commit 3c0696076aad60a2f04c019761921954579e1b0e upstream.
It is currently possible for a userspace application to enter an
infinite page fault loop when using HugeTLB pages implemented with
contiguous PTEs when HAFDBS is not available. This happens because:
1. The kernel may sometimes write PTEs that are sw-dirty but hw-clean
(PTE_DIRTY | PTE_RDONLY | PTE_WRITE).
2. If, during a write, the CPU uses a sw-dirty, hw-clean PTE in handling
the memory access on a system without HAFDBS, we will get a page
fault.
3. HugeTLB will check if it needs to update the dirty bits on the PTE.
For contiguous PTEs, it will check to see if the pgprot bits need
updating. In this case, HugeTLB wants to write a sequence of
sw-dirty, hw-dirty PTEs, but it finds that all the PTEs it is about
to overwrite are all pte_dirty() (pte_sw_dirty() => pte_dirty()),
so it thinks no update is necessary.
We can get the kernel to write a sw-dirty, hw-clean PTE with the
following steps (showing the relevant VMA flags and pgprot bits):
i. Create a valid, writable contiguous PTE.
VMA vmflags: VM_SHARED | VM_READ | VM_WRITE
VMA pgprot bits: PTE_RDONLY | PTE_WRITE
PTE pgprot bits: PTE_DIRTY | PTE_WRITE
ii. mprotect the VMA to PROT_NONE.
VMA vmflags: VM_SHARED
VMA pgprot bits: PTE_RDONLY
PTE pgprot bits: PTE_DIRTY | PTE_RDONLY
iii. mprotect the VMA back to PROT_READ | PROT_WRITE.
VMA vmflags: VM_SHARED | VM_READ | VM_WRITE
VMA pgprot bits: PTE_RDONLY | PTE_WRITE
PTE pgprot bits: PTE_DIRTY | PTE_WRITE | PTE_RDONLY
Make it impossible to create a writeable sw-dirty, hw-clean PTE with
pte_modify(). Such a PTE should be impossible to create, and there may
be places that assume that pte_dirty() implies pte_hw_dirty().
Signed-off-by: James Houghton <jthoughton@google.com>
Fixes: 031e6e6b4e12 ("arm64: hugetlb: Avoid unnecessary clearing in huge_ptep_set_access_flags")
Cc: <stable@vger.kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20231204172646.2541916-3-jthoughton@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c854188ea01062f5a5fd7f05658feb1863774eaa upstream. We currently expose the PMU version of the host to the guest via emulation of the DFR0_EL1 and AA64DFR0_EL1 debug feature registers. However many of the features offered beyond PMUv3 for 8.1 are not supported in KVM. Examples of this include support for the PMMIR registers (added in PMUv3 for ARMv8.4) and 64-bit event counters added in (PMUv3 for ARMv8.5). Let's trap the Debug Feature Registers in order to limit PMUVer/PerfMon in the Debug Feature Registers to PMUv3 for ARMv8.1 to avoid unexpected behaviour. Both ID_AA64DFR0.PMUVer and ID_DFR0.PerfMon follow the "Alternative ID scheme used for the Performance Monitors Extension version" where 0xF means an IMPLEMENTATION DEFINED PMU is implemented, and values 0x0-0xE are treated as with an unsigned field (with 0x0 meaning no PMU is present). As we don't expect to expose an IMPLEMENTATION DEFINED PMU, and our cap is below 0xF, we can treat these fields as unsigned when applying the cap. Signed-off-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> [Mark: make field names consistent, use perfmon cap] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will@kernel.org> [yuzenghui@huawei.com: adjust the context in read_id_reg()] Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e35aa642ee4dab01b16cc4b2df59d1936f3b3c2 upstream. When emulating ID registers there is often a need to cap the version bits of a feature such that the guest will not use features that the host is not aware of. For example, when KVM mediates access to the PMU by emulating register accesses. Let's add a helper that extracts a performance monitors ID field and caps the version to a given value. Fields that identify the version of the Performance Monitors Extension do not follow the standard ID scheme, and instead follow the scheme described in ARM DDI 0487E.a page D13-2825 "Alternative ID scheme used for the Performance Monitors Extension version". The value 0xF means an IMPLEMENTATION DEFINED PMU is present, and values 0x0-OxE can be treated the same as an unsigned field with 0x0 meaning no PMU is present. Signed-off-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> [Mark: rework to handle perfmon fields] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8d0f019e4c4f2ee2de81efd9bf1c27e9fb3c0460 ] Add the missing Set/Way CMOs that apply to tagged memory. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20230515204601.1270428-2-maz@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af6c0bd59f4f3ad5daad2f7b777954b1954551d5 ]
Currently only the first attempt to single-step has any effect. After
that all further stepping remains "stuck" at the same program counter
value.
