linux.git/arch/arm/kernel/ftrace.c, branch v4.14.82

ARM: 8678/1: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS

2017-06-18T21:25:16+00:00

The DYNAMIC_FTRACE_WITH_REGS configuration makes it possible for a
ftrace operation to specify if registers need to saved/restored by
the ftrace handler. This is needed by kgraft and possibly other
ftrace-based tools, and the ARM architecture is currently lacking
this feature. It would also be the first step to support the
"Kprobes-on-ftrace" optimization on ARM.

This patch introduces a new ftrace handler that stores the registers
on the stack before calling the next stage. The registers are restored
from the stack before going back to the instrumented function.

A side-effect of this patch is to activate the support for
ftrace_modify_call() as it defines ARCH_SUPPORTS_FTRACE_OPS for the
ARM architecture.

Signed-off-by: Abel Vesa 
Signed-off-by: Russell King

Merge branch 'akpm' (patches from Andrew)

2017-05-09T01:17:56+00:00

Merge more updates from Andrew Morton:

 - the rest of MM

 - various misc things

 - procfs updates

 - lib/ updates

 - checkpatch updates

 - kdump/kexec updates

 - add kvmalloc helpers, use them

 - time helper updates for Y2038 issues. We're almost ready to remove
   current_fs_time() but that awaits a btrfs merge.

 - add tracepoints to DAX

* emailed patches from Andrew Morton : (114 commits)
  drivers/staging/ccree/ssi_hash.c: fix build with gcc-4.4.4
  selftests/vm: add a test for virtual address range mapping
  dax: add tracepoint to dax_insert_mapping()
  dax: add tracepoint to dax_writeback_one()
  dax: add tracepoints to dax_writeback_mapping_range()
  dax: add tracepoints to dax_load_hole()
  dax: add tracepoints to dax_pfn_mkwrite()
  dax: add tracepoints to dax_iomap_pte_fault()
  mtd: nand: nandsim: convert to memalloc_noreclaim_*()
  treewide: convert PF_MEMALLOC manipulations to new helpers
  mm: introduce memalloc_noreclaim_{save,restore}
  mm: prevent potential recursive reclaim due to clearing PF_MEMALLOC
  mm/huge_memory.c: deposit a pgtable for DAX PMD faults when required
  mm/huge_memory.c: use zap_deposited_table() more
  time: delete CURRENT_TIME_SEC and CURRENT_TIME
  gfs2: replace CURRENT_TIME with current_time
  apparmorfs: replace CURRENT_TIME with current_time()
  lustre: replace CURRENT_TIME macro
  fs: ubifs: replace CURRENT_TIME_SEC with current_time
  fs: ufs: use ktime_get_real_ts64() for birthtime
  ...

arm: use set_memory.h header

2017-05-09T00:15:13+00:00

set_memory_* functions have moved to set_memory.h.  Switch to this
explicitly

Link: http://lkml.kernel.org/r/1488920133-27229-3-git-send-email-labbott@redhat.com
Signed-off-by: Laura Abbott 
Acked-by: Russell King 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ARM: 8668/1: ftrace: Fix dynamic ftrace with DEBUG_RODATA and !FRAME_POINTER

2017-04-20T10:19:43+00:00

The support for dynamic ftrace with CONFIG_DEBUG_RODATA involves
overriding the weak arch_ftrace_update_code() with a variant which makes
the kernel text writable around the patching.

This override was however added under the CONFIG_OLD_MCOUNT ifdef, and
CONFIG_OLD_MCOUNT is only enabled if frame pointers are enabled.

This leads to non-functional dynamic ftrace (ftrace triggers a
WARN_ON()) when CONFIG_DEBUG_RODATA is enabled and CONFIG_FRAME_POINTER
is not.

Move the override out of that ifdef and into the CONFIG_DYNAMIC_FTRACE
ifdef where it belongs.

Fixes: 80d6b0c2eed2a ("ARM: mm: allow text and rodata sections to be read-only")
Suggested-by: Nicolai Stange 
Suggested-by: Rabin Vincent 
Signed-off-by: Abel Vesa 
Acked-by: Rabin Vincent 
Signed-off-by: Russell King

ftrace: Add return address pointer to ftrace_ret_stack

2016-08-24T10:15:14+00:00

Storing this value will help prevent unwinders from getting out of sync
with the function graph tracer ret_stack.  Now instead of needing a
stateful iterator, they can compare the return address pointer to find
the right ret_stack entry.

