linux.git/arch/csky/kernel/setup.c, branch v6.12.80

of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify

2024-12-05T13:01:32+00:00

[ Upstream commit b2473a359763e27567993e7d8f37de82f57a0829 ]

 __pa() is only intended to be used for linear map addresses and using
it for initial_boot_params which is in fixmap for arm64 will give an
incorrect value. Hence save the physical address when it is known at
boot time when calling early_init_dt_scan for arm64 and use it at kexec
time instead of converting the virtual address using __pa().

Note that arm64 doesn't need the FDT region reserved in the DT as the
kernel explicitly reserves the passed in FDT. Therefore, only a debug
warning is fixed with this change.

Reported-by: Breno Leitao 
Suggested-by: Mark Rutland 
Signed-off-by: Usama Arif 
Fixes: ac10be5cdbfa ("arm64: Use common of_kexec_alloc_and_setup_fdt()")
Link: https://lore.kernel.org/r/20241023171426.452688-1-usamaarif642@gmail.com
Signed-off-by: Rob Herring (Arm) 
Signed-off-by: Sasha Levin

vgacon, arch/*: remove unused screen_info definitions

2023-10-17T08:17:02+00:00

A number of architectures either kept the screen_info definition for
historical purposes as it used to be required by the generic VT code, or
they copied it from another architecture in order to build the VGA console
driver in an allmodconfig build. The mips definition is used by some
platforms, but the initialization on jazz is not needed.

Now that vgacon no longer builds on these architectures, remove the
stale definitions and initializations.

Reviewed-by: Javier Martinez Canillas 
Reviewed-by: Thomas Zimmermann 
Reviewed-by: Philippe Mathieu-Daudé 
Acked-by: Dinh Nguyen 
Acked-by: Max Filippov 
Acked-by: Palmer Dabbelt 
Acked-by: Guo Ren 
Acked-by: Helge Deller 
Signed-off-by: Arnd Bergmann 
Link: https://lore.kernel.org/r/20231009211845.3136536-5-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman

csky: Correct position of _stext

2022-07-23T01:36:14+00:00

Correct position of _stext to prevent check_kernel_text_object
warning [1].

[1] https://lore.kernel.org/linux-csky/YfLpNkmlvoR8iPcq@ls3530/

Signed-off-by: Guo Ren 
Signed-off-by: Guo Ren 
Cc: Helge Deller

csky: convert to setup_initial_init_mm()

2021-07-08T18:48:21+00:00

Use setup_initial_init_mm() helper to simplify code.

Link: https://lkml.kernel.org/r/20210608083418.137226-6-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang 
Acked-by: Guo Ren 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

csky: Add memory layout 2.5G(user):1.5G(kernel)

2021-01-12T01:52:40+00:00

There are two ways for translating va to pa for csky:
 - Use TLB(Translate Lookup Buffer) and PTW (Page Table Walk)
 - Use SSEG0/1 (Simple Segment Mapping)

We use tlb mapping 0-2G and 3G-4G virtual address area and SSEG0/1
are for 2G-2.5G and 2.5G-3G translation. We could disable SSEG0
to use 2G-2.5G as TLB user mapping.

Signed-off-by: Guo Ren

dma-mapping: merge into

2020-10-06T05:07:04+00:00

Merge dma-contiguous.h into dma-map-ops.h, after removing the comment
describing the contiguous allocator into kernel/dma/contigous.c.

Signed-off-by: Christoph Hellwig

csky: simplify detection of memory zone boundaries

2020-06-04T03:09:43+00:00

The free_area_init() function only requires the definition of maximal PFN
for each of the supported zone rater than calculation of actual zone sizes
and the sizes of the holes between the zones.

After removal of CONFIG_HAVE_MEMBLOCK_NODE_MAP the free_area_init() is
available to all architectures.

Using this function instead of free_area_init_node() simplifies the zone
detection.

Signed-off-by: Mike Rapoport 
Signed-off-by: Andrew Morton 
Tested-by: Hoan Tran 	[arm64]
Cc: Baoquan He 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: "James E.J. Bottomley" 
Cc: Jonathan Corbet 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Hocko 
Cc: Michal Simek 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Tony Luck 
Cc: Vineet Gupta 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200412194859.12663-10-rppt@kernel.org
Signed-off-by: Linus Torvalds

csky: Fixup cpu speculative execution to IO area

2020-04-03T04:40:07+00:00

For the memory size ( > 512MB, < 1GB), the MSA setting is:

 - SSEG0: PHY_START        , PHY_START + 512MB
 - SSEG1: PHY_START + 512MB, PHY_START + 1GB

But the real memory is no more than 1GB, there is a gap between the
end size of memory and border of 1GB. CPU could speculatively
execute to that gap and if the gap of the bus couldn't respond to
the CPU request, then the crash will happen.

Now make the setting with:

 - SSEG0: PHY_START        , PHY_START + 512MB (no change)
 - SSEG1: Disabled (We use highmem to use the memory of 512MB~1GB)

We also deprecated zhole_szie[] settings, it's only used by arm
style CPUs. All memory gap should use Reserved setting of dts in
csky system.

Signed-off-by: Guo Ren

csky: Add setup_initrd check code

2020-02-21T07:43:25+00:00

We should give some necessary check for initrd just like other
architectures and it seems that setup_initrd() could be a common
code for all architectures.

Signed-off-by: Guo Ren

csky: Separate fixaddr_init from highmem

2020-02-21T07:43:24+00:00

After fixaddr_init is separated from highmem, we could use tcm
without highmem selected. (610 (abiv1) don't support highmem,
but it could use tcm now.)

Signed-off-by: Guo Ren