Add basic monitoring support as well as port on/off control for Texas Instruments TPS23861 PoE PSE IC. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210121134434.2782405-2-robert.marko@sartura.hr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
MAX16508 is quite similar to MAX16601, except that it does not support the DEFAULT_NUM_POP register and we thus can not dynamically determine the number of populated phases. Cc: Alex Qiu <xqiu@google.com> Cc: Ugur Usug <Ugur.Usug@maximintegrated.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210125185327.93282-2-linux@roeck-us.net Reviewed-by: Alex Qiu <xqiu@google.com> Tested-by: Alex Qiu <xqiu@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The MAX16601 can report the number of populated phases. Use this information to only create sysfs attributes for populated phases. Cc: Alex Qiu <xqiu@google.com> Cc: Ugur Usug <Ugur.Usug@maximintegrated.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210125185327.93282-1-linux@roeck-us.net Reviewed-by: Alex Qiu <xqiu@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This patch adds a hwmon driver for the AHT10 Temperature and Humidity sensor. It has a maximum sample rate, as the datasheet states that the chip may heat up if it is sampled more than once every two seconds. Has been tested a to work on a raspberrypi0w Signed-off-by: Johannes Cornelis Draaijer (datdenkikniet) <jcdra1@gmail.com> Link: https://lore.kernel.org/r/20210107194014.GA88780@desktop [groeck: dropped AHT10_ADDR (unused) and use AHT10_MEAS_SIZE where appropriate; dropped change log] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested with ASRock X570 Phantom Gaming-ITX/TB3. It also appears on other ASRock boards. Signed-off-by: Blaž Hrastnik <blaz@mxxn.io> Link: https://lore.kernel.org/r/b08d641c-3fb5-4845-85f7-e1753149cd7d@www.fastmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This deletes the ABx500 hwmon driver, the only supported variant being the AB8500. This driver has been replaced by generic frameworks. By inspecting the abx500 sysfs files we see that it contains things such as temp1_max, temp1_max_alarm, temp1_max_hyst, temp1_max_hyst_alarm, temp1_min, temp1_min_alarm. It becomes obvious that the abx500.c is a reimplementation of thermal zones. This is not very strange as the generic thermal zones were not invented when this driver was merged so people were rolling their own. The ab8500.c driver contains conversion tables for handling a thermistor on ADC channels AUX1 and AUX2. I managed to replace the functionality of the driver with: - Activation of the ntc_thermistor.c driver, CONFIG_SENSORS_NTC_THERMISTOR - Activation of thermal zones, CONFIG_THERMAL - In the device tree, connecting the NTC driver to the processed IIO channels from the AB8500 GPADC ADC forming two instances of NTC sensors. - Connecting the two NTC sensors to a "chassis" thermal zone in the device tree and setting that to hit the CPU frequency at 50 degrees celsius and do a critical shutdown at 70 degrees celsius, deploying a policy using the sensors. After talking to the original authors we concluded that the driver was never properly parameterized in production so what we now have in the device tree is already puts the thermistors to better use than what the hwmon driver did. The two remaining channels for two battery temperatures is already handled in the charging algorithms but can be optionally extended to thermal zones as well if we want these to trigger critical shutdown for the platform. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201221125521.768082-1-linus.walleij@linaro.org [groeck: Removed documentation and fixed up Makefile, Kconfig] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Changeset 94f1ab944565 ("dt-bindings: hwmon: convert TI INA2xx bindings to dt-schema")
renamed: Documentation/devicetree/bindings/hwmon/ina2xx.txt
to: Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml.
Update its cross-reference accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/886bd248721b146d844d46e26ddd4cd277f51446.1610535350.git.mchehab+huawei@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Fix Documentation/hwmon/ kernel-doc warning in 5.11-rc1:
lnx-511-rc1/Documentation/hwmon/sbtsi_temp.rst:4: WARNING: Title underline too short.
Kernel driver sbtsi_temp
==================
Fixes: 6ec3fcf556fe ("hwmon: (sbtsi) Add documentation")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Kun Yi <kunyi@google.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Link: https://lore.kernel.org/r/20201229035428.31270-1-rdunlap@infradead.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Document the SB-TSI sensor interface driver. Signed-off-by: Kun Yi <kunyi@google.com> Link: https://lore.kernel.org/r/20201211215427.3281681-3-kunyi@google.com [groeck: Added SPDX license identifier, same as source] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert the Analog Devices ADM1275 bindings to dt-schema. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201117220807.208747-4-krzk@kernel.org [groeck: Removed unnecessary type ($ref) declaration] Signed-off-by: Guenter Roeck <linux@roeck-us.net>