linux.git, branch v5.4.60

Linux 5.4.60

2020-08-21T11:05:39+00:00

Tested-by: Guenter Roeck 
Tested-by: Shuah Khan 
Signed-off-by: Greg Kroah-Hartman

drm/amd/display: dchubbub p-state warning during surface planes switch

2020-08-21T11:05:39+00:00

commit 8b0379a85762b516c7b46aed7dbf2a4947c00564 upstream.

[Why]
ramp_up_dispclk_with_dpp is to change dispclk, dppclk and dprefclk
according to bandwidth requirement. call stack: rv1_update_clocks -->
update_clocks --> dcn10_prepare_bandwidth / dcn10_optimize_bandwidth
--> prepare_bandwidth / optimize_bandwidth. before change dcn hw,
prepare_bandwidth will be called first to allow enough clock,
watermark for change, after end of dcn hw change, optimize_bandwidth
is executed to lower clock to save power for new dcn hw settings.

below is sequence of commit_planes_for_stream:
step 1: prepare_bandwidth - raise clock to have enough bandwidth
step 2: lock_doublebuffer_enable
step 3: pipe_control_lock(true) - make dchubp register change will
not take effect right way
step 4: apply_ctx_for_surface - program dchubp
step 5: pipe_control_lock(false) - dchubp register change take effect
step 6: optimize_bandwidth --> dc_post_update_surfaces_to_stream
for full_date, optimize clock to save power

at end of step 1, dcn clocks (dprefclk, dispclk, dppclk) may be
changed for new dchubp configuration. but real dcn hub dchubps are
still running with old configuration until end of step 5. this need
clocks settings at step 1 should not less than that before step 1.
this is checked by two conditions: 1. if (should_set_clock(safe_to_lower
, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) ||
new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz)
2. request_dpp_div = new_clocks->dispclk_khz > new_clocks->dppclk_khz

the second condition is based on new dchubp configuration. dppclk
for new dchubp may be different from dppclk before step 1.
for example, before step 1, dchubps are as below:
pipe 0: recout=(0,40,1920,980) viewport=(0,0,1920,979)
pipe 1: recout=(0,0,1920,1080) viewport=(0,0,1920,1080)
for dppclk for pipe0 need dppclk = dispclk

new dchubp pipe split configuration:
pipe 0: recout=(0,0,960,1080) viewport=(0,0,960,1080)
pipe 1: recout=(960,0,960,1080) viewport=(960,0,960,1080)
dppclk only needs dppclk = dispclk /2.

dispclk, dppclk are not lock by otg master lock. they take effect
after step 1. during this transition, dispclk are the same, but
dppclk is changed to half of previous clock for old dchubp
configuration between step 1 and step 6. This may cause p-state
warning intermittently.

[How]
for new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz, we
need make sure dppclk are not changed to less between step 1 and 6.
for new_clocks->dispclk_khz > clk_mgr_base->clks.dispclk_khz,
new display clock is raised, but we do not know ratio of
new_clocks->dispclk_khz and clk_mgr_base->clks.dispclk_khz,
new_clocks->dispclk_khz /2 does not guarantee equal or higher than
old dppclk. we could ignore power saving different between
dppclk = displck and dppclk = dispclk / 2 between step 1 and step 6.
as long as safe_to_lower = false, set dpclk = dispclk to simplify
condition check.

CC: Stable 
Signed-off-by: Hersen Wu 
Reviewed-by: Aric Cyr 
Acked-by: Eryk Brol 
Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: Fix bug where DPM is not enabled after hibernate and resume

2020-08-21T11:05:39+00:00

commit f87812284172a9809820d10143b573d833cd3f75 upstream.

Reproducing bug report here:
After hibernating and resuming, DPM is not enabled. This remains the case
even if you test hibernate using the steps here:
https://www.kernel.org/doc/html/latest/power/basic-pm-debugging.html

I debugged the problem, and figured out that in the file hardwaremanager.c,
in the function, phm_enable_dynamic_state_management(), the check
'if (!hwmgr->pp_one_vf && smum_is_dpm_running(hwmgr) && !amdgpu_passthrough(adev) && adev->in_suspend)'
returns true for the hibernate case, and false for the suspend case.

This means that for the hibernate case, the AMDGPU driver doesn't enable DPM
(even though it should) and simply returns from that function.
In the suspend case, it goes ahead and enables DPM, even though it doesn't need to.

I debugged further, and found out that in the case of suspend, for the
CIK/Hawaii GPUs, smum_is_dpm_running(hwmgr) returns false, while in the case of
hibernate, smum_is_dpm_running(hwmgr) returns true.

For CIK, the ci_is_dpm_running() function calls the ci_is_smc_ram_running() function,
which is ultimately used to determine if DPM is currently enabled or not,
and this seems to provide the wrong answer.

I've changed the ci_is_dpm_running() function to instead use the same method that
some other AMD GPU chips do (e.g Fiji), which seems to read the voltage controller.
I've tested on my R9 390 and it seems to work correctly for both suspend and
hibernate use cases, and has been stable so far.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208839
Signed-off-by: Sandeep Raghuraman 
Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi

2020-08-21T11:05:39+00:00

commit a34a0a632dd991a371fec56431d73279f9c54029 upstream.

drm_dp_mst_allocate_vcpi() invokes
drm_dp_mst_topology_get_port_validated(), which increases the refcount
of the "port".

These reference counting issues take place in two exception handling
paths separately. Either when “slots” is less than 0 or when
drm_dp_init_vcpi() returns a negative value, the function forgets to
reduce the refcnt increased drm_dp_mst_topology_get_port_validated(),
which results in a refcount leak.

Fix these issues by pulling up the error handling when "slots" is less
than 0, and calling drm_dp_mst_topology_put_port() before termination
when drm_dp_init_vcpi() returns a negative value.

