linux.git/arch/arm/kernel/kgdb.c, branch v4.14.154 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02T10:10:55+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2017-11-01T14:07:57+00:00 b24413180f5600bcb3bb70fbed5cf186b60864bd Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scripts/spelling.txt: add regsiter -> register spelling mistake 2017-05-09T00:15:13+00:00 Stephen Boyd sboyd@codeaurora.org 2017-05-08T22:57:50+00:00 ad61dd303a0f2439bb104349e2d2ec91a3010ce0 This typo is quite common. Fix it and add it to the spelling file so that checkpatch catches it earlier. Link: http://lkml.kernel.org/r/20170317011131.6881-2-sboyd@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
This typo is quite common.  Fix it and add it to the spelling file so
that checkpatch catches it earlier.

Link: http://lkml.kernel.org/r/20170317011131.6881-2-sboyd@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ARM: 8428/1: kgdb: Fix registers on sleeping tasks 2015-10-03T15:36:45+00:00 Doug Anderson armlinux@m.disordat.com 2015-09-02T02:39:19+00:00 001bf455d20645190beb98ff4ee450dfea1b7eb2 Dumping registers from other sleeping tasks in KGDB was totally failing for me. All registers were reported as 0 in many cases. The code was using task_pt_regs(task) to try to get other thread registers. This doesn't appear to be the right place to look. From my tests, I saw non-zero values in this structure when we were looking at a kernel thread that had a userspace task associated with it, but it contained the register values from the userspace task. So even in the cases where registers weren't reported as 0 we were still not showing the right thing. Instead of using task_pt_regs(task) let's use task_thread_info(task). This is the same place that is referred to when doing a dump of all sleeping task stacks (kdb_show_stack() -> show_stack() -> dump_backtrace() -> unwind_backtrace() -> thread_saved_sp()). As further evidence that this is the right thing to do, you can find the following comment in "gdbstub.c" right before it calls sleeping_thread_to_gdb_regs(): Pull stuff saved during switch_to; nothing else is accessible (or even particularly relevant). This should be enough for a stack trace. ...and if you look at switch_to() it only saves r4-r11, sp and lr. Those are the same registers that I'm getting out of the task_thread_info(). With this change you can use "info thread" to see all tasks in the kernel and you can switch to other tasks and examine them in gdb. Signed-off-by: Doug Anderson <dianders@chromium.org> Tested-by: Stephen Boyd <sboyd@codeurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Dumping registers from other sleeping tasks in KGDB was totally
failing for me.  All registers were reported as 0 in many cases.

The code was using task_pt_regs(task) to try to get other thread
registers.  This doesn't appear to be the right place to look.  From
my tests, I saw non-zero values in this structure when we were looking
at a kernel thread that had a userspace task associated with it, but
it contained the register values from the userspace task.  So even in
the cases where registers weren't reported as 0 we were still not
showing the right thing.

Instead of using task_pt_regs(task) let's use task_thread_info(task).
This is the same place that is referred to when doing a dump of all
sleeping task stacks (kdb_show_stack() -> show_stack() ->
dump_backtrace() -> unwind_backtrace() -> thread_saved_sp()).

As further evidence that this is the right thing to do, you can find
the following comment in "gdbstub.c" right before it calls
sleeping_thread_to_gdb_regs():
  Pull stuff saved during switch_to; nothing else is accessible (or
  even particularly relevant).  This should be enough for a stack
  trace.
...and if you look at switch_to() it only saves r4-r11, sp and lr.
Those are the same registers that I'm getting out of the
task_thread_info().

