linux.git, branch v4.20.6 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Linux 4.20.6 2019-01-31T07:15:47+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2019-01-31T07:15:47+00:00 65f42a73e55331961153006e902c4fe0bb4a69bb 






Input: input_event - fix the CONFIG_SPARC64 mixup
2019-01-31T07:15:46+00:00

Deepa Dinamani
deepa.kernel@gmail.com

2019-01-24T08:29:20+00:00

4c8e581506abda82392b619b6f38afd9f074eff8

commit 141e5dcaa7356077028b4cd48ec351a38c70e5e5 upstream.

Arnd Bergmann pointed out that CONFIG_* cannot be used in a uapi header.
Override with an equivalent conditional.

Fixes: 2e746942ebac ("Input: input_event - provide override for sparc64")
Fixes: 152194fe9c3f ("Input: extend usable life of event timestamps to 2106 on 32 bit systems")
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit 141e5dcaa7356077028b4cd48ec351a38c70e5e5 upstream.

Arnd Bergmann pointed out that CONFIG_* cannot be used in a uapi header.
Override with an equivalent conditional.

Fixes: 2e746942ebac ("Input: input_event - provide override for sparc64")
Fixes: 152194fe9c3f ("Input: extend usable life of event timestamps to 2106 on 32 bit systems")
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>








ide: fix a typo in the settings proc file name
2019-01-31T07:15:46+00:00

Christoph Hellwig
hch@lst.de

2018-12-20T16:16:53+00:00

3ff523df8d1c01314a7dc43418c1406eba6fdaca

commit f8ff6c732d35904d773043f979b844ef330c701b upstream.

Fixes: ec7d9c9ce8 ("ide: replace ->proc_fops with ->proc_show")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit f8ff6c732d35904d773043f979b844ef330c701b upstream.

Fixes: ec7d9c9ce8 ("ide: replace ->proc_fops with ->proc_show")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>








mt76x0: phy: unify calibration between mt76x0u and mt76x0e
2019-01-31T07:15:46+00:00

Lorenzo Bianconi
lorenzo.bianconi@redhat.com

2019-01-22T12:38:37+00:00

6b90547dd898ea47dd7c563ac61fa9b47fbb3227

commit 1163bdb636a118b9d7c3c03b9e67e7e799425a9c upstream.

Align phy calibration logic between mt76x0u and mt76x0e drivers
This patch improves connection stability with low SNR

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>





commit 1163bdb636a118b9d7c3c03b9e67e7e799425a9c upstream.

Align phy calibration logic between mt76x0u and mt76x0e drivers
This patch improves connection stability with low SNR

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>







mt76x0: antenna select corrections
2019-01-31T07:15:46+00:00

Stanislaw Gruszka
sgruszka@redhat.com

2019-01-22T12:38:36+00:00

9e39a91e9e282cc02ab9585ca8d3c5b621323e96

commit ef442b73b6bc36b5499e1983611abb46e6337975 upstream.

Update mt76x0_phy_ant_select() to conform vendor driver, most notably
add dual antenna mode support, read configuration from EEPROM and
move ant select out of channel config to init phase. Plus small MT7630E
quirk for MT_CMB_CTRL register which vendor driver dedicated to this
chip do.

This make MT7630E workable with mt76x0e driver and do not cause any
problems on MT7610U for me.

Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>





commit ef442b73b6bc36b5499e1983611abb46e6337975 upstream.

Update mt76x0_phy_ant_select() to conform vendor driver, most notably
add dual antenna mode support, read configuration from EEPROM and
move ant select out of channel config to init phase. Plus small MT7630E
quirk for MT_CMB_CTRL register which vendor driver dedicated to this
chip do.

This make MT7630E workable with mt76x0e driver and do not cause any
problems on MT7610U for me.

Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>







mt76x0: do not perform MCU calibration for MT7630
2019-01-31T07:15:46+00:00

Stanislaw Gruszka
sgruszka@redhat.com

2019-01-22T12:38:35+00:00

14275ffa9ba5489174d099b1890bf7ef28bde2ed

commit a83150eaad42769e4d08b6e07956a489e40214ae upstream.

Driver works better for MT7630 without MCU calibration, which
looks like it can hangs the firmware. Vendor driver do not
perform it for MT7630 as well.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>





commit a83150eaad42769e4d08b6e07956a489e40214ae upstream.

Driver works better for MT7630 without MCU calibration, which
looks like it can hangs the firmware. Vendor driver do not
perform it for MT7630 as well.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>







mt76x02: assure we update gain after scan
2019-01-31T07:15:46+00:00

Stanislaw Gruszka
sgruszka@redhat.com

2019-01-22T12:38:34+00:00

e15c6c8a835125d4415f7cba865067c227bffa72

commit 4784a3cc3fffd0ba5ef6c7a23980ae0318fc1369 upstream.

Assure that after we initialize dev->cal.low_gain to -1 this
will cause update gain calibration. Otherwise this might or
might not happen depending on value of second bit of low_gain
and values read from registers in mt76x02_phy_adjust_vga_gain().