Refer to the ARM Architecture Reference Manual (ARM DDI 0487E.a) D2.12,
PSTATE.SS=1 should be set at each step before transferring the PE to the
'Active-not-pending' state. The problem here is PSTATE.SS=1 is not set
since the second single-step.
After the first single-step, the PE transferes to the 'Inactive' state,
with PSTATE.SS=0 and MDSCR.SS=1, thus PSTATE.SS won't be set to 1 due to
kernel_active_single_step()=true. Then the PE transferes to the
'Active-pending' state when ERET and returns to the debugger by step
exception.
Before this patch:
==================
Entering kdb (current=0xffff3376039f0000, pid 1) on processor 0 due to Keyboard Entry
[0]kdb>
[0]kdb>
[0]kdb> bp write_sysrq_trigger
Instruction(i) BP #0 at 0xffffa45c13d09290 (write_sysrq_trigger)
is enabled addr at ffffa45c13d09290, hardtype=0 installed=0
[0]kdb> go
$ echo h > /proc/sysrq-trigger
Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to Breakpoint @ 0xffffad651a309290
[1]kdb> ss
Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to SS trap @ 0xffffad651a309294
[1]kdb> ss
Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to SS trap @ 0xffffad651a309294
[1]kdb>
After this patch:
=================
Entering kdb (current=0xffff6851c39f0000, pid 1) on processor 0 due to Keyboard Entry
[0]kdb> bp write_sysrq_trigger
Instruction(i) BP #0 at 0xffffc02d2dd09290 (write_sysrq_trigger)
is enabled addr at ffffc02d2dd09290, hardtype=0 installed=0
[0]kdb> go
$ echo h > /proc/sysrq-trigger
Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to Breakpoint @ 0xffffc02d2dd09290
[1]kdb> ss
Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd09294
[1]kdb> ss
Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd09298
[1]kdb> ss
Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd0929c
[1]kdb>
Fixes: 44679a4f142b ("arm64: KGDB: Add step debugging support")
Co-developed-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20230202073148.657746-3-sumit.garg@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 031af50045ea97ed4386eb3751ca2c134d0fc911 ]
The inline assembly for arm64's cmpxchg_double*() implementations use a
+Q constraint to hazard against other accesses to the memory location
being exchanged. However, the pointer passed to the constraint is a
pointer to unsigned long, and thus the hazard only applies to the first
8 bytes of the location.
GCC can take advantage of this, assuming that other portions of the
location are unchanged, leading to a number of potential problems.
This is similar to what we fixed back in commit:
fee960bed5e857eb ("arm64: xchg: hazard against entire exchange variable")
... but we forgot to adjust cmpxchg_double*() similarly at the same
time.