With this change you can use "info thread" to see all tasks in the
kernel and you can switch to other tasks and examine them in gdb.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Tested-by: Stephen Boyd <sboyd@codeurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ARM: 8425/1: kgdb: Don't try to stop the machine when setting breakpoints 2015-09-16T22:58:46+00:00 Doug Anderson armlinux@m.disordat.com 2015-08-26T17:26:49+00:00 7ae85dc7687c7e7119053d83d02c560ea217b772 In (23a4e40 arm: kgdb: Handle read-only text / modules) we moved to using patch_text() to set breakpoints so that we could handle the case when we had CONFIG_DEBUG_RODATA. That patch used patch_text(). Unfortunately, patch_text() assumes that we're not in atomic context when it runs since it needs to grab a mutex and also wait for other CPUs to stop (which it does with a completion). This would result in a stack crawl if you had CONFIG_DEBUG_ATOMIC_SLEEP and tried to set a breakpoint in kgdb. The crawl looked something like: BUG: scheduling while atomic: swapper/0/0/0x00010007 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc7-00133-geb63b34 #1073 Hardware name: Rockchip (Device Tree) (unwind_backtrace) from [<c00133d4>] (show_stack+0x20/0x24) (show_stack) from [<c05400e8>] (dump_stack+0x84/0xb8) (dump_stack) from [<c004913c>] (__schedule_bug+0x54/0x6c) (__schedule_bug) from [<c054065c>] (__schedule+0x80/0x668) (__schedule) from [<c0540cfc>] (schedule+0xb8/0xd4) (schedule) from [<c0543a3c>] (schedule_timeout+0x2c/0x234) (schedule_timeout) from [<c05417c0>] (wait_for_common+0xf4/0x188) (wait_for_common) from [<c0541874>] (wait_for_completion+0x20/0x24) (wait_for_completion) from [<c00a0104>] (__stop_cpus+0x58/0x70) (__stop_cpus) from [<c00a0580>] (stop_cpus+0x3c/0x54) (stop_cpus) from [<c00a06c4>] (__stop_machine+0xcc/0xe8) (__stop_machine) from [<c00a0714>] (stop_machine+0x34/0x44) (stop_machine) from [<c00173e8>] (patch_text+0x28/0x34) (patch_text) from [<c001733c>] (kgdb_arch_set_breakpoint+0x40/0x4c) (kgdb_arch_set_breakpoint) from [<c00a0d68>] (kgdb_validate_break_address+0x2c/0x60) (kgdb_validate_break_address) from [<c00a0e90>] (dbg_set_sw_break+0x1c/0xdc) (dbg_set_sw_break) from [<c00a2e88>] (gdb_serial_stub+0x9c4/0xba4) (gdb_serial_stub) from [<c00a11cc>] (kgdb_cpu_enter+0x1f8/0x60c) (kgdb_cpu_enter) from [<c00a18cc>] (kgdb_handle_exception+0x19c/0x1d0) (kgdb_handle_exception) from [<c0016f7c>] (kgdb_compiled_brk_fn+0x30/0x3c) (kgdb_compiled_brk_fn) from [<c00091a4>] (do_undefinstr+0x1a4/0x20c) (do_undefinstr) from [<c001400c>] (__und_svc_finish+0x0/0x34) It turns out that when we're in kgdb all the CPUs are stopped anyway so there's no reason we should be calling patch_text(). We can instead directly call __patch_text() which assumes that CPUs have already been stopped. Fixes: 23a4e4050ba9 ("arm: kgdb: Handle read-only text / modules") Reported-by: Aapo Vienamo <avienamo@nvidia.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
In (23a4e40 arm: kgdb: Handle read-only text / modules) we moved to
using patch_text() to set breakpoints so that we could handle the case
when we had CONFIG_DEBUG_RODATA.  That patch used patch_text().
Unfortunately, patch_text() assumes that we're not in atomic context
when it runs since it needs to grab a mutex and also wait for other
CPUs to stop (which it does with a completion).

This would result in a stack crawl if you had
CONFIG_DEBUG_ATOMIC_SLEEP and tried to set a breakpoint in kgdb.  The
crawl looked something like:

 BUG: scheduling while atomic: swapper/0/0/0x00010007
 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc7-00133-geb63b34 #1073
 Hardware name: Rockchip (Device Tree)
  (unwind_backtrace) from [<c00133d4>] (show_stack+0x20/0x24)
  (show_stack) from [<c05400e8>] (dump_stack+0x84/0xb8)
  (dump_stack) from [<c004913c>] (__schedule_bug+0x54/0x6c)
  (__schedule_bug) from [<c054065c>] (__schedule+0x80/0x668)
  (__schedule) from [<c0540cfc>] (schedule+0xb8/0xd4)
  (schedule) from [<c0543a3c>] (schedule_timeout+0x2c/0x234)
  (schedule_timeout) from [<c05417c0>] (wait_for_common+0xf4/0x188)
  (wait_for_common) from [<c0541874>] (wait_for_completion+0x20/0x24)
  (wait_for_completion) from [<c00a0104>] (__stop_cpus+0x58/0x70)
  (__stop_cpus) from [<c00a0580>] (stop_cpus+0x3c/0x54)
  (stop_cpus) from [<c00a06c4>] (__stop_machine+0xcc/0xe8)
  (__stop_machine) from [<c00a0714>] (stop_machine+0x34/0x44)
  (stop_machine) from [<c00173e8>] (patch_text+0x28/0x34)
  (patch_text) from [<c001733c>] (kgdb_arch_set_breakpoint+0x40/0x4c)
  (kgdb_arch_set_breakpoint) from [<c00a0d68>] (kgdb_validate_break_address+0x2c/0x60)
  (kgdb_validate_break_address) from [<c00a0e90>] (dbg_set_sw_break+0x1c/0xdc)
  (dbg_set_sw_break) from [<c00a2e88>] (gdb_serial_stub+0x9c4/0xba4)
  (gdb_serial_stub) from [<c00a11cc>] (kgdb_cpu_enter+0x1f8/0x60c)
  (kgdb_cpu_enter) from [<c00a18cc>] (kgdb_handle_exception+0x19c/0x1d0)
  (kgdb_handle_exception) from [<c0016f7c>] (kgdb_compiled_brk_fn+0x30/0x3c)
  (kgdb_compiled_brk_fn) from [<c00091a4>] (do_undefinstr+0x1a4/0x20c)
  (do_undefinstr) from [<c001400c>] (__und_svc_finish+0x0/0x34)

