linux.git, branch v4.4.253

Linux 4.4.253

2021-01-23T14:36:57+00:00

Tested-by: Shuah Khan 
Tested-by: Linux Kernel Functional Testing 
Tested-by: Jon Hunter 
Tested-by: Pavel Machek (CIP) 
Tested-by: Guenter Roeck 
Link: https://lore.kernel.org/r/20210122160822.198606273@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman

spi: cadence: cache reference clock rate during probe

2021-01-23T14:36:56+00:00

commit 4d163ad79b155c71bf30366dc38f8d2502f78844 upstream.

The issue is that using SPI from a callback under the CCF lock will
deadlock, since this code uses clk_get_rate().

Fixes: c474b38665463 ("spi: Add driver for Cadence SPI controller")
Signed-off-by: Michael Hennerich 
Signed-off-by: Alexandru Ardelean 
Link: https://lore.kernel.org/r/20210114154217.51996-1-alexandru.ardelean@analog.com
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

net: avoid 32 x truesize under-estimation for tiny skbs

2021-01-23T14:36:56+00:00

[ Upstream commit 3226b158e67cfaa677fd180152bfb28989cb2fac ]

Both virtio net and napi_get_frags() allocate skbs
with a very small skb->head

While using page fragments instead of a kmalloc backed skb->head might give
a small performance improvement in some cases, there is a huge risk of
under estimating memory usage.

For both GOOD_COPY_LEN and GRO_MAX_HEAD, we can fit at least 32 allocations
per page (order-3 page in x86), or even 64 on PowerPC

We have been tracking OOM issues on GKE hosts hitting tcp_mem limits
but consuming far more memory for TCP buffers than instructed in tcp_mem[2]

Even if we force napi_alloc_skb() to only use order-0 pages, the issue
would still be there on arches with PAGE_SIZE >= 32768

This patch makes sure that small skb head are kmalloc backed, so that
other objects in the slab page can be reused instead of being held as long
as skbs are sitting in socket queues.

Note that we might in the future use the sk_buff napi cache,
instead of going through a more expensive __alloc_skb()

Another idea would be to use separate page sizes depending
on the allocated length (to never have more than 4 frags per page)

I would like to thank Greg Thelen for his precious help on this matter,
analysing crash dumps is always a time consuming task.

Fixes: fd11a83dd363 ("net: Pull out core bits of __netdev_alloc_skb and add __napi_alloc_skb")
Signed-off-by: Eric Dumazet 
Cc: Paolo Abeni 
Cc: Greg Thelen 
Reviewed-by: Alexander Duyck 
Acked-by: Michael S. Tsirkin 
Link: https://lore.kernel.org/r/20210113161819.1155526-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

rxrpc: Fix handling of an unsupported token type in rxrpc_read()

2021-01-23T14:36:56+00:00

[ Upstream commit d52e419ac8b50c8bef41b398ed13528e75d7ad48 ]

Clang static analysis reports the following:

net/rxrpc/key.c:657:11: warning: Assigned value is garbage or undefined
                toksize = toksizes[tok++];
                        ^ ~~~~~~~~~~~~~~~

rxrpc_read() contains two consecutive loops.  The first loop calculates the
token sizes and stores the results in toksizes[] and the second one uses
the array.  When there is an error in identifying the token in the first
loop, the token is skipped, no change is made to the toksizes[] array.
When the same error happens in the second loop, the token is not skipped.
This will cause the toksizes[] array to be out of step and will overrun
past the calculated sizes.

Fix this by making both loops log a message and return an error in this
case.  This should only happen if a new token type is incompletely
implemented, so it should normally be impossible to trigger this.

Fixes: 9a059cd5ca7d ("rxrpc: Downgrade the BUG() for unsupported token type in rxrpc_read()")
Reported-by: Tom Rix 
Signed-off-by: David Howells 
Reviewed-by: Tom Rix 
Link: https://lore.kernel.org/r/161046503122.2445787.16714129930607546635.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: sit: unregister_netdevice on newlink's error path

2021-01-23T14:36:56+00:00

[ Upstream commit 47e4bb147a96f1c9b4e7691e7e994e53838bfff8 ]

We need to unregister the netdevice if config failed.
.ndo_uninit takes care of most of the heavy lifting.