Fixes: 1e797f556c61 ("drm/dp: Split drm_dp_mst_allocate_vcpi")
Cc:  # v4.12+
Signed-off-by: Xiyu Yang 
Signed-off-by: Xin Tan 
Signed-off-by: Xin Xiong 
Reviewed-by: Lyude Paul 
Signed-off-by: Lyude Paul 
Link: https://patchwork.freedesktop.org/patch/msgid/20200719154545.GA41231@xin-virtual-machine
Signed-off-by: Greg Kroah-Hartman

drm: Added orientation quirk for ASUS tablet model T103HAF

2020-08-21T11:05:39+00:00

commit b5ac98cbb8e5e30c34ebc837d1e5a3982d2b5f5c upstream.

Signed-off-by: Marius Iacob 
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/20200801123445.1514567-1-themariusus@gmail.com
Signed-off-by: Greg Kroah-Hartman

drm/panfrost: Use kvfree() to free bo->sgts

2020-08-21T11:05:39+00:00

commit 114427b8927a4def2942b2b886f7e4aeae289ccb upstream.

Use kvfree() to free bo->sgts, because the memory is allocated with
kvmalloc_array() in panfrost_mmu_map_fault_addr().

Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Efremov 
Reviewed-by: Steven Price 
Signed-off-by: Steven Price 
Link: https://patchwork.freedesktop.org/patch/msgid/20200608151728.234026-1-efremov@linux.com
Signed-off-by: Greg Kroah-Hartman

arm64: dts: marvell: espressobin: add ethernet alias

2020-08-21T11:05:39+00:00

commit 5253cb8c00a6f4356760efb38bca0e0393aa06de upstream.

The maker of this board and its variants, stores MAC address in U-Boot
environment. Add alias for bootloader to recognise, to which ethernet
node inject the factory MAC address.

Signed-off-by: Tomasz Maciej Nowak 
Signed-off-by: Gregory CLEMENT 
[pali: Backported to 5.4 and older versions]
Signed-off-by: Pali Rohár 
Signed-off-by: Greg Kroah-Hartman

khugepaged: retract_page_tables() remember to test exit

2020-08-21T11:05:39+00:00

commit 18e77600f7a1ed69f8ce46c9e11cad0985712dfa upstream.

Only once have I seen this scenario (and forgot even to notice what forced
the eventual crash): a sequence of "BUG: Bad page map" alerts from
vm_normal_page(), from zap_pte_range() servicing exit_mmap();
pmd:00000000, pte values corresponding to data in physical page 0.

The pte mappings being zapped in this case were supposed to be from a huge
page of ext4 text (but could as well have been shmem): my belief is that
it was racing with collapse_file()'s retract_page_tables(), found *pmd
pointing to a page table, locked it, but *pmd had become 0 by the time
start_pte was decided.

In most cases, that possibility is excluded by holding mmap lock; but
exit_mmap() proceeds without mmap lock.  Most of what's run by khugepaged
checks khugepaged_test_exit() after acquiring mmap lock:
khugepaged_collapse_pte_mapped_thps() and hugepage_vma_revalidate() do so,
for example.  But retract_page_tables() did not: fix that.

The fix is for retract_page_tables() to check khugepaged_test_exit(),
after acquiring mmap lock, before doing anything to the page table.
Getting the mmap lock serializes with __mmput(), which briefly takes and
drops it in __khugepaged_exit(); then the khugepaged_test_exit() check on
mm_users makes sure we don't touch the page table once exit_mmap() might
reach it, since exit_mmap() will be proceeding without mmap lock, not
expecting anyone to be racing with it.

Fixes: f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: Hugh Dickins 
Signed-off-by: Andrew Morton 
Acked-by: Kirill A. Shutemov 
Cc: Andrea Arcangeli 
Cc: Mike Kravetz 
Cc: Song Liu 
Cc: 	[4.8+]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008021215400.27773@eggly.anvils
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

sh: landisk: Add missing initialization of sh_io_port_base

2020-08-21T11:05:38+00:00

[ Upstream commit 0c64a0dce51faa9c706fdf1f957d6f19878f4b81 ]

The Landisk setup code maps the CF IDE area using ioremap_prot(), and
passes the resulting virtual addresses to the pata_platform driver,
disguising them as I/O port addresses.  Hence the pata_platform driver
translates them again using ioport_map().
As CONFIG_GENERIC_IOMAP=n, and CONFIG_HAS_IOPORT_MAP=y, the
SuperH-specific mapping code in arch/sh/kernel/ioport.c translates
I/O port addresses to virtual addresses by adding sh_io_port_base, which
defaults to -1, thus breaking the assumption of an identity mapping.

Fix this by setting sh_io_port_base to zero.

Fixes: 37b7a97884ba64bf ("sh: machvec IO death.")
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Rich Felker 
Signed-off-by: Sasha Levin

perf/x86/rapl: Fix missing psys sysfs attributes

2020-08-21T11:05:38+00:00

[ Upstream commit 4bb5fcb97a5df0bbc0a27e0252b1e7ce140a8431 ]

This fixes a problem introduced by commit:

  5fb5273a905c ("perf/x86/rapl: Use new MSR detection interface")

that perf event sysfs attributes for psys RAPL domain are missing.

Fixes: 5fb5273a905c ("perf/x86/rapl: Use new MSR detection interface")
Signed-off-by: Zhang Rui 
Signed-off-by: Ingo Molnar 
Reviewed-by: Kan Liang 
Reviewed-by: Len Brown 
Acked-by: Jiri Olsa 
Link: https://lore.kernel.org/r/20200811153149.12242-2-rui.zhang@intel.com
Signed-off-by: Sasha Levin