It turns out that when we're in kgdb all the CPUs are stopped anyway
so there's no reason we should be calling patch_text().  We can
instead directly call __patch_text() which assumes that CPUs have
already been stopped.

Fixes: 23a4e4050ba9 ("arm: kgdb: Handle read-only text / modules")
Reported-by: Aapo Vienamo <avienamo@nvidia.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ARM: probes: move all probe code to dedicate directory 2015-01-09T09:36:50+00:00 Wang Nan wangnan0@huawei.com 2015-01-09T02:19:49+00:00 fca08f326ae0423f03b097ff54de432fe77b95d0 In discussion on LKML (https://lkml.org/lkml/2014/11/28/158), Russell King suggests to move all probe related code to arch/arm/probes. This patch does the work. Due to dependency on 'arch/arm/kernel/patch.h', this patch also moves patch.h to 'arch/arm/include/asm/patch.h', and related '#include' directives are also midified to '#include <asm/patch.h>'. Following is an overview of this patch: ./arch/arm/kernel/ ./arch/arm/probes/ |-- Makefile |-- Makefile |-- probes-arm.c ==> |-- decode-arm.c |-- probes-arm.h ==> |-- decode-arm.h |-- probes-thumb.c ==> |-- decode-thumb.c |-- probes-thumb.h ==> |-- decode-thumb.h |-- probes.c ==> |-- decode.c |-- probes.h ==> |-- decode.h | |-- kprobes | | |-- Makefile |-- kprobes-arm.c ==> | |-- actions-arm.c |-- kprobes-common.c ==> | |-- actions-common.c |-- kprobes-thumb.c ==> | |-- actions-thumb.c |-- kprobes.c ==> | |-- core.c |-- kprobes.h ==> | |-- core.h |-- kprobes-test-arm.c ==> | |-- test-arm.c |-- kprobes-test.c ==> | |-- test-core.c |-- kprobes-test.h ==> | |-- test-core.h |-- kprobes-test-thumb.c ==> | `-- test-thumb.c | `-- uprobes | |-- Makefile |-- uprobes-arm.c ==> |-- actions-arm.c |-- uprobes.c ==> |-- core.c |-- uprobes.h ==> `-- core.h | `-- patch.h ==> arch/arm/include/asm/patch.h Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Jon Medhurst <tixy@linaro.org> 
In discussion on LKML (https://lkml.org/lkml/2014/11/28/158), Russell
King suggests to move all probe related code to arch/arm/probes. This
patch does the work. Due to dependency on 'arch/arm/kernel/patch.h', this
patch also moves patch.h to 'arch/arm/include/asm/patch.h', and related
'#include' directives are also midified to '#include <asm/patch.h>'.

Following is an overview of this patch:

