linux.git, branch v4.15.12 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Linux 4.15.12 2018-03-21T11:05:48+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2018-03-21T11:05:48+00:00 cfc8d40be91d767121a6f8c148db43c87be349ed 






phy: phy-brcm-usb-init: Power down USB 3.0 PHY when XHCI disabled
2018-03-21T11:05:48+00:00

Al Cooper
al.cooper@broadcom.com

2017-12-27T19:28:50+00:00

c3306c7f8f97184bcccea7bd1a3a58419b848669

commit cd6f769fdea7ff7d77a6cc97658c60ca0b836d0e upstream.

Set PHY3_IDDQ_OVERRIDE in the xhci uninit routine. This will save
additional power when the XHCI driver is not enabled.

Fixes: 49859e55e364 ("phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit cd6f769fdea7ff7d77a6cc97658c60ca0b836d0e upstream.

Set PHY3_IDDQ_OVERRIDE in the xhci uninit routine. This will save
additional power when the XHCI driver is not enabled.

Fixes: 49859e55e364 ("phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>








phy: phy-brcm-usb-init: DRD mode can cause crash on startup
2018-03-21T11:05:48+00:00

Al Cooper
al.cooper@broadcom.com

2017-12-27T19:28:51+00:00

5fb7cf9b1ca0fa06cc63a514bf639529fbd95d49

commit 0aa0c12262fd848c48448c39ff6c1c097be00dd4 upstream.

This is caused by a bug in the BDC core. When the BDC core comes
out of reset and it's not selected, it gets a backup clock. When
the BDC core is selected, it get's the main clock. If HOST mode
is then selected the BDC core has the main clock shut off but
the backup clock is not restored.

The failure scenario and cause are as follows:
- DRD mode is active
- Device mode is selected first in bootloader
- When host mode is now selected, the clock to the BDC is cut off.
- BDC registers are inaccessible and therefore the BDC driver
  crashes upon Linux boot.

The fix is to have the phy driver always force a BDC reset on
startup.

Fixes: 49859e55e364 ("phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit 0aa0c12262fd848c48448c39ff6c1c097be00dd4 upstream.

This is caused by a bug in the BDC core. When the BDC core comes
out of reset and it's not selected, it gets a backup clock. When
the BDC core is selected, it get's the main clock. If HOST mode
is then selected the BDC core has the main clock shut off but
the backup clock is not restored.

The failure scenario and cause are as follows:
- DRD mode is active
- Device mode is selected first in bootloader
- When host mode is now selected, the clock to the BDC is cut off.
- BDC registers are inaccessible and therefore the BDC driver
  crashes upon Linux boot.

The fix is to have the phy driver always force a BDC reset on
startup.

Fixes: 49859e55e364 ("phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>








phy: phy-brcm-usb-init: Some Low Speed keyboards fail on 7271
2018-03-21T11:05:48+00:00

Al Cooper
al.cooper@broadcom.com

2017-12-27T19:28:49+00:00

048fd682b2b8a43c50a0efa7108bab644cdcdabb

commit 279a0cd0e02aa1e506d9acf94a7ecb530821359c upstream.

Enable the the Low Speed Keep Alive signal on the 7271b0 by setting
the LS_KEEP_ALIVE bit in the USB CTRL OBRIDGE register otherwise
some Dell Low Speed keyboards fail.

Also do a little cleanup of the EBRIDGE ESTOP_SCB_REQ bit. Since
this is only used on one platform, remove it from the platform
tables and just use "if (family == ").

Fixes: 49859e55e364 ("phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit 279a0cd0e02aa1e506d9acf94a7ecb530821359c upstream.

Enable the the Low Speed Keep Alive signal on the 7271b0 by setting
the LS_KEEP_ALIVE bit in the USB CTRL OBRIDGE register otherwise
some Dell Low Speed keyboards fail.

Also do a little cleanup of the EBRIDGE ESTOP_SCB_REQ bit. Since
this is only used on one platform, remove it from the platform
tables and just use "if (family == ").

Fixes: 49859e55e364 ("phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>








phy: phy-brcm-usb: Fix two DT properties to match bindings doc
2018-03-21T11:05:47+00:00

Al Cooper
alcooperx@gmail.com

2017-12-27T19:28:48+00:00

43bcdded80fdf5cc99390aaf0cf15746258e2d31

commit 5e498ff117c19fd80181b5bb09ecb024b552ece8 upstream.