The same problem applies, as demonstrated with the following test:
| struct big {
| u64 lo, hi;
| } __aligned(128);
|
| unsigned long foo(struct big *b)
| {
| u64 hi_old, hi_new;
|
| hi_old = b->hi;
| cmpxchg_double_local(&b->lo, &b->hi, 0x12, 0x34, 0x56, 0x78);
| hi_new = b->hi;
|
| return hi_old ^ hi_new;
| }
... which GCC 12.1.0 compiles as:
| 0000000000000000 <foo>:
| 0: d503233f paciasp
| 4: aa0003e4 mov x4, x0
| 8: 1400000e b 40 <foo+0x40>
| c: d2800240 mov x0, #0x12 // #18
| 10: d2800681 mov x1, #0x34 // #52
| 14: aa0003e5 mov x5, x0
| 18: aa0103e6 mov x6, x1
| 1c: d2800ac2 mov x2, #0x56 // #86
| 20: d2800f03 mov x3, #0x78 // #120
| 24: 48207c82 casp x0, x1, x2, x3, [x4]
| 28: ca050000 eor x0, x0, x5
| 2c: ca060021 eor x1, x1, x6
| 30: aa010000 orr x0, x0, x1
| 34: d2800000 mov x0, #0x0 // #0 <--- BANG
| 38: d50323bf autiasp
| 3c: d65f03c0 ret
| 40: d2800240 mov x0, #0x12 // #18
| 44: d2800681 mov x1, #0x34 // #52
| 48: d2800ac2 mov x2, #0x56 // #86
| 4c: d2800f03 mov x3, #0x78 // #120
| 50: f9800091 prfm pstl1strm, [x4]
| 54: c87f1885 ldxp x5, x6, [x4]
| 58: ca0000a5 eor x5, x5, x0
| 5c: ca0100c6 eor x6, x6, x1
| 60: aa0600a6 orr x6, x5, x6
| 64: b5000066 cbnz x6, 70 <foo+0x70>
| 68: c8250c82 stxp w5, x2, x3, [x4]
| 6c: 35ffff45 cbnz w5, 54 <foo+0x54>
| 70: d2800000 mov x0, #0x0 // #0 <--- BANG
| 74: d50323bf autiasp
| 78: d65f03c0 ret
Notice that at the lines with "BANG" comments, GCC has assumed that the
higher 8 bytes are unchanged by the cmpxchg_double() call, and that
`hi_old ^ hi_new` can be reduced to a constant zero, for both LSE and
LL/SC versions of cmpxchg_double().
This patch fixes the issue by passing a pointer to __uint128_t into the
+Q constraint, ensuring that the compiler hazards against the entire 16
bytes being modified.
With this change, GCC 12.1.0 compiles the above test as:
| 0000000000000000 <foo>:
| 0: f9400407 ldr x7, [x0, #8]
| 4: d503233f paciasp
| 8: aa0003e4 mov x4, x0
| c: 1400000f b 48 <foo+0x48>
| 10: d2800240 mov x0, #0x12 // #18
| 14: d2800681 mov x1, #0x34 // #52
| 18: aa0003e5 mov x5, x0
| 1c: aa0103e6 mov x6, x1
| 20: d2800ac2 mov x2, #0x56 // #86
| 24: d2800f03 mov x3, #0x78 // #120
| 28: 48207c82 casp x0, x1, x2, x3, [x4]
| 2c: ca050000 eor x0, x0, x5
| 30: ca060021 eor x1, x1, x6
| 34: aa010000 orr x0, x0, x1
| 38: f9400480 ldr x0, [x4, #8]
| 3c: d50323bf autiasp
| 40: ca0000e0 eor x0, x7, x0
| 44: d65f03c0 ret
| 48: d2800240 mov x0, #0x12 // #18
| 4c: d2800681 mov x1, #0x34 // #52
| 50: d2800ac2 mov x2, #0x56 // #86
| 54: d2800f03 mov x3, #0x78 // #120
| 58: f9800091 prfm pstl1strm, [x4]
| 5c: c87f1885 ldxp x5, x6, [x4]
| 60: ca0000a5 eor x5, x5, x0
| 64: ca0100c6 eor x6, x6, x1
| 68: aa0600a6 orr x6, x5, x6
| 6c: b5000066 cbnz x6, 78 <foo+0x78>
| 70: c8250c82 stxp w5, x2, x3, [x4]
| 74: 35ffff45 cbnz w5, 5c <foo+0x5c>
| 78: f9400480 ldr x0, [x4, #8]
| 7c: d50323bf autiasp
| 80: ca0000e0 eor x0, x7, x0
| 84: d65f03c0 ret
... sampling the high 8 bytes before and after the cmpxchg, and
performing an EOR, as we'd expect.
For backporting, I've tested this atop linux-4.9.y with GCC 5.5.0. Note
that linux-4.9.y is oldest currently supported stable release, and
mandates GCC 5.1+. Unfortunately I couldn't get a GCC 5.1 binary to run
on my machines due to library incompatibilities.