 ./arch/arm/kernel/               ./arch/arm/probes/
 |-- Makefile                     |-- Makefile
 |-- probes-arm.c          ==>    |-- decode-arm.c
 |-- probes-arm.h          ==>    |-- decode-arm.h
 |-- probes-thumb.c        ==>    |-- decode-thumb.c
 |-- probes-thumb.h        ==>    |-- decode-thumb.h
 |-- probes.c              ==>    |-- decode.c
 |-- probes.h              ==>    |-- decode.h
 |                                |-- kprobes
 |                                |   |-- Makefile
 |-- kprobes-arm.c         ==>    |   |-- actions-arm.c
 |-- kprobes-common.c      ==>    |   |-- actions-common.c
 |-- kprobes-thumb.c       ==>    |   |-- actions-thumb.c
 |-- kprobes.c             ==>    |   |-- core.c
 |-- kprobes.h             ==>    |   |-- core.h
 |-- kprobes-test-arm.c    ==>    |   |-- test-arm.c
 |-- kprobes-test.c        ==>    |   |-- test-core.c
 |-- kprobes-test.h        ==>    |   |-- test-core.h
 |-- kprobes-test-thumb.c  ==>    |   `-- test-thumb.c
 |                                `-- uprobes
 |                                    |-- Makefile
 |-- uprobes-arm.c         ==>        |-- actions-arm.c
 |-- uprobes.c             ==>        |-- core.c
 |-- uprobes.h             ==>        `-- core.h
 |
 `-- patch.h               ==>    arch/arm/include/asm/patch.h

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Jon Medhurst <tixy@linaro.org>
arm: kgdb: Handle read-only text / modules 2014-10-16T21:38:53+00:00 Doug Anderson dianders@chromium.org 2014-04-22T22:14:51+00:00 23a4e4050ba9c98ab67db0980a9fb20e5096d9ea Handle the case where someone has set the text segment of the kernel as read-only by using the newly introduced "patch" mechanism. Signed-off-by: Doug Anderson <dianders@chromium.org> [kees: switched structure size check to BUILD_BUG_ON (sboyd)] Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Nicolas Pitre <nico@linaro.org> 
Handle the case where someone has set the text segment of the kernel
as read-only by using the newly introduced "patch" mechanism.

Signed-off-by: Doug Anderson <dianders@chromium.org>
[kees: switched structure size check to BUILD_BUG_ON (sboyd)]
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
ARM: 8124/1: don't enter kgdb when userspace executes a kgdb break instruction 2014-08-02T14:20:30+00:00 Omar Sandoval osandov@osandov.com 2014-08-01T17:14:06+00:00 6bf755db4d5e7ccea61fb17727a183b9bd8945b1 The kgdb breakpoint hooks (kgdb_brk_fn and kgdb_compiled_brk_fn) should only be entered when a kgdb break instruction is executed from the kernel. Otherwise, if kgdb is enabled, a userspace program can cause the kernel to drop into the debugger by executing either KGDB_BREAKINST or KGDB_COMPILED_BREAK. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
The kgdb breakpoint hooks (kgdb_brk_fn and kgdb_compiled_brk_fn)
should only be entered when a kgdb break instruction is executed
from the kernel. Otherwise, if kgdb is enabled, a userspace program
can cause the kernel to drop into the debugger by executing either
KGDB_BREAKINST or KGDB_COMPILED_BREAK.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
kgdb,arm: fix register dump 2010-10-29T18:14:40+00:00 Rabin Vincent rabin@rab.in 2010-10-26T17:49:00+00:00 834b2964b7ab047610da038e42d61dc8dac6339a DBG_MAX_REG_NUM incorrectly had the number of indices in the GDB regs array rather than the number of registers, leading to an oops when the "rd" command is used in KDB. Cc: stable@kernel.org Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> 
DBG_MAX_REG_NUM incorrectly had the number of indices in the GDB regs
array rather than the number of registers, leading to an oops when the
"rd" command is used in KDB.

Cc: stable@kernel.org
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
ARM: 6326/1: kgdb: fix GDB_MAX_REGS no longer used 2010-08-14T08:28:35+00:00 eric miao eric.y.miao@gmail.com 2010-08-12T15:43:00+00:00 2f174847b0fdd4eb9f482030a284db24aef7a97f According to commit 22eeef4bb2a7fd225089c0044060ed1fbf091958 kgdb,arm: Individual register get/set for arm It's now replaced by DBG_MAX_REG_NUM. Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
According to commit 22eeef4bb2a7fd225089c0044060ed1fbf091958

    kgdb,arm: Individual register get/set for arm

It's now replaced by DBG_MAX_REG_NUM.

Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arm,kgdb: Add ability to trap into debugger on notify_die 2010-08-05T14:22:22+00:00 Jason Wessel jason.wessel@windriver.com 2010-08-05T14:22:22+00:00 62a0309c4c99274052e4829ed6a8fe579dd2c767 Now that ARM implements the notify die handlers, add the ability for the kernel debugger to receive the notifications. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> CC: Russell King <linux@arm.linux.org.uk> CC: linux-arm-kernel@lists.infradead.org 
Now that ARM implements the notify die handlers, add the ability for
the kernel debugger to receive the notifications.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: linux-arm-kernel@lists.infradead.org