Change "brcm,has_xhci" and "brcm,has_eohci" device tree properties
to the preferred "brcm,has-xhci" and "brcm,has-eohci". This also
matches the existing device tree bindings document.

Fixes: 49859e55e364 ("phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit 5e498ff117c19fd80181b5bb09ecb024b552ece8 upstream.

Change "brcm,has_xhci" and "brcm,has_eohci" device tree properties
to the preferred "brcm,has-xhci" and "brcm,has-eohci". This also
matches the existing device tree bindings document.

Fixes: 49859e55e364 ("phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>








usb: gadget: udc: renesas_usb3: fix oops in renesas_usb3_remove()
2018-03-21T11:05:47+00:00

Yoshihiro Shimoda
yoshihiro.shimoda.uh@renesas.com

2018-01-12T11:00:56+00:00

2007a7097ce1341371abad66d9f898f083d42fbf

commit e3190868e5f52fb26544f16463593d54ce46ce61 upstream.

This patch fixes an issue that the renesas_usb3_remove() causes
NULL pointer dereference because the usb3_to_dev() macro will use
the gadget instance and it will be deleted before.

Fixes: cf06df3fae28 ("usb: gadget: udc: renesas_usb3: move pm_runtime_{en,dis}able()")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit e3190868e5f52fb26544f16463593d54ce46ce61 upstream.

This patch fixes an issue that the renesas_usb3_remove() causes
NULL pointer dereference because the usb3_to_dev() macro will use
the gadget instance and it will be deleted before.

Fixes: cf06df3fae28 ("usb: gadget: udc: renesas_usb3: move pm_runtime_{en,dis}able()")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>








usb: dwc3: of-simple: fix oops by unbalanced clk disable call
2018-03-21T11:05:47+00:00

Enric Balletbo i Serra
enric.balletbo@collabora.com

2017-12-18T15:14:36+00:00

95918af96116016b92826f29591a3665391286b5

commit bff52352e0ccc2481f2b6b0d612ff8ff56c50f3a upstream.

dwc3_of_simple_dev_pm_ops has never been used since commit a0d8c4cfdf31
("usb: dwc3: of-simple: set dev_pm_ops"), but this commit has brought
and oops when unbind the device due this sequence:

  dwc3_of_simple_remove
   -> clk_disable ...
      -> pm_runtime_put_sync
         -> dwc3_of_simple_runtime_suspend
            -> clk_disable (again)

This double call to clk_core_disable causes a kernel oops like this:

 WARNING: CPU: 1 PID: 4022 at drivers/clk/clk.c:656 clk_core_disable+0x78/0x80
 CPU: 1 PID: 4022 Comm: bash Not tainted 4.15.0-rc4+ #44
 Hardware name: Google Kevin (DT)
 pstate: 80000085 (Nzcv daIf -PAN -UAO)
 pc : clk_core_disable+0x78/0x80
 lr : clk_core_disable_lock+0x20/0x38
 sp : ffff00000bbf3a90
 ...
 Call trace:
  clk_core_disable+0x78/0x80
  clk_disable+0x1c/0x30
  dwc3_of_simple_runtime_suspend+0x30/0x50
  pm_generic_runtime_suspend+0x28/0x40

This patch fixes the unbalanced clk disable call by setting the num_clocks
variable to zero once the clocks were disabled.

Fixes: a0d8c4cfdf31 ("usb: dwc3: of-simple: set dev_pm_ops")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit bff52352e0ccc2481f2b6b0d612ff8ff56c50f3a upstream.

dwc3_of_simple_dev_pm_ops has never been used since commit a0d8c4cfdf31
("usb: dwc3: of-simple: set dev_pm_ops"), but this commit has brought
and oops when unbind the device due this sequence:

  dwc3_of_simple_remove
   -> clk_disable ...
      -> pm_runtime_put_sync
         -> dwc3_of_simple_runtime_suspend
            -> clk_disable (again)

This double call to clk_core_disable causes a kernel oops like this:

 WARNING: CPU: 1 PID: 4022 at drivers/clk/clk.c:656 clk_core_disable+0x78/0x80
 CPU: 1 PID: 4022 Comm: bash Not tainted 4.15.0-rc4+ #44
 Hardware name: Google Kevin (DT)
 pstate: 80000085 (Nzcv daIf -PAN -UAO)
 pc : clk_core_disable+0x78/0x80
 lr : clk_core_disable_lock+0x20/0x38
 sp : ffff00000bbf3a90
 ...
 Call trace:
  clk_core_disable+0x78/0x80
  clk_disable+0x1c/0x30
  dwc3_of_simple_runtime_suspend+0x30/0x50
  pm_generic_runtime_suspend+0x28/0x40

This patch fixes the unbalanced clk disable call by setting the num_clocks
variable to zero once the clocks were disabled.