This was uncovered by recent commit c269a24ce057 ("net: make
free_netdev() more lenient with unregistering devices").
Previously the partially-initialized device would be left
in the system.

Reported-and-tested-by: syzbot+2393580080a2da190f04@syzkaller.appspotmail.com
Fixes: e2f1f072db8d ("sit: allow to configure 6rd tunnels via netlink")
Acked-by: Nicolas Dichtel 
Link: https://lore.kernel.org/r/20210114012947.2515313-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: dcb: Accept RTM_GETDCB messages carrying set-like DCB commands

2021-01-23T14:36:56+00:00

[ Upstream commit df85bc140a4d6cbaa78d8e9c35154e1a2f0622c7 ]

In commit 826f328e2b7e ("net: dcb: Validate netlink message in DCB
handler"), Linux started rejecting RTM_GETDCB netlink messages if they
contained a set-like DCB_CMD_ command.

The reason was that privileges were only verified for RTM_SETDCB messages,
but the value that determined the action to be taken is the command, not
the message type. And validation of message type against the DCB command
was the obvious missing piece.

Unfortunately it turns out that mlnx_qos, a somewhat widely deployed tool
for configuration of DCB, accesses the DCB set-like APIs through
RTM_GETDCB.

Therefore do not bounce the discrepancy between message type and command.
Instead, in addition to validating privileges based on the actual message
type, validate them also based on the expected message type. This closes
the loophole of allowing DCB configuration on non-admin accounts, while
maintaining backward compatibility.

Fixes: 2f90b8657ec9 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver")
Fixes: 826f328e2b7e ("net: dcb: Validate netlink message in DCB handler")
Signed-off-by: Petr Machata 
Link: https://lore.kernel.org/r/a3edcfda0825f2aa2591801c5232f2bbf2d8a554.1610384801.git.me@pmachata.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: dcb: Validate netlink message in DCB handler

2021-01-23T14:36:56+00:00

[ Upstream commit 826f328e2b7e8854dd42ea44e6519cd75018e7b1 ]

DCB uses the same handler function for both RTM_GETDCB and RTM_SETDCB
messages. dcb_doit() bounces RTM_SETDCB mesasges if the user does not have
the CAP_NET_ADMIN capability.

However, the operation to be performed is not decided from the DCB message
type, but from the DCB command. Thus DCB_CMD_*_GET commands are used for
reading DCB objects, the corresponding SET and DEL commands are used for
manipulation.

The assumption is that set-like commands will be sent via an RTM_SETDCB
message, and get-like ones via RTM_GETDCB. However, this assumption is not
enforced.

It is therefore possible to manipulate DCB objects without CAP_NET_ADMIN
capability by sending the corresponding command in an RTM_GETDCB message.
That is a bug. Fix it by validating the type of the request message against
the type used for the response.

Fixes: 2f90b8657ec9 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver")
Signed-off-by: Petr Machata 
Link: https://lore.kernel.org/r/a2a9b88418f3a58ef211b718f2970128ef9e3793.1608673640.git.me@pmachata.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

rndis_host: set proper input size for OID_GEN_PHYSICAL_MEDIUM request

2021-01-23T14:36:56+00:00

[ Upstream commit e56b3d94d939f52d46209b9e1b6700c5bfff3123 ]

MSFT ActiveSync implementation requires that the size of the response for
incoming query is to be provided in the request input length. Failure to
set the input size proper results in failed request transfer, where the
ActiveSync counterpart reports the NDIS_STATUS_INVALID_LENGTH (0xC0010014L)
error.

Set the input size for OID_GEN_PHYSICAL_MEDIUM query to the expected size
of the response in order for the ActiveSync to properly respond to the
request.

