linux.git, branch v4.1.8

Linux 4.1.8

2015-09-21T17:06:02+00:00

ARM: rockchip: fix broken build

2015-09-21T17:05:45+00:00

commit cb8cc37f4d38d96552f2c52deb15e511cdacf906 upstream.

The following was seen in branch[0] build.

arch/arm/mach-rockchip/platsmp.c:154:23: error:
    'rockchip_secondary_startup' undeclared (first use in this function)

branch[0]:
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git
v4.3-armsoc/soc

The broken build is caused by the commit fe4407c0dc58
("ARM: rockchip: fix the CPU soft reset").

Signed-off-by: Caesar Wang 

The breakage was a result of it being wrongly merged in my branch with
the cache invalidation rework from Russell 02b4e2756e01c
("ARM: v7 setup function should invalidate L1 cache").

Signed-off-by: Heiko Stuebner 
Cc: Willy Tarreau 
Signed-off-by: Greg Kroah-Hartman

fs: create and use seq_show_option for escaping

2015-09-21T17:05:45+00:00

commit a068acf2ee77693e0bf39d6e07139ba704f461c3 upstream.

Many file systems that implement the show_options hook fail to correctly
escape their output which could lead to unescaped characters (e.g.  new
lines) leaking into /proc/mounts and /proc/[pid]/mountinfo files.  This
could lead to confusion, spoofed entries (resulting in things like
systemd issuing false d-bus "mount" notifications), and who knows what
else.  This looks like it would only be the root user stepping on
themselves, but it's possible weird things could happen in containers or
in other situations with delegated mount privileges.

Here's an example using overlay with setuid fusermount trusting the
contents of /proc/mounts (via the /etc/mtab symlink).  Imagine the use
of "sudo" is something more sneaky:

  $ BASE="ovl"
  $ MNT="$BASE/mnt"
  $ LOW="$BASE/lower"
  $ UP="$BASE/upper"
  $ WORK="$BASE/work/ 0 0
  none /proc fuse.pwn user_id=1000"
  $ mkdir -p "$LOW" "$UP" "$WORK"
  $ sudo mount -t overlay -o "lowerdir=$LOW,upperdir=$UP,workdir=$WORK" none /mnt
  $ cat /proc/mounts
  none /root/ovl/mnt overlay rw,relatime,lowerdir=ovl/lower,upperdir=ovl/upper,workdir=ovl/work/ 0 0
  none /proc fuse.pwn user_id=1000 0 0
  $ fusermount -u /proc
  $ cat /proc/mounts
  cat: /proc/mounts: No such file or directory

This fixes the problem by adding new seq_show_option and
seq_show_option_n helpers, and updating the vulnerable show_option
handlers to use them as needed.  Some, like SELinux, need to be open
coded due to unusual existing escape mechanisms.

[akpm@linux-foundation.org: add lost chunk, per Kees]
[keescook@chromium.org: seq_show_option should be using const parameters]
Signed-off-by: Kees Cook 
Acked-by: Serge Hallyn 
Acked-by: Jan Kara 
Acked-by: Paul Moore 
Cc: J. R. Okajima 
Signed-off-by: Kees Cook 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

hpfs: update ctime and mtime on directory modification

2015-09-21T17:05:44+00:00

commit f49a26e7718dd30b49e3541e3e25aecf5e7294e2 upstream.

Update ctime and mtime when a directory is modified. (though OS/2 doesn't
update them anyway)

Signed-off-by: Mikulas Patocka 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

fs: Set the size of empty dirs to 0.

2015-09-21T17:05:44+00:00

commit 4b75de8615050c1b0dd8d7794838c42f74ed36ba upstream.

Before the make_empty_dir_inode calls were introduce into proc, sysfs,
and sysctl those directories when stated reported an i_size of 0.
make_empty_dir_inode started reporting an i_size of 2.  At least one
userspace application depended on stat returning i_size of 0.  So
modify make_empty_dir_inode to cause an i_size of 0 to be reported for
these directories.

Reported-by: Tejun Heo 
Acked-by: Tejun Heo 
Signed-off-by: "Eric W. Biederman" 
Signed-off-by: Greg Kroah-Hartman

drivercore: Fix unregistration path of platform devices

2015-09-21T17:05:44+00:00

commit 7f5dcaf1fdf289767a126a0a5cc3ef39b5254b06 upstream.

