linux.git, branch v4.9.214

Linux 4.9.214

2020-02-14T21:31:10+00:00

libertas: make lbs_ibss_join_existing() return error code on rates overflow

2020-02-14T21:31:10+00:00

[ Upstream commit 1754c4f60aaf1e17d886afefee97e94d7f27b4cb ]

Commit e5e884b42639 ("libertas: Fix two buffer overflows at parsing bss
descriptor") introduced a bounds check on the number of supplied rates to
lbs_ibss_join_existing() and made it to return on overflow.

However, the aforementioned commit doesn't set the return value accordingly
and thus, lbs_ibss_join_existing() would return with zero even though it
failed.

Make lbs_ibss_join_existing return -EINVAL in case the bounds check on the
number of supplied rates fails.

Fixes: e5e884b42639 ("libertas: Fix two buffer overflows at parsing bss descriptor")
Signed-off-by: Nicolai Stange 
Signed-off-by: Kalle Valo 
Signed-off-by: Sasha Levin

libertas: don't exit from lbs_ibss_join_existing() with RCU read lock held

2020-02-14T21:31:10+00:00

[ Upstream commit c7bf1fb7ddca331780b9a733ae308737b39f1ad4 ]

Commit e5e884b42639 ("libertas: Fix two buffer overflows at parsing bss
descriptor") introduced a bounds check on the number of supplied rates to
lbs_ibss_join_existing().

Unfortunately, it introduced a return path from within a RCU read side
critical section without a corresponding rcu_read_unlock(). Fix this.

Fixes: e5e884b42639 ("libertas: Fix two buffer overflows at parsing bss descriptor")
Signed-off-by: Nicolai Stange 
Signed-off-by: Kalle Valo 
Signed-off-by: Sasha Levin

mwifiex: Fix possible buffer overflows in mwifiex_cmd_append_vsie_tlv()

2020-02-14T21:31:10+00:00

[ Upstream commit b70261a288ea4d2f4ac7cd04be08a9f0f2de4f4d ]

mwifiex_cmd_append_vsie_tlv() calls memcpy() without checking
the destination size may trigger a buffer overflower,
which a local user could use to cause denial of service
or the execution of arbitrary code.
Fix it by putting the length check before calling memcpy().

Signed-off-by: Qing Xu 
Signed-off-by: Kalle Valo 
Signed-off-by: Sasha Levin

mwifiex: Fix possible buffer overflows in mwifiex_ret_wmm_get_status()

2020-02-14T21:31:10+00:00

[ Upstream commit 3a9b153c5591548612c3955c9600a98150c81875 ]

mwifiex_ret_wmm_get_status() calls memcpy() without checking the
destination size.Since the source is given from remote AP which
contains illegal wmm elements , this may trigger a heap buffer
overflow.
Fix it by putting the length check before calling memcpy().

Signed-off-by: Qing Xu 
Signed-off-by: Kalle Valo 
Signed-off-by: Sasha Levin

dm: fix potential for q->make_request_fn NULL pointer

2020-02-14T21:31:10+00:00

commit 47ace7e012b9f7ad71d43ac9063d335ea3d6820b upstream.

Move blk_queue_make_request() to dm.c:alloc_dev() so that
q->make_request_fn is never NULL during the lifetime of a DM device
(even one that is created without a DM table).

Otherwise generic_make_request() will crash simply by doing:
  dmsetup create -n test
  mount /dev/dm-N /mnt

While at it, move ->congested_data initialization out of
dm.c:alloc_dev() and into the bio-based specific init method.

Reported-by: Stefan Bader 
BugLink: https://bugs.launchpad.net/bugs/1860231
Fixes: ff36ab34583a ("dm: remove request-based logic from make_request_fn wrapper")
Depends-on: c12c9a3c3860c ("dm: various cleanups to md->queue initialization code")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer 
[smb: adjusted for context and dm_init_md_queue() exitsting in older
      kernels, and congested_data embedded in backing_dev_info]
Signed-off-by: Stefan Bader 
Signed-off-by: Greg Kroah-Hartman

scsi: megaraid_sas: Do not initiate OCR if controller is not in ready state

2020-02-14T21:31:10+00:00

commit 6d7537270e3283b92f9b327da9d58a4de40fe8d0 upstream.