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>





commit 4784a3cc3fffd0ba5ef6c7a23980ae0318fc1369 upstream.

Assure that after we initialize dev->cal.low_gain to -1 this
will cause update gain calibration. Otherwise this might or
might not happen depending on value of second bit of low_gain
and values read from registers in mt76x02_phy_adjust_vga_gain().

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>







mt76x02: run calibration after scanning
2019-01-31T07:15:46+00:00

Stanislaw Gruszka
sgruszka@redhat.com

2018-11-01T15:35:01+00:00

1101ce4ab3c3467246ded46c4eed27fd00bba7a6

commit f1b8ee35fec4a070b7760a99709fc98f237c2b86 upstream.

If we are associated and scanning is performed, sw_scan_complete callback
is done after we get back to operating channel, so we do not perform
queue cal work. Fix this queue cal work from sw_scan_complete().

On mt76x0 we have to restore gain in MT_BBP(AGC, 8) register after
scanning, as it was multiple times modified by channel switch code.
So queue cal work without any delay to set AGC gain value.

Similar like in mt76x2 init AGC gain only when set operating channel
and just check before queuing cal work in sw_scan_complete() if
initialization was already done.

Fixes: bbd10586f0df ("mt76x0: phy: do not run calibration during channel switch")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>







commit f1b8ee35fec4a070b7760a99709fc98f237c2b86 upstream.

If we are associated and scanning is performed, sw_scan_complete callback
is done after we get back to operating channel, so we do not perform
queue cal work. Fix this queue cal work from sw_scan_complete().

On mt76x0 we have to restore gain in MT_BBP(AGC, 8) register after
scanning, as it was multiple times modified by channel switch code.
So queue cal work without any delay to set AGC gain value.

Similar like in mt76x2 init AGC gain only when set operating channel
and just check before queuing cal work in sw_scan_complete() if
initialization was already done.

Fixes: bbd10586f0df ("mt76x0: phy: do not run calibration during channel switch")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>









mt76x0: use band parameter for LC calibration
2019-01-31T07:15:46+00:00

Stanislaw Gruszka
sgruszka@redhat.com

2018-10-25T16:18:33+00:00

ee21042f9c6bed1a1ac146b003ef95afb8581904

commit ad3f993a0857ad3b792e7463828eb0d90cdd6f4d upstream.

We use always 1 as band parameter for MCU_CAL_LC, this break 2GHz,
we should use 0 for this band instead.

Patch fixes problems happened sometimes when try to associate with 2GHz
AP and manifest by errors like below:

[14680.920823] wlan0: authenticate with 18:31:bf:c0:51:b0
[14681.109506] wlan0: send auth to 18:31:bf:c0:51:b0 (try 1/3)
[14681.310454] wlan0: send auth to 18:31:bf:c0:51:b0 (try 2/3)
[14681.518469] wlan0: send auth to 18:31:bf:c0:51:b0 (try 3/3)
[14681.726499] wlan0: authentication with 18:31:bf:c0:51:b0 timed out

Fixes: 9aec146d0f6b ("mt76x0: pci: introduce mt76x0_phy_calirate routine")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit ad3f993a0857ad3b792e7463828eb0d90cdd6f4d upstream.

We use always 1 as band parameter for MCU_CAL_LC, this break 2GHz,
we should use 0 for this band instead.

Patch fixes problems happened sometimes when try to associate with 2GHz
AP and manifest by errors like below:

[14680.920823] wlan0: authenticate with 18:31:bf:c0:51:b0
[14681.109506] wlan0: send auth to 18:31:bf:c0:51:b0 (try 1/3)
[14681.310454] wlan0: send auth to 18:31:bf:c0:51:b0 (try 2/3)
[14681.518469] wlan0: send auth to 18:31:bf:c0:51:b0 (try 3/3)
[14681.726499] wlan0: authentication with 18:31:bf:c0:51:b0 timed out

Fixes: 9aec146d0f6b ("mt76x0: pci: introduce mt76x0_phy_calirate routine")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>








mt76x0: do not overwrite other MT_BBP(AGC, 8) fields
2019-01-31T07:15:46+00:00

Stanislaw Gruszka
sgruszka@redhat.com

2018-10-31T07:32:58+00:00

3650aa1059275103c7c4516fec360249aa1b1bdf

commit b983a5b900627faa49cf37e101d65b56e941c740 upstream.

MT_BBP(AGC, 8) register has values depend on band in
mt76x0_bbp_switch_tab, so we should not overwrite other fields
than MT_BBP_AGC_GAIN when setting gain.

This can fix performance issues when connecting to 2.4GHz AP.

Fixes: 4636a2544c3b ("mt76x0: phy: align channel gain logic to mt76x2 one")
Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>







commit b983a5b900627faa49cf37e101d65b56e941c740 upstream.

MT_BBP(AGC, 8) register has values depend on band in
mt76x0_bbp_switch_tab, so we should not overwrite other fields
than MT_BBP_AGC_GAIN when setting gain.

This can fix performance issues when connecting to 2.4GHz AP.

Fixes: 4636a2544c3b ("mt76x0: phy: align channel gain logic to mt76x2 one")
Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>