The unregister path of platform_device is broken. On registration, it
will register all resources with either a parent already set, or
type==IORESOURCE_{IO,MEM}. However, on unregister it will release
everything with type==IORESOURCE_{IO,MEM}, but ignore the others. There
are also cases where resources don't get registered in the first place,
like with devices created by of_platform_populate()*.

Fix the unregister path to be symmetrical with the register path by
checking the parent pointer instead of the type field to decide which
resources to unregister. This is safe because the upshot of the
registration path algorithm is that registered resources have a parent
pointer, and non-registered resources do not.

* It can be argued that of_platform_populate() should be registering
  it's resources, and they argument has some merit. However, there are
  quite a few platforms that end up broken if we try to do that due to
  overlapping resources in the device tree. Until that is fixed, we need
  to solve the immediate problem.

Cc: Pantelis Antoniou 
Cc: Wolfram Sang 
Cc: Rob Herring 
Cc: Greg Kroah-Hartman 
Cc: Ricardo Ribalda Delgado 
Signed-off-by: Grant Likely 
Tested-by: Ricardo Ribalda Delgado 
Tested-by: Wolfram Sang 
Signed-off-by: Rob Herring 
Signed-off-by: Greg Kroah-Hartman

ACPI, PCI: Penalize legacy IRQ used by ACPI SCI

2015-09-21T17:05:44+00:00

commit 5d0ddfebb93069061880fc57ee4ba7246bd1e1ee upstream.

Nick Meier reported a regression with HyperV that "
  After rebooting the VM, the following messages are logged in syslog
  when trying to load the tulip driver:
    tulip: Linux Tulip drivers version 1.1.15 (Feb 27, 2007)
    tulip: 0000:00:0a.0: PCI INT A: failed to register GSI
    tulip: Cannot enable tulip board #0, aborting
    tulip: probe of 0000:00:0a.0 failed with error -16
  Errors occur in 3.19.0 kernel
  Works in 3.17 kernel.
"

According to the ACPI dump file posted by Nick at
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1440072

The ACPI MADT table includes an interrupt source overridden entry for
ACPI SCI:
[236h 0566  1]                Subtable Type : 02 
[237h 0567  1]                       Length : 0A
[238h 0568  1]                          Bus : 00
[239h 0569  1]                       Source : 09
[23Ah 0570  4]                    Interrupt : 00000009
[23Eh 0574  2]        Flags (decoded below) : 000D
                                   Polarity : 1
                               Trigger Mode : 3

And in DSDT table, we have _PRT method to define PCI interrupts, which
eventually goes to:
        Name (PRSA, ResourceTemplate ()
        {
            IRQ (Level, ActiveLow, Shared, )
                {3,4,5,7,9,10,11,12,14,15}
        })
        Name (PRSB, ResourceTemplate ()
        {
            IRQ (Level, ActiveLow, Shared, )
                {3,4,5,7,9,10,11,12,14,15}
        })
        Name (PRSC, ResourceTemplate ()
        {
            IRQ (Level, ActiveLow, Shared, )
                {3,4,5,7,9,10,11,12,14,15}
        })
        Name (PRSD, ResourceTemplate ()
        {
            IRQ (Level, ActiveLow, Shared, )
                {3,4,5,7,9,10,11,12,14,15}
        })

According to the MADT and DSDT tables, IRQ 9 may be used for:
 1) ACPI SCI in level, high mode
 2) PCI legacy IRQ in level, low mode
So there's a conflict in polarity setting for IRQ 9.

Prior to commit cd68f6bd53cf ("x86, irq, acpi: Get rid of special
handling of GSI for ACPI SCI"), ACPI SCI is handled specially and
there's no check for conflicts between ACPI SCI and PCI legagy IRQ.
And it seems that the HyperV hypervisor doesn't make use of the
polarity configuration in IOAPIC entry, so it just works.

Commit cd68f6bd53cf gets rid of the specially handling of ACPI SCI,
and then the pin attribute checking code discloses the conflicts
between ACPI SCI and PCI legacy IRQ on HyperV virtual machine,
and rejects the request to assign IRQ9 to PCI devices.

So penalize legacy IRQ used by ACPI SCI and mark it unusable if ACPI
SCI attributes conflict with PCI IRQ attributes.