Note that an array of 50 ftrace_ret_stack structs is allocated for every
task.  So when an arch implements this, it will add either 200 or 400
bytes of memory usage per task (depending on whether it's a 32-bit or
64-bit platform).

Signed-off-by: Josh Poimboeuf 
Acked-by: Steven Rostedt 
Cc: Andy Lutomirski 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Byungchul Park 
Cc: Denys Vlasenko 
Cc: Frederic Weisbecker 
Cc: H. Peter Anvin 
Cc: Kees Cook 
Cc: Linus Torvalds 
Cc: Nilay Vaish 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/a95cfcc39e8f26b89a430c56926af0bb217bc0a1.1471607358.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar

ARM: kprobes: enable OPTPROBES for ARM 32

2015-01-13T16:10:17+00:00

This patch introduce kprobeopt for ARM 32.

Limitations:
 - Currently only kernel compiled with ARM ISA is supported.

 - Offset between probe point and optinsn slot must not larger than
   32MiB. Masami Hiramatsu suggests replacing 2 words, it will make
   things complex. Futher patch can make such optimization.

Kprobe opt on ARM is relatively simpler than kprobe opt on x86 because
ARM instruction is always 4 bytes aligned and 4 bytes long. This patch
replace probed instruction by a 'b', branch to trampoline code and then
calls optimized_callback(). optimized_callback() calls opt_pre_handler()
to execute kprobe handler. It also emulate/simulate replaced instruction.

When unregistering kprobe, the deferred manner of unoptimizer may leave
branch instruction before optimizer is called. Different from x86_64,
which only copy the probed insn after optprobe_template_end and
reexecute them, this patch call singlestep to emulate/simulate the insn
directly. Futher patch can optimize this behavior.

Signed-off-by: Wang Nan 
Acked-by: Masami Hiramatsu 
Cc: Will Deacon 
Reviewed-by: Jon Medhurst (Tixy) 
Signed-off-by: Jon Medhurst

ARM: mm: allow text and rodata sections to be read-only

2014-10-16T21:38:54+00:00

This introduces CONFIG_DEBUG_RODATA, making kernel text and rodata
read-only. Additionally, this splits rodata from text so that rodata can
also be NX, which may lead to wasted memory when aligning to SECTION_SIZE.
The read-only areas are made writable during ftrace updates and kexec.

Signed-off-by: Kees Cook 
Tested-by: Laura Abbott 
Acked-by: Nicolas Pitre

ARM: 8022/1: ftrace: work with CONFIG_DEBUG_SET_MODULE_RONX

2014-04-23T00:24:31+00:00

Make ftrace work with CONFIG_DEBUG_SET_MODULE_RONX by making module text
writable around the place where ftrace does its work, like it is done on
x86 in the patch which introduced CONFIG_DEBUG_SET_MODULE_RONX,
84e1c6bb38eb ("x86: Add RO/NX protection for loadable kernel modules").

Tested-by: Mitchel Humpherys 
Signed-off-by: Rabin Vincent 
Signed-off-by: Russell King

ftrace: Do not pass data to ftrace_dyn_arch_init

2014-03-07T15:06:14+00:00

As the data parameter is not really used by any ftrace_dyn_arch_init,
remove that from ftrace_dyn_arch_init. This also removes the addr
local variable from ftrace_init which is now unused.

Note the documentation was imprecise as it did not suggest to set
(*data) to 0.

Link: http://lkml.kernel.org/r/1393268401-24379-4-git-send-email-jslaby@suse.cz

Cc: Frederic Weisbecker 
Cc: Ingo Molnar 
Cc: linux-arch@vger.kernel.org
Signed-off-by: Jiri Slaby 
Signed-off-by: Steven Rostedt

ftrace: Pass retval through return in ftrace_dyn_arch_init()

2014-03-07T15:06:13+00:00

No architecture uses the "data" parameter in ftrace_dyn_arch_init() in any
way, it just sets the value to 0. And this is used as a return value
in the caller -- ftrace_init, which just checks the retval against
zero.

Note there is also "return 0" in every ftrace_dyn_arch_init.  So it is
enough to check the retval and remove all the indirect sets of data on
all archs.

Link: http://lkml.kernel.org/r/1393268401-24379-3-git-send-email-jslaby@suse.cz

Cc: linux-arch@vger.kernel.org
Signed-off-by: Jiri Slaby 
Signed-off-by: Steven Rostedt