I've also used a standalone test to check that we can use a __uint128_t
pointer in a +Q constraint at least as far back as GCC 4.8.5 and LLVM
3.9.1.
Fixes: 5284e1b4bc8a ("arm64: xchg: Implement cmpxchg_double")
Fixes: e9a4b795652f ("arm64: cmpxchg_dbl: patch in lse instructions when supported by the CPU")
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/lkml/Y6DEfQXymYVgL3oJ@boqun-archlinux/
Reported-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/Y6GXoO4qmH9OIZ5Q@hirez.programming.kicks-ass.net/
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230104151626.3262137-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 44b3834b2eed595af07021b1c64e6f9bc396398b upstream. Cortex-A57 and Cortex-A72 have an erratum where an interrupt that occurs between a pair of AES instructions in aarch32 mode may corrupt the ELR. The task will subsequently produce the wrong AES result. The AES instructions are part of the cryptographic extensions, which are optional. User-space software will detect the support for these instructions from the hwcaps. If the platform doesn't support these instructions a software implementation should be used. Remove the hwcap bits on affected parts to indicate user-space should not use the AES instructions. Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: James Morse <james.morse@arm.com> Link: https://lore.kernel.org/r/20220714161523.279570-3-james.morse@arm.com Signed-off-by: Will Deacon <will@kernel.org> [florian: resolved conflicts in arch/arm64/tools/cpucaps and cpu_errata.c] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e112b032a72c78f15d0c803c5dc6be444c2e6c66 upstream. Currently in arm64, FDT is mapped to RO before it's passed to early_init_dt_scan(). However, there might be some codes (eg. commit "fdt: add support for rng-seed") that need to modify FDT during init. Map FDT to RO after early fixups are done. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Will Deacon <will@kernel.org> [mkbestas: fixed trivial conflicts for 4.19 backport] Signed-off-by: Michael Bestas <mkbestas@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit de6921856f99c11d3986c6702d851e1328d4f7f6 ] Enable tracing of the execve*() system calls with the syscalls:sys_exit_execve tracepoint by removing the call to forget_syscall() when starting a new thread and preserving the value of regs->syscallno across exec. Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com> Link: https://lore.kernel.org/r/20220608162447.666494-2-flaniel@linux.microsoft.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Will reports that with CONFIG_EXPERT=y and CONFIG_HARDEN_BRANCH_PREDICTOR=n,
the kernel dereferences a NULL pointer during boot:
[ 2.384444] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 2.384461] pstate: 20400085 (nzCv daIf +PAN -UAO)
[ 2.384472] pc : cpu_hyp_reinit+0x114/0x30c
[ 2.384476] lr : cpu_hyp_reinit+0x80/0x30c
[ 2.384529] Call trace:
[ 2.384533] cpu_hyp_reinit+0x114/0x30c
[ 2.384537] _kvm_arch_hardware_enable+0x30/0x54
[ 2.384541] flush_smp_call_function_queue+0xe4/0x154
[ 2.384544] generic_smp_call_function_single_interrupt+0x10/0x18
[ 2.384549] ipi_handler+0x170/0x2b0
[ 2.384555] handle_percpu_devid_fasteoi_ipi+0x120/0x1cc
[ 2.384560] __handle_domain_irq+0x9c/0xf4
[ 2.384563] gic_handle_irq+0x6c/0xe4
[ 2.384566] el1_irq+0xf0/0x1c0
[ 2.384570] arch_cpu_idle+0x28/0x44
[ 2.384574] do_idle+0x100/0x2a8
[ 2.384577] cpu_startup_entry+0x20/0x24
[ 2.384581] secondary_start_kernel+0x1b0/0x1cc
[ 2.384589] Code: b9469d08 7100011f 540003ad 52800208 (f9400108)
[ 2.384600] ---[ end trace 266d08dbf96ff143 ]---
[ 2.385171] Kernel panic - not syncing: Fatal exception in interrupt
In this configuration arm64_get_bp_hardening_data() returns NULL.
Add a check in kvm_get_hyp_vector().
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/linux-arm-kernel/20220408120041.GB27685@willie-the-truck/
Fixes: a68912a3ae3 ("KVM: arm64: Add templates for BHB mitigation sequences")
Cc: stable@vger.kernel.org # 4.19
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>