linux.git/arch/arm/boot, branch v5.4.302 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git ARM: dts: imx6ul-kontron-bl-common: Fix RTS polarity for RS485 interface 2025-08-28T14:21:19+00:00 Annette Kobou annette.kobou@kontron.de 2025-07-08T12:24:41+00:00 c1289b6fe3aeb40a48da4b1b6035263b2b73af06 [ Upstream commit 47ef5256124fb939d8157b13ca048c902435cf23 ] The polarity of the DE signal of the transceiver is active-high for sending. Therefore rs485-rts-active-low is wrong and needs to be removed to make RS485 transmissions work. Signed-off-by: Annette Kobou <annette.kobou@kontron.de> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Fixes: 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards") Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 47ef5256124fb939d8157b13ca048c902435cf23 ]

The polarity of the DE signal of the transceiver is active-high for
sending. Therefore rs485-rts-active-low is wrong and needs to be
removed to make RS485 transmissions work.

Signed-off-by: Annette Kobou <annette.kobou@kontron.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Fixes: 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: vfxxx: Correctly use two tuples for timer address 2025-08-28T14:21:18+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2025-05-23T07:19:22+00:00 6ea0251d067f463b6e2d9f284c7488477d118e3c [ Upstream commit f3440dcf8b994197c968fbafe047ce27eed226e8 ] Address and size-cells are 1 and the ftm timer node takes two address spaces in "reg" property, so this should be in two <> tuples. Change has no functional impact, but original code is confusing/less readable. Fixes: 07513e1330a9 ("ARM: dts: vf610: Add Freescale FlexTimer Module timer node.") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f3440dcf8b994197c968fbafe047ce27eed226e8 ]

Address and size-cells are 1 and the ftm timer node takes two address
spaces in "reg" property, so this should be in two <> tuples.  Change
has no functional impact, but original code is confusing/less readable.

Fixes: 07513e1330a9 ("ARM: dts: vf610: Add Freescale FlexTimer Module timer node.")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: am335x-bone-common: Increase MDIO reset deassert delay to 50ms 2025-06-27T10:02:57+00:00 Geert Uytterhoeven geert+renesas@glider.be 2024-10-31T09:29:51+00:00 0fee1b2b48c02dc081b4028f62daf5f98b7dbb40 commit 929d8490f8790164f5f63671c1c58d6c50411cb2 upstream. Commit b9bf5612610aa7e3 ("ARM: dts: am335x-bone-common: Increase MDIO reset deassert time") already increased the MDIO reset deassert delay from 6.5 to 13 ms, but this may still cause Ethernet PHY probe failures: SMSC LAN8710/LAN8720 4a101000.mdio:00: probe with driver SMSC LAN8710/LAN8720 failed with error -5 On BeagleBone Black Rev. C3, ETH_RESETn is controlled by an open-drain AND gate. It is pulled high by a 10K resistor, and has a 4.7µF capacitor to ground, giving an RC time constant of 47ms. As it takes 0.7RC to charge the capacitor above the threshold voltage of a CMOS input (VDD/2), the delay should be at least 33ms. Considering the typical tolerance of 20% on capacitors, 40ms would be safer. Add an additional safety margin and settle for 50ms. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/9002a58daa1b2983f39815b748ee9d2f8dcc4829.1730366936.git.geert+renesas@glider.be Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 929d8490f8790164f5f63671c1c58d6c50411cb2 upstream.

Commit b9bf5612610aa7e3 ("ARM: dts: am335x-bone-common: Increase MDIO
reset deassert time") already increased the MDIO reset deassert delay
from 6.5 to 13 ms, but this may still cause Ethernet PHY probe failures:

    SMSC LAN8710/LAN8720 4a101000.mdio:00: probe with driver SMSC LAN8710/LAN8720 failed with error -5