Driver initiates OCR if a DCMD command times out. But there is a deadlock
if the driver attempts to invoke another OCR before the mutex lock
(reset_mutex) is released from the previous session of OCR.

This patch takes care of the above scenario using new flag
MEGASAS_FUSION_OCR_NOT_POSSIBLE to indicate if OCR is possible.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1579000882-20246-9-git-send-email-anand.lodnoor@broadcom.com
Signed-off-by: Shivasharan S 
Signed-off-by: Anand Lodnoor 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

pinctrl: sh-pfc: r8a7778: Fix duplicate SDSELF_B and SD1_CLK_B

2020-02-14T21:31:10+00:00

commit 805f635703b2562b5ddd822c62fc9124087e5dd5 upstream.

The FN_SDSELF_B and FN_SD1_CLK_B enum IDs are used twice, which means
one set of users must be wrong.  Replace them by the correct enum IDs.

Fixes: 87f8c988636db0d4 ("sh-pfc: Add r8a7778 pinmux support")
Signed-off-by: Geert Uytterhoeven 
Link: https://lore.kernel.org/r/20191218194812.12741-2-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman

powerpc/pseries: Allow not having ibm, hypertas-functions::hcall-multi-tce for DDW

2020-02-14T21:31:09+00:00

commit 7559d3d295f3365ea7ac0c0274c05e633fe4f594 upstream.

By default a pseries guest supports a H_PUT_TCE hypercall which maps
a single IOMMU page in a DMA window. Additionally the hypervisor may
support H_PUT_TCE_INDIRECT/H_STUFF_TCE which update multiple TCEs at once;
this is advertised via the device tree /rtas/ibm,hypertas-functions
property which Linux converts to FW_FEATURE_MULTITCE.

FW_FEATURE_MULTITCE is checked when dma_iommu_ops is used; however
the code managing the huge DMA window (DDW) ignores it and calls
H_PUT_TCE_INDIRECT even if it is explicitly disabled via
the "multitce=off" kernel command line parameter.

This adds FW_FEATURE_MULTITCE checking to the DDW code path.

This changes tce_build_pSeriesLP to take liobn and page size as
the huge window does not have iommu_table descriptor which usually
the place to store these numbers.

Fixes: 4e8b0cf46b25 ("powerpc/pseries: Add support for dynamic dma windows")
Signed-off-by: Alexey Kardashevskiy 
Reviewed-by: Thiago Jung Bauermann 
Tested-by: Thiago Jung Bauermann 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20191216041924.42318-3-aik@ozlabs.ru
Signed-off-by: Greg Kroah-Hartman

tools/power/acpi: fix compilation error

2020-02-14T21:31:09+00:00

commit 1985f8c7f9a42a651a9750d6fcadc74336d182df upstream.

If we compile tools/acpi target in the top source directory, we'd get a
compilation error showing as bellow:

	# make tools/acpi
	  DESCEND  power/acpi
	  DESCEND  tools/acpidbg
	  CC       tools/acpidbg/acpidbg.o
	Assembler messages:
	Fatal error: can't create /home/lzy/kernel-upstream/power/acpi/\
			tools/acpidbg/acpidbg.o: No such file or directory
	../../Makefile.rules:26: recipe for target '/home/lzy/kernel-upstream/\
			power/acpi/tools/acpidbg/acpidbg.o' failed
	make[3]: *** [/home/lzy/kernel-upstream//power/acpi/tools/acpidbg/\
			acpidbg.o] Error 1
	Makefile:19: recipe for target 'acpidbg' failed
	make[2]: *** [acpidbg] Error 2
	Makefile:54: recipe for target 'acpi' failed
	make[1]: *** [acpi] Error 2
	Makefile:1607: recipe for target 'tools/acpi' failed
	make: *** [tools/acpi] Error 2

Fixes: d5a4b1a540b8 ("tools/power/acpi: Remove direct kernel source include reference")
Signed-off-by: Zhengyuan Liu 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman