linux.git/arch/arm/kernel/fiq.c, branch v5.16.1

arm: fix the flush_icache_range arguments in set_fiq_handler

2020-06-08T18:05:57+00:00

Patch series "sort out the flush_icache_range mess", v2.

flush_icache_range is mostly used for kernel address, except for the
following cases:

 - the nommu brk and mmap implementations

 - the read_code helper that is only used for binfmt_flat,
   binfmt_elf_fdpic, and binfmt_aout including the broken
   ia32 compat version

 - binfmt_flat itself

none of which really are used by a typical MMU enabled kernel, as a.out
can only be build for alpha and m68k to start with.

But strangely enough commit ae92ef8a4424 ("PATCH] flush icache in
correct context") added a "set_fs(KERNEL_DS)" around the
flush_icache_range call in the module loader, because apparently m68k
assumed user pointers.

This series first cleans up the cacheflush implementations, largely by
switching as much as possible to the asm-generic version after a few
preparations, then moves the misnamed current flush_icache_user_range to
a new name, to finally introduce a real flush_icache_user_range to be
used for the above use cases to flush the instruction cache for a
userspace address range.  The last patch then drops the set_fs in the
module code and moves it into the m68k implementation.

This patch (of 29):

The arguments passed look bogus, try to fix them to something that seems
to make sense.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Roman Zippel 
Cc: Jessica Yu 
Cc: Michal Simek 
Cc: Albert Ou 
Cc: Alexander Shishkin 
Cc: Alexander Viro 
Cc: Alexei Starovoitov 
Cc: Anton Ivanov 
Cc: Arnaldo Carvalho de Melo 
Cc: Aurelien Jacquiot 
Cc: Benjamin Herrenschmidt 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Christoph Hellwig 
Cc: Chris Zankel 
Cc: Daniel Borkmann 
Cc: Dan Williams 
Cc: Dave Jiang 
Cc: "David S. Miller" 
Cc: Fenghua Yu 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: Ira Weiny 
Cc: Ivan Kokshaysky 
Cc: Jeff Dike 
Cc: Jiri Olsa 
Cc: Jonas Bonn 
Cc: Keith Busch 
Cc: Mark Rutland 
Cc: Mark Salter 
Cc: Martin KaFai Lau 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Namhyung Kim 
Cc: Nick Piggin 
Cc: Palmer Dabbelt 
Cc: Palmer Dabbelt 
Cc: Paul Mackerras 
Cc: Paul Walmsley 
Cc: Peter Zijlstra 
Cc: Richard Henderson 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Song Liu 
Cc: Stafford Horne 
Cc: Stefan Kristiansson 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vishal Verma 
Cc: Will Deacon 
Cc: Yonghong Song 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200515143646.3857579-1-hch@lst.de
Link: http://lkml.kernel.org/r/20200515143646.3857579-2-hch@lst.de
Signed-off-by: Linus Torvalds

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

ARM: convert printk(KERN_* to pr_*

2014-11-21T15:24:50+00:00

Convert many (but not all) printk(KERN_* to pr_* to simplify the code.
We take the opportunity to join some printk lines together so we don't
split the message across several lines, and we also add a few levels
to some messages which were previously missing them.

Tested-by: Andrew Lunn 
Tested-by: Felipe Balbi 
Signed-off-by: Russell King

ARM: 8150/3: fiq: Replace default FIQ handler

2014-09-17T23:35:18+00:00

This patch introduces a new default FIQ handler that is structured in a
similar way to the existing ARM exception handler and result in the FIQ
being handled by C code running on the SVC stack (despite this code run
in the FIQ handler is subject to severe limitations with respect to
locking making normal interaction with the kernel impossible).

This default handler allows concepts that on x86 would be handled using
NMIs to be realized on ARM.

Credit:

    This patch is a near complete re-write of a patch originally
    provided by Anton Vorontsov. Today only a couple of small fragments
    survive, however without Anton's work to build from this patch would
    not exist. Thanks also to Russell King for spoonfeeding me a variety
    of fixes during the review cycle.

Signed-off-by: Daniel Thompson 
Cc: Catalin Marinas 
Acked-by: Nicolas Pitre 
Signed-off-by: Russell King

ARM: 7819/1: fiq: Cast the first argument of flush_icache_range()

2013-08-19T23:11:50+00:00

Commit 2ba85e7af4 (ARM: Fix FIQ code on VIVT CPUs) causes the following build warning:

arch/arm/kernel/fiq.c:92:3: warning: passing argument 1 of 'cpu_cache.coherent_kern_range' makes integer from pointer without a cast [enabled by default]

Cast it as '(unsigned long)base' to avoid the warning.