On BeagleBone Black Rev. C3, ETH_RESETn is controlled by an open-drain
AND gate.  It is pulled high by a 10K resistor, and has a 4.7µF
capacitor to ground, giving an RC time constant of 47ms.  As it takes
0.7RC to charge the capacitor above the threshold voltage of a CMOS
input (VDD/2), the delay should be at least 33ms.  Considering the
typical tolerance of 20% on capacitors, 40ms would be safer.  Add an
additional safety margin and settle for 50ms.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/9002a58daa1b2983f39815b748ee9d2f8dcc4829.1730366936.git.geert+renesas@glider.be
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: am335x-bone-common: Increase MDIO reset deassert time 2025-06-27T10:02:57+00:00 Colin Foster colin.foster@in-advantage.com 2024-05-31T18:38:17+00:00 b9ffe75f36b74fbaf5ee450d5ef6d36da60c60b3 commit b9bf5612610aa7e38d58fee16f489814db251c01 upstream. Prior to commit df16c1c51d81 ("net: phy: mdio_device: Reset device only when necessary") MDIO reset deasserts were performed twice during boot. Now that the second deassert is no longer performed, device probe failures happen due to the change in timing with the following error message: SMSC LAN8710/LAN8720: probe of 4a101000.mdio:00 failed with error -5 Restore the original effective timing, which resolves the probe failures. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Link: https://lore.kernel.org/r/20240531183817.2698445-1-colin.foster@in-advantage.com Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b9bf5612610aa7e38d58fee16f489814db251c01 upstream.

Prior to commit df16c1c51d81 ("net: phy: mdio_device: Reset device only
when necessary") MDIO reset deasserts were performed twice during boot.
Now that the second deassert is no longer performed, device probe
failures happen due to the change in timing with the following error
message:

SMSC LAN8710/LAN8720: probe of 4a101000.mdio:00 failed with error -5

Restore the original effective timing, which resolves the probe
failures.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20240531183817.2698445-1-colin.foster@in-advantage.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 board 2025-06-27T10:02:57+00:00 Shengyu Qu wiagn233@outlook.com 2023-08-06T08:50:44+00:00 6a4c1721a7059c2282f4ecf4e5911dee9cc2c46b commit 623cef652768860bd5f205fb7b741be278585fba upstream. This patch adds ethernet PHY reset GPIO config for Beaglebone Black series boards with revision C3. This fixes a random phy startup failure bug discussed at [1]. The GPIO pin used for reset is not used on older revisions, so it is ok to apply to all board revisions. The reset timing was discussed and tested at [2]. [1] https://forum.digikey.com/t/ethernet-device-is-not-detecting-on-ubuntu-20-04-lts-on-bbg/19948 [2] https://forum.beagleboard.org/t/recognizing-a-beaglebone-black-rev-c3-board/31249/ Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Shengyu Qu <wiagn233@outlook.com> Message-ID: <TY3P286MB26113797A3B2EC7E0348BBB2980FA@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 623cef652768860bd5f205fb7b741be278585fba upstream.

This patch adds ethernet PHY reset GPIO config for Beaglebone Black
series boards with revision C3. This fixes a random phy startup failure
bug discussed at [1]. The GPIO pin used for reset is not used on older
revisions, so it is ok to apply to all board revisions. The reset timing
was discussed and tested at [2].

[1] https://forum.digikey.com/t/ethernet-device-is-not-detecting-on-ubuntu-20-04-lts-on-bbg/19948
[2] https://forum.beagleboard.org/t/recognizing-a-beaglebone-black-rev-c3-board/31249/

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Message-ID: <TY3P286MB26113797A3B2EC7E0348BBB2980FA@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: qcom: apq8064 merge hw splinlock into corresponding syscon device 2025-06-27T10:02:47+00:00 Dmitry Baryshkov dmitry.baryshkov@oss.qualcomm.com 2025-03-18T13:22:00+00:00 4e4c974ab46ff71d3b6268468608dce69079e53f [ Upstream commit 325c6a441ae1f8fcb1db9bb945b8bdbd3142141e ] Follow up the expected way of describing the SFPB hwspinlock and merge hwspinlock node into corresponding syscon node, fixing several dt-schema warnings. Fixes: 24a9baf933dc ("ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-7-bcedd1406790@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 325c6a441ae1f8fcb1db9bb945b8bdbd3142141e ]

Follow up the expected way of describing the SFPB hwspinlock and merge
hwspinlock node into corresponding syscon node, fixing several dt-schema
warnings.

