempolicy
is first freed and then the pointer zeroed.

Using this from interrupts seems bogus anyways. The interrupt
will interrupt a random process and therefore get a random
mempolicy. Many times, this will be idle's, which noone can change.

Just disable this here and always use local for slab
from interrupts. I also cleaned up the callers of slab_node a bit
which always passed the same argument.

I believe the original mempolicy code did that in fact,
so it's likely a regression.

v2: send version with correct logic
v3: simplify. fix typo.
Reported-by: Arun Sharma <asharma@fb.com>
Cc: penberg@kernel.org
Cc: cl@linux.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
[tdmackey@twitter.com: Rework control flow based on feedback from
cl@linux.com, fix logic, and cleanup current task_struct reference]
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: David Mackey <tdmackey@twitter.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>





commit e7b691b085fda913830e5280ae6f724b2a63c824 upstream.

slab_node() could access current->mempolicy from interrupt context.
However there's a race condition during exit where the mempolicy
is first freed and then the pointer zeroed.

Using this from interrupts seems bogus anyways. The interrupt
will interrupt a random process and therefore get a random
mempolicy. Many times, this will be idle's, which noone can change.

Just disable this here and always use local for slab
from interrupts. I also cleaned up the callers of slab_node a bit
which always passed the same argument.

I believe the original mempolicy code did that in fact,
so it's likely a regression.

v2: send version with correct logic
v3: simplify. fix typo.
Reported-by: Arun Sharma <asharma@fb.com>
Cc: penberg@kernel.org
Cc: cl@linux.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
[tdmackey@twitter.com: Rework control flow based on feedback from
cl@linux.com, fix logic, and cleanup current task_struct reference]
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: David Mackey <tdmackey@twitter.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>







openrisc: add missing header inclusion
2014-09-25T03:49:17+00:00

Stefan Kristiansson
stefan.kristiansson@saunalahti.fi

2013-02-26T06:36:29+00:00

ab22539512b325240dac92e92bbaf1d9aebaa2e5

commit 160d83781a32e94a1e337efd6722939001e62398 upstream.

Prevents build issue with updated toolchain

Reported-by: Jack Thomasson <jkt@moonlitsw.com>
Tested-by: Christian Svensson <blue@cmd.nu>
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Zefan Li <lizefan@huawei.com>





commit 160d83781a32e94a1e337efd6722939001e62398 upstream.

Prevents build issue with updated toolchain

Reported-by: Jack Thomasson <jkt@moonlitsw.com>
Tested-by: Christian Svensson <blue@cmd.nu>
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Zefan Li <lizefan@huawei.com>