Signed-off-by: Fabio Estevam 
Signed-off-by: Russell King

ARM: Fix FIQ code on VIVT CPUs

2013-08-08T11:03:29+00:00

Aaro Koskinen reports the following oops:
Installing fiq handler from c001b110, length 0x164
Unable to handle kernel paging request at virtual address ffff1224
pgd = c0004000
[ffff1224] *pgd=00000000, *pte=11fff0cb, *ppte=11fff00a
...
[] (set_fiq_handler+0x0/0x6c) from [] (ams_delta_init_fiq+0xa8/0x160)
 r6:00000164 r5:c001b110 r4:00000000 r3:fefecb4c
[] (ams_delta_init_fiq+0x0/0x160) from [] (ams_delta_init+0xd4/0x114)
 r6:00000000 r5:fffece10 r4:c037a9e0
[] (ams_delta_init+0x0/0x114) from [] (customize_machine+0x24/0x30)

This is because the vectors page is now write-protected, and to change
code in there we must write to its original alias.  Make that change,
and adjust the cache flushing such that the code will become visible
to the instruction stream on VIVT CPUs.

Reported-by: Aaro Koskinen 
Tested-by: Aaro Koskinen 
Signed-off-by: Russell King

ARM: update FIQ support for relocation of vectors

2013-07-31T20:34:56+00:00

FIQ should no longer copy the FIQ code into the user visible vector
page.  Instead, it should use the hidden page.  This change makes
that happen.

Cc: 
Acked-by: Nicolas Pitre 
Signed-off-by: Russell King

ARM: fiq: change FIQ_START to a variable

2012-07-01T13:59:19+00:00

The commit a2be01b (ARM: only include mach/irqs.h for !SPARSE_IRQ)
makes mach/irqs.h only be included for !SPARSE_IRQ build.  There are
a nubmer of platforms have FIQ_START defined in mach/irqs.h for FIQ
support.

  arch/arm/mach-rpc/include/mach/irqs.h:#define FIQ_START         64
  arch/arm/mach-s3c24xx/include/mach/irqs.h:#define FIQ_START             IRQ_EINT0
  arch/arm/plat-mxc/include/mach/irqs.h:#define FIQ_START 0

If SPARSE_IRQ is enabled for any of these platforms, the following
compile error will be seen.

  arch/arm/kernel/fiq.c: In function ‘enable_fiq’:
  arch/arm/kernel/fiq.c:127:19: error: ‘FIQ_START’ undeclared (first use in this function)
  arch/arm/kernel/fiq.c:127:19: note: each undeclared identifier is reported only once for each function it appears in
  arch/arm/kernel/fiq.c: In function ‘disable_fiq’:
  arch/arm/kernel/fiq.c:132:20: error: ‘FIQ_START’ undeclared (first use in this function)

The patch changes fiq code to have init_FIQ take FIQ_START from
platforms as a parameter and assign it to variable fiq_start which
is to replace FIQ_START uses in enable_fiq/disable_fiq.

Signed-off-by: Shawn Guo 
Cc: Kukjin Kim 
Cc: Sascha Hauer 
Cc: Rob Herring 
Acked-by: Russell King

ARM: move CP15 definitions to separate header file

2012-03-28T17:30:01+00:00

Avoid namespace conflicts with drivers over the CP15 definitions by
moving CP15 related prototypes and definitions to a private header
file.

Acked-by: Stephen Warren 
Tested-by: Stephen Warren  [Tegra]
Acked-by: H Hartley Sweeten 
Tested-by: H Hartley Sweeten  [EP93xx]
Acked-by: Nicolas Pitre 
Acked-by: Kukjin Kim 
Signed-off-by: Russell King 
Signed-off-by: David Howells

ARM: 6938/1: fiq: Refactor {get,set}_fiq_regs() for Thumb-2

2011-05-26T09:31:06+00:00

 * To remove the risk of inconvenient register allocation decisions
   by the compiler, these functions are separated out as pure
   assembler.

 * The apcs frame manipulation code is not applicable for Thumb-2
   (and also not easily compatible).  Since it's not essential to
   have a full frame on these leaf assembler functions, the frame
   manipulation is removed, in the interests of simplicity.

 * Split up ldm/stm instructions to be compatible with Thumb-2,
   as well as avoiding instruction forms deprecated on >= ARMv7.

Signed-off-by: Dave Martin 
Reviewed-by: Nicolas Pitre 
Signed-off-by: Russell King