Please refer to following links for more information:
https://bugzilla.kernel.org/show_bug.cgi?id=101301
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1440072

Fixes: cd68f6bd53cf ("x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI")
Reported-and-tested-by: Nick Meier 
Acked-by: Thomas Gleixner 
Signed-off-by: Jiang Liu 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: rockchip: fix rk3288 watchdog irq

2015-09-21T17:05:44+00:00

commit 1a1b698b115467242303daf5fe1d3c9886c2fa17 upstream.

The watchdog irq is actually SPI 79, which translates to the original
111 in the manual where the SPI irqs start at 32.
The current dw_wdt driver does not use the irq at all, so this issue
never surfaced. Nevertheless fix this for a time we want to use the irq.

Fixes: 2ab557b72d46 ("ARM: dts: rockchip: add core rk3288 dtsi")
Signed-off-by: Heiko Stuebner 
Reviewed-by: Douglas Anderson 
Signed-off-by: Greg Kroah-Hartman

ARM: rockchip: fix the CPU soft reset

2015-09-21T17:05:43+00:00

commit fe4407c0dc58215a7abfb7532740d79ddabe7a7a upstream.

We need different orderings when turning a core on and turning a core
off.  In one case we need to assert reset before turning power off.
In ther other case we need to turn power on and the deassert reset.

In general, the correct flow is:

CPU off:
    reset_control_assert
    regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), BIT(pd))
    wait_for_power_domain_to_turn_off
CPU on:
    regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), 0)
    wait_for_power_domain_to_turn_on
    reset_control_deassert

This is needed for stressing CPU up/down, as per:
    cd /sys/devices/system/cpu/
    for i in $(seq 10000); do
        echo "================= $i ============"
        for j in $(seq 100); do
            while [[ "$(cat cpu1/online)$(cat cpu2/online)$(cat cpu3/online)" != "000"" ]]
                echo 0 > cpu1/online
                echo 0 > cpu2/online
                echo 0 > cpu3/online
            done
            while [[ "$(cat cpu1/online)$(cat cpu2/online)$(cat cpu3/online)" != "111" ]]; do
                echo 1 > cpu1/online
                echo 1 > cpu2/online
                echo 1 > cpu3/online
            done
        done
    done

The following is reproducable log:
    [34466.186812] PM: noirq suspend of devices complete after 0.669 msecs
    [34466.186824] Disabling non-boot CPUs ...
    [34466.187509] CPU1: shutdown
    [34466.188672] CPU2: shutdown
    [34473.736627] Kernel panic - not syncing:Watchdog detected hard LOCKUP on cpu 0
    .......
or others similar log:
    .......
    [ 4072.454453] CPU1: shutdown
    [ 4072.504436] CPU2: shutdown
    [ 4072.554426] CPU3: shutdown
    [ 4072.577827] CPU1: Booted secondary processor
    [ 4072.582611] CPU2: Booted secondary processor
    

    Tested by cpu up/down scripts, the results told us need delay more time
before write the sram. The wait time is affected by many aspects
(e.g: cpu frequency, bootrom frequency, sram frequency, bus speed, ...).

    Although the cpus other than cpu0 will write the sram, the speedy is
no the same as cpu0, if the cpu0 early wake up, perhaps the other cpus
can't startup. As we know, the cpu0 can wake up when the cpu1/2/3 write
the 'sram+4/8' and send the sev.
    Anyway.....
    At the moment, 1ms delay will be happy work for cpu up/down scripts test.

Signed-off-by: Caesar Wang 
Reviewed-by: Doug Anderson 
Reviewed-by: Kever Yang 
Fixes: 3ee851e212d0 ("ARM: rockchip: add basic smp support for rk3288")
Signed-off-by: Heiko Stuebner 
Signed-off-by: Greg Kroah-Hartman

ARM: OMAP2+: DRA7: clockdomain: change l4per2_7xx_clkdm to SW_WKUP

2015-09-21T17:05:43+00:00

commit b9e23f321940d2db2c9def8ff723b8464fb86343 upstream.

Legacy IPs like PWMSS, present under l4per2_7xx_clkdm, cannot support
smart-idle when its clock domain is in HW_AUTO on DRA7 SoCs. Hence,
program clock domain to SW_WKUP.

Signed-off-by: Vignesh R 
Acked-by: Tero Kristo 
Reviewed-by: Paul Walmsley 
Signed-off-by: Paul Walmsley 
Signed-off-by: Greg Kroah-Hartman