commit a9c406e6462ff14956d690de7bbe5131a5677dc9 upstream. Adding a second set of vectors to .entry.tramp.text will make it larger than a single 4K page. Allow the trampoline text to occupy up to three pages by adding two more fixmap slots. Previous changes to tramp_valias allowed it to reach beyond a single page. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The HYP rodata section is currently lumped together with the BSS,
which isn't exactly what is expected (it gets registered with
kmemleak, for example).
Move it away so that it is actually marked RO. As an added
benefit, it isn't registered with kmemleak anymore.
Fixes: 380e18ade4a5 ("KVM: arm64: Introduce a BSS section for use at Hyp")
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org #5.13
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210802123830.2195174-2-maz@kernel.org
We will soon unmap the .hyp sections from the host stage 2 in Protected nVHE mode, which obviously works with at least page granularity, so make sure to align them correctly. Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210319100146.1149909-37-qperret@google.com
Currently, the hyp code cannot make full use of a bss, as the kernel section is mapped read-only. While this mapping could simply be changed to read-write, it would intermingle even more the hyp and kernel state than they currently are. Instead, introduce a __hyp_bss section, that uses reserved pages, and create the appropriate RW hyp mappings during KVM init. Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210319100146.1149909-8-qperret@google.com
Pull KVM updates from Paolo Bonzini:
"x86:
- Support for userspace to emulate Xen hypercalls
- Raise the maximum number of user memslots
- Scalability improvements for the new MMU.
Instead of the complex "fast page fault" logic that is used in
mmu.c, tdp_mmu.c uses an rwlock so that page faults are concurrent,
but the code that can run against page faults is limited. Right now
only page faults take the lock for reading; in the future this will
be extended to some cases of page table destruction. I hope to
switch the default MMU around 5.12-rc3 (some testing was delayed
due to Chinese New Year).
- Cleanups for MAXPHYADDR checks
- Use static calls for vendor-specific callbacks
- On AMD, use VMLOAD/VMSAVE to save and restore host state
- Stop using deprecated jump label APIs
- Workaround for AMD erratum that made nested virtualization
unreliable
- Support for LBR emulation in the guest
- Support for communicating bus lock vmexits to userspace
- Add support for SEV attestation command
- Miscellaneous cleanups
PPC:
- Support for second data watchpoint on POWER10
- Remove some complex workarounds for buggy early versions of POWER9
- Guest entry/exit fixes
ARM64:
- Make the nVHE EL2 object relocatable
- Cleanups for concurrent translation faults hitting the same page
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Simplification of the early init hypercall handling
Non-KVM changes (with acks):
- Detection of contended rwlocks (implemented only for qrwlocks,
because KVM only needs it for x86)
- Allow __DISABLE_EXPORTS from assembly code
- Provide a saner follow_pfn replacements for modules"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (192 commits)
KVM: x86/xen: Explicitly pad struct compat_vcpu_info to 64 bytes
KVM: selftests: Don't bother mapping GVA for Xen shinfo test
KVM: selftests: Fix hex vs. decimal snafu in Xen test
KVM: selftests: Fix size of memslots created by Xen tests
KVM: selftests: Ignore recently added Xen tests' build output
KVM: selftests: Add missing header file needed by xAPIC IPI tests
KVM: selftests: Add operand to vmsave/vmload/vmrun in svm.c
KVM: SVM: Make symbol 'svm_gp_erratum_intercept' static
locking/arch: Move qrwlock.h include after qspinlock.h
KVM: PPC: Book3S HV: Fix host radix SLB optimisation with hash guests
KVM: PPC: Book3S HV: Ensure radix guest has no SLB entries
KVM: PPC: Don't always report hash MMU capability for P9 < DD2.2
KVM: PPC: Book3S HV: Save and restore FSCR in the P9 path
KVM: PPC: remove unneeded semicolon
KVM: PPC: Book3S HV: Use POWER9 SLBIA IH=6 variant to clear SLB
KVM: PPC: Book3S HV: No need to clear radix host SLB before loading HPT guest
KVM: PPC: Book3S HV: Fix radix guest SLB side channel
KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support
KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWR
KVM: PPC: Book3S HV: Add infrastructure to support 2nd DAWR
...