Fixes: a0d8c4cfdf31 ("usb: dwc3: of-simple: set dev_pm_ops")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>








usb: dwc3: core: Power-off core/PHYs on system_suspend in host mode
2018-03-21T11:05:47+00:00

Manu Gautam
mgautam@codeaurora.org

2018-01-18T11:24:30+00:00

b9fac2b8326d1533c52fe1f32fde5050b7548666

commit c4a5153e87fdf6805f63ff57556260e2554155a5 upstream.

Commit 689bf72c6e0d ("usb: dwc3: Don't reinitialize core during
host bus-suspend/resume") updated suspend/resume routines to not
power_off and reinit PHYs/core for host mode.
It broke platforms that rely on DWC3 core to power_off PHYs to
enter low power state on system suspend.

Perform dwc3_core_exit/init only during host mode system_suspend/
resume to addresses power regression from above mentioned patch
and also allow USB session to stay connected across
runtime_suspend/resume in host mode. While at it also replace
existing checks for HOST only dr_mode with current_dr_role to
have similar core driver behavior for both Host-only and DRD+Host
configurations.

Fixes: 689bf72c6e0d ("usb: dwc3: Don't reinitialize core during host bus-suspend/resume")
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit c4a5153e87fdf6805f63ff57556260e2554155a5 upstream.

Commit 689bf72c6e0d ("usb: dwc3: Don't reinitialize core during
host bus-suspend/resume") updated suspend/resume routines to not
power_off and reinit PHYs/core for host mode.
It broke platforms that rely on DWC3 core to power_off PHYs to
enter low power state on system suspend.

Perform dwc3_core_exit/init only during host mode system_suspend/
resume to addresses power regression from above mentioned patch
and also allow USB session to stay connected across
runtime_suspend/resume in host mode. While at it also replace
existing checks for HOST only dr_mode with current_dr_role to
have similar core driver behavior for both Host-only and DRD+Host
configurations.

Fixes: 689bf72c6e0d ("usb: dwc3: Don't reinitialize core during host bus-suspend/resume")
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>








usb: dwc3: Fix GDBGFIFOSPACE_TYPE values
2018-03-21T11:05:47+00:00

Thinh Nguyen
Thinh.Nguyen@synopsys.com

2018-02-02T21:21:35+00:00

cad33fd60fdeac2587802abdb51eb1a3cbeac841

commit b16ea8b9492e99e03b1269fe93ebdbf8e4eabf8a upstream.

The FIFO/Queue type values are incorrect. Correct them according to
DWC_usb3 programming guide section 1.2.27 (or DWC_usb31 section 1.2.25).

Additionally, this patch includes ProtocolStatusQ and AuxEventQ types.

Fixes: cf6d867d3b57 ("usb: dwc3: core: add fifo space helper")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit b16ea8b9492e99e03b1269fe93ebdbf8e4eabf8a upstream.

The FIFO/Queue type values are incorrect. Correct them according to
DWC_usb3 programming guide section 1.2.27 (or DWC_usb31 section 1.2.25).

Additionally, this patch includes ProtocolStatusQ and AuxEventQ types.

Fixes: cf6d867d3b57 ("usb: dwc3: core: add fifo space helper")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>








USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe()
2018-03-21T11:05:47+00:00

Wei Yongjun
weiyongjun1@huawei.com

2018-01-23T09:35:14+00:00

41d3763d99424730f62e5dd67567f961e5a9d34e

commit 8874ae5f15f3feef3b4a415b9aed51edcf449aa1 upstream.

Add the missing platform_device_put() before return from bdc_pci_probe()
in the platform_device_add_resources() error handling case.

Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit 8874ae5f15f3feef3b4a415b9aed51edcf449aa1 upstream.

Add the missing platform_device_put() before return from bdc_pci_probe()
in the platform_device_add_resources() error handling case.

Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>