Fixes: 039ee17d1baa ("rndis_host: Add RNDIS physical medium checking into generic_rndis_bind()")
Signed-off-by: Andrey Zhizhikin 
Link: https://lore.kernel.org/r/20210108095839.3335-1-andrey.zhizhikin@leica-geosystems.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

netxen_nic: fix MSI/MSI-x interrupts

2021-01-23T14:36:56+00:00

[ Upstream commit a2bc221b972db91e4be1970e776e98f16aa87904 ]

For all PCI functions on the netxen_nic adapter, interrupt
mode (INTx or MSI) configuration is dependent on what has
been configured by the PCI function zero in the shared
interrupt register, as these adapters do not support mixed
mode interrupts among the functions of a given adapter.

Logic for setting MSI/MSI-x interrupt mode in the shared interrupt
register based on PCI function id zero check is not appropriate for
all family of netxen adapters, as for some of the netxen family
adapters PCI function zero is not really meant to be probed/loaded
in the host but rather just act as a management function on the device,
which caused all the other PCI functions on the adapter to always use
legacy interrupt (INTx) mode instead of choosing MSI/MSI-x interrupt mode.

This patch replaces that check with port number so that for all
type of adapters driver attempts for MSI/MSI-x interrupt modes.

Fixes: b37eb210c076 ("netxen_nic: Avoid mixed mode interrupts")
Signed-off-by: Manish Chopra 
Signed-off-by: Igor Russkikh 
Link: https://lore.kernel.org/r/20210107101520.6735-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: cdc_ncm: correct overhead in delayed_ndp_size

2021-01-23T14:36:56+00:00

commit 7a68d725e4ea384977445e0bcaed3d7de83ab5b3 upstream.

Aligning to tx_ndp_modulus is not sufficient because the next align
call can be cdc_ncm_align_tail, which can add up to ctx->tx_modulus +
ctx->tx_remainder - 1 bytes. This used to lead to occasional crashes
on a Huawei 909s-120 LTE module as follows:

- the condition marked /* if there is a remaining skb [...] */ is true
  so the swaps happen
- skb_out is set from ctx->tx_curr_skb
- skb_out->len is exactly 0x3f52
- ctx->tx_curr_size is 0x4000 and delayed_ndp_size is 0xac
  (note that the sum of skb_out->len and delayed_ndp_size is 0x3ffe)
- the for loop over n is executed once
- the cdc_ncm_align_tail call marked /* align beginning of next frame */
  increases skb_out->len to 0x3f56 (the sum is now 0x4002)
- the condition marked /* check if we had enough room left [...] */ is
  false so we break out of the loop
- the condition marked /* If requested, put NDP at end of frame. */ is
  true so the NDP is written into skb_out
- now skb_out->len is 0x4002, so padding_count is minus two interpreted
  as an unsigned number, which is used as the length argument to memset,
  leading to a crash with various symptoms but usually including

> Call Trace:
>  
>  cdc_ncm_fill_tx_frame+0x83a/0x970 [cdc_ncm]
>  cdc_mbim_tx_fixup+0x1d9/0x240 [cdc_mbim]
>  usbnet_start_xmit+0x5d/0x720 [usbnet]

The cdc_ncm_align_tail call first aligns on a ctx->tx_modulus
boundary (adding at most ctx->tx_modulus-1 bytes), then adds
ctx->tx_remainder bytes. Alternatively, the next alignment call can
occur in cdc_ncm_ndp16 or cdc_ncm_ndp32, in which case at most
ctx->tx_ndp_modulus-1 bytes are added.

A similar problem has occurred before, and the code is nontrivial to
reason about, so add a guard before the crashing call. By that time it
is too late to prevent any memory corruption (we'll have written past
the end of the buffer already) but we can at least try to get a warning
written into an on-disk log by avoiding the hard crash caused by padding
past the buffer with a huge number of zeros.

Signed-off-by: Jouni K. Seppänen 
Fixes: 4a0e3e989d66 ("cdc_ncm: Add support for moving NDP to end of NCM frame")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209407
Reported-by: kernel test robot 
Reviewed-by: Bjørn Mork 
Signed-off-by: David S. Miller 
[jks@iki.fi: backport to 4.4.y, 4.9.y]
Signed-off-by: Jouni K. Seppänen 
Signed-off-by: Greg Kroah-Hartman