Add TRAMP_SWAPPER_OFFSET and use that instead of hardcoding the offset between swapper_pg_dir and tramp_pg_dir. Then use TRAMP_SWAPPER_OFFSET to assert that the offset is correct at link time. Signed-off-by: Joey Gouly <joey.gouly@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20210202123658.22308-3-joey.gouly@arm.com Signed-off-by: Will Deacon <will@kernel.org>
Add RESERVED_SWAPPER_OFFSET and use that instead of hardcoding the offset between swapper_pg_dir and reserved_pg_dir. Then use RESERVED_SWAPPER_OFFSET to assert that the offset is correct at link time. Signed-off-by: Joey Gouly <joey.gouly@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20210202123658.22308-2-joey.gouly@arm.com Signed-off-by: Will Deacon <will@kernel.org>
Add a post-processing step to compilation of KVM nVHE hyp code which calls a custom host tool (gen-hyprel) on the partially linked object file (hyp sections' names prefixed). The tool lists all R_AARCH64_ABS64 data relocations targeting hyp sections and generates an assembly file that will form a new section .hyp.reloc in the kernel binary. The new section contains an array of 32-bit offsets to the positions targeted by these relocations. Since these addresses of those positions will not be determined until linking of `vmlinux`, each 32-bit entry carries a R_AARCH64_PREL32 relocation with addend <section_base_sym> + <r_offset>. The linker of `vmlinux` will therefore fill the slot accordingly. This relocation data will be used at runtime to convert the kernel VAs at those positions to hyp VAs. Signed-off-by: David Brazdil <dbrazdil@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210105180541.65031-5-dbrazdil@google.com
We will need to recognize pointers in .rodata specific to hyp, so establish a .hyp.rodata ELF section. Merge it with the existing .hyp.data..ro_after_init as they are treated the same at runtime. Signed-off-by: David Brazdil <dbrazdil@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210105180541.65031-3-dbrazdil@google.com
Pull KVM updates from Paolo Bonzini: "Much x86 work was pushed out to 5.12, but ARM more than made up for it. ARM: - PSCI relay at EL2 when "protected KVM" is enabled - New exception injection code - Simplification of AArch32 system register handling - Fix PMU accesses when no PMU is enabled - Expose CSV3 on non-Meltdown hosts - Cache hierarchy discovery fixes - PV steal-time cleanups - Allow function pointers at EL2 - Various host EL2 entry cleanups - Simplification of the EL2 vector allocation s390: - memcg accouting for s390 specific parts of kvm and gmap - selftest for diag318 - new kvm_stat for when async_pf falls back to sync x86: - Tracepoints for the new pagetable code from 5.10 - Catch VFIO and KVM irqfd events before userspace - Reporting dirty pages to userspace with a ring buffer - SEV-ES host support - Nested VMX support for wait-for-SIPI activity state - New feature flag (AVX512 FP16) - New system ioctl to report Hyper-V-compatible paravirtualization features Generic: - Selftest improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits) KVM: SVM: fix 32-bit compilation KVM: SVM: Add AP_JUMP_TABLE support in prep for AP booting KVM: SVM: Provide support to launch and run an SEV-ES guest KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests KVM: SVM: Provide support for SEV-ES vCPU loading KVM: SVM: Provide support for SEV-ES vCPU creation/loading KVM: SVM: Update ASID allocation to support SEV-ES guests KVM: SVM: Set the encryption mask for the SVM host save area KVM: SVM: Add NMI support for an SEV-ES guest KVM: SVM: Guest FPU state save/restore not needed for SEV-ES guest KVM: SVM: Do not report support for SMM for an SEV-ES guest KVM: x86: Update __get_sregs() / __set_sregs() to support SEV-ES KVM: SVM: Add support for CR8 write traps for an SEV-ES guest KVM: SVM: Add support for CR4 write traps for an SEV-ES guest KVM: SVM: Add support for CR0 write traps for an SEV-ES guest KVM: SVM: Add support for EFER write traps for an SEV-ES guest KVM: SVM: Support string IO operations for an SEV-ES guest KVM: SVM: Support MMIO for an SEV-ES guest KVM: SVM: Create trace events for VMGEXIT MSR protocol processing KVM: SVM: Create trace events for VMGEXIT processing ...