Fixes: 24a9baf933dc ("ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-7-bcedd1406790@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: at91: at91sam9263: fix NAND chip selects 2025-06-27T10:02:47+00:00 Wolfram Sang wsa+renesas@sang-engineering.com 2025-04-02T21:04:46+00:00 21bcf72e9773325e349e7885155fe3d428f3fc45 [ Upstream commit c72ede1c24be689733bcd2233a3a56f2478429c8 ] NAND did not work on my USB-A9263. I discovered that the offending commit converted the PIO bank for chip selects wrongly, so all A9263 boards need to be fixed. Fixes: 1004a2977bdc ("ARM: dts: at91: Switch to the new NAND bindings") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20250402210446.5972-2-wsa+renesas@sang-engineering.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c72ede1c24be689733bcd2233a3a56f2478429c8 ]

NAND did not work on my USB-A9263. I discovered that the offending
commit converted the PIO bank for chip selects wrongly, so all A9263
boards need to be fixed.

Fixes: 1004a2977bdc ("ARM: dts: at91: Switch to the new NAND bindings")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20250402210446.5972-2-wsa+renesas@sang-engineering.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: at91: usb_a9263: fix GPIO for Dataflash chip select 2025-06-27T10:02:47+00:00 Wolfram Sang wsa+renesas@sang-engineering.com 2025-04-04T11:27:43+00:00 d5373a0af2bd44fa3f8804538925ed9bba373449 [ Upstream commit 67ba341e57ab158423818ed33bfa1c40eb0e5e7e ] Dataflash did not work on my board. After checking schematics and using the proper GPIO, it works now. Also, make it active low to avoid: flash@0 enforce active low on GPIO handle Fixes: 2432d201468d ("ARM: at91: dt: usb-a9263: add dataflash support") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250404112742.67416-2-wsa+renesas@sang-engineering.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 67ba341e57ab158423818ed33bfa1c40eb0e5e7e ]

Dataflash did not work on my board. After checking schematics and using
the proper GPIO, it works now. Also, make it active low to avoid:

flash@0 enforce active low on GPIO handle

Fixes: 2432d201468d ("ARM: at91: dt: usb-a9263: add dataflash support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250404112742.67416-2-wsa+renesas@sang-engineering.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: tegra: Switch DSI-B clock parent to PLLD on Tegra114 2025-06-04T12:32:31+00:00 Svyatoslav Ryhel clamor95@gmail.com 2025-02-26T10:56:11+00:00 b468b0d85f18069c6fd8bf8a645eff35b42c8c97 [ Upstream commit 2b3db788f2f614b875b257cdb079adadedc060f3 ] PLLD is usually used as parent clock for internal video devices, like DSI for example, while PLLD2 is used as parent for HDMI. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Link: https://lore.kernel.org/r/20250226105615.61087-3-clamor95@gmail.com Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2b3db788f2f614b875b257cdb079adadedc060f3 ]

PLLD is usually used as parent clock for internal video devices, like
DSI for example, while PLLD2 is used as parent for HDMI.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250226105615.61087-3-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: mediatek: mt7623: fix IR nodename 2025-03-13T11:42:57+00:00 Rafał Miłecki rafal@milecki.pl 2024-06-17T09:46:33+00:00 e87fee8392b2ffd0b3441c7d4f2cb31e3a484f3a [ Upstream commit 90234cf9b37c57201a24b78c217a91a8af774109 ] Fix following validation error: arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dtb: cir@10013000: $nodename:0: 'cir@10013000' does not match '^ir(-receiver)?(@[a-f0-9]+)?$' from schema $id: http://devicetree.org/schemas/media/mediatek,mt7622-cir.yaml# Fixes: 91044f38dae7 ("arm: dts: mt7623: add ir nodes to the mt7623.dtsi file") Cc: linux-media@vger.kernel.org Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20240617094634.23173-1-zajec5@gmail.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 90234cf9b37c57201a24b78c217a91a8af774109 ]

Fix following validation error:
arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dtb: cir@10013000: $nodename:0: 'cir@10013000' does not match '^ir(-receiver)?(@[a-f0-9]+)?$'
        from schema $id: http://devicetree.org/schemas/media/mediatek,mt7622-cir.yaml#

Fixes: 91044f38dae7 ("arm: dts: mt7623: add ir nodes to the mt7623.dtsi file")
Cc: linux-media@vger.kernel.org
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20240617094634.23173-1-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>