The driver core ignores the return value of struct bus_type::remove
because there is only little that can be done. To simplify the quest to
make this function return void, let struct locomo_driver::remove return
void, too. All users already unconditionally return 0, this commit makes
it obvious that returning an error code is a bad idea and ensures future
users behave accordingly.

Link: https://lore.kernel.org/r/20201126110140.2021758-1-u.kleine-koenig@pengutronix.de

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

The driver core ignores the return value of struct device_driver::remove
because there is only little that can be done. To simplify the quest to
make this function return void, let struct sa1111_driver::remove return
void, too. All users already unconditionally return 0, this commit makes
it obvious that returning an error code is a bad idea and ensures future
users behave accordingly.

Link: https://lore.kernel.org/r/20201126114724.2028511-1-u.kleine-koenig@pengutronix.de
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Ensure the dmabounce functions are available for all Kconfig
permutations.

Fixes: 0a0f0d8be76d ("dma-mapping: split <linux/dma-mapping.h>")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Split out all the bits that are purely for dma_map_ops implementations
and related code into a new <linux/dma-map-ops.h> header so that they
don't get pulled into all the drivers.  That also means the architecture
specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h>
any more, which leads to a missing includes that were pulled in by the
x86 or arm versions in a few not overly portable drivers.

Signed-off-by: Christoph Hellwig <hch@lst.de>

Move the helpers to translate to and from direct mapping DMA addresses
to dma-direct.h.  This not only is the most logical place, but the new
placement also avoids dependency loops with pending commits.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>

Pull sched/fifo updates from Ingo Molnar:
 "This adds the sched_set_fifo*() encapsulation APIs to remove static
  priority level knowledge from non-scheduler code.

  The three APIs for non-scheduler code to set SCHED_FIFO are:

   - sched_set_fifo()
   - sched_set_fifo_low()
   - sched_set_normal()

  These are two FIFO priority levels: default (high), and a 'low'
  priority level, plus sched_set_normal() to set the policy back to
  non-SCHED_FIFO.

  Since the changes affect a lot of non-scheduler code, we kept this in
  a separate tree"

* tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  sched,tracing: Convert to sched_set_fifo()
  sched: Remove sched_set_*() return value
  sched: Remove sched_setscheduler*() EXPORTs
  sched,psi: Convert to sched_set_fifo_low()
  sched,rcutorture: Convert to sched_set_fifo_low()
  sched,rcuperf: Convert to sched_set_fifo_low()
  sched,locktorture: Convert to sched_set_fifo()
  sched,irq: Convert to sched_set_fifo()
  sched,watchdog: Convert to sched_set_fifo()
  sched,serial: Convert to sched_set_fifo()
  sched,powerclamp: Convert to sched_set_fifo()
  sched,ion: Convert to sched_set_normal()
  sched,powercap: Convert to sched_set_fifo*()
  sched,spi: Convert to sched_set_fifo*()
  sched,mmc: Convert to sched_set_fifo*()
  sched,ivtv: Convert to sched_set_fifo*()
  sched,drm/scheduler: Convert to sched_set_fifo*()
  sched,msm: Convert to sched_set_fifo*()
  sched,psci: Convert to sched_set_fifo*()
  sched,drbd: Convert to sched_set_fifo*()
  ...

The it8152 PCI host controller was only used by cm-x2xx platforms.
Since these platforms were removed, there is no point to keep it8152
driver.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.

In this case, use fifo_low, because it only cares about being above
SCHED_NORMAL. Effectively no change in behaviour.

Cc: rmk+kernel@arm.linux.org.uk
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>

The irq_retrigger callback is supposed to return 0 when retrigger
has failed, and a non-zero value otherwise. Tell the core code
that the driver has succedded in using the HW to retrigger the
interrupt (if ever).

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200310184921.23552-4-maz@kernel.org

This is a GPIO driver so it should include
<linux/gpio/driver.h> not <linux/gpio.h>

Link: https://lore.kernel.org/r/20190820103429.7028-1-linus.walleij@linaro.org
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>