linux.git/arch/csky/kernel, branch v6.12.80

arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c

2025-11-02T13:15:22+00:00

[ Upstream commit 35561bab768977c9e05f1f1a9bc00134c85f3e28 ]

The include/generated/asm-offsets.h is generated in Kbuild during
compiling from arch/SRCARCH/kernel/asm-offsets.c. When we want to
generate another similar offset header file, circular dependency can
happen.

For example, we want to generate a offset file include/generated/test.h,
which is included in include/sched/sched.h. If we generate asm-offsets.h
first, it will fail, as include/sched/sched.h is included in asm-offsets.c
and include/generated/test.h doesn't exist; If we generate test.h first,
it can't success neither, as include/generated/asm-offsets.h is included
by it.

In x86_64, the macro COMPILE_OFFSETS is used to avoid such circular
dependency. We can generate asm-offsets.h first, and if the
COMPILE_OFFSETS is defined, we don't include the "generated/test.h".

And we define the macro COMPILE_OFFSETS for all the asm-offsets.c for this
purpose.

Signed-off-by: Menglong Dong 
Signed-off-by: Peter Zijlstra (Intel) 
Signed-off-by: Sasha Levin

of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify

2024-12-05T13:01:32+00:00

[ Upstream commit b2473a359763e27567993e7d8f37de82f57a0829 ]

 __pa() is only intended to be used for linear map addresses and using
it for initial_boot_params which is in fixmap for arm64 will give an
incorrect value. Hence save the physical address when it is known at
boot time when calling early_init_dt_scan for arm64 and use it at kexec
time instead of converting the virtual address using __pa().

Note that arm64 doesn't need the FDT region reserved in the DT as the
kernel explicitly reserves the passed in FDT. Therefore, only a debug
warning is fixed with this change.

Reported-by: Breno Leitao 
Suggested-by: Mark Rutland 
Signed-off-by: Usama Arif 
Fixes: ac10be5cdbfa ("arm64: Use common of_kexec_alloc_and_setup_fdt()")
Link: https://lore.kernel.org/r/20241023171426.452688-1-usamaarif642@gmail.com
Signed-off-by: Rob Herring (Arm) 
Signed-off-by: Sasha Levin

mm: remove legacy install_special_mapping() code

2024-09-02T03:26:13+00:00

All relevant architectures had already been converted to the new interface
(which just has an underscore in front of the name - not very imaginative
naming), this just force-converts the stragglers.

The modern interface is almost identical to the old one, except instead of
the page pointer it takes a "struct vm_special_mapping" that describes the
mapping (and contains the page pointer as one member), and it returns the
resulting 'vma' instead of just the error code.

Getting rid of the old interface also gets rid of some special casing,
which had caused problems with the mremap extensions to "struct
vm_special_mapping".

[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/CAHk-=whvR+z=0=0gzgdfUiK70JTa-=+9vxD-4T=3BagXR6dciA@mail.gmail.comTested-by: Rob Landley  # arch/sh/
Link: https://lore.kernel.org/all/20240819195120.GA1113263@thelio-3990X/
Signed-off-by: Linus Torvalds 
Cc: Nathan Chancellor 
Cc: Michael Ellerman 
Cc: Anton Ivanov 
Cc: Brian Cain 
Cc: Christophe Leroy 
Cc: Dinh Nguyen 
Cc: Guo Ren 
Cc: Jeff Xu 
Cc: Johannes Berg 
Cc: John Paul Adrian Glaubitz 
Cc: Liam R. Howlett 
Cc: Nicholas Piggin 
Cc: Pedro Falcato 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Rob Landley 
Cc: Yoshinori Sato 
Signed-off-by: Andrew Morton

csky: convert to generic syscall table

2024-07-10T12:23:38+00:00

The uapi/asm/unistd_32.h and asm/syscall_table_32.h headers can now be
generated from scripts/syscall.tbl, which makes this consistent with
the other architectures that have their own syscall.tbl.

csky has two architecture specific system calls, which I add to
the generic table.  The time32, stat64 and rlimit entries in the
syscall_abis_32 line are for system calls that were part of the generic
ABI when arch/csky got added but are no longer enabled by default for
new architectures.

Both the user visible side of asm/unistd.h and the internal syscall
table in the kernel should have the same effective contents after this.

Signed-off-by: Arnd Bergmann

syscalls: mmap(): use unsigned offset type consistently

2024-06-25T13:57:38+00:00

Most architectures that implement the old-style mmap() with byte offset
use 'unsigned long' as the type for that offset, but microblaze and
riscv have the off_t type that is shared with userspace, matching the
prototype in include/asm-generic/syscalls.h.

Make this consistent by using an unsigned argument everywhere. This
changes the behavior slightly, as the argument is shifted to a page
number, and an user input with the top bit set would result in a
negative page offset rather than a large one as we use elsewhere.

For riscv, the 32-bit sys_mmap2() definition actually used a custom
type that is different from the global declaration, but this was
missed due to an incorrect type check.

Signed-off-by: Arnd Bergmann

Merge tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2024-05-18T19:39:20+00:00

Pull Kbuild updates from Masahiro Yamada:

 - Avoid 'constexpr', which is a keyword in C23

 - Allow 'dtbs_check' and 'dt_compatible_check' run independently of
   'dt_binding_check'

 - Fix weak references to avoid GOT entries in position-independent code
   generation

 - Convert the last use of 'optional' property in arch/sh/Kconfig

 - Remove support for the 'optional' property in Kconfig

 - Remove support for Clang's ThinLTO caching, which does not work with
   the .incbin directive

 - Change the semantics of $(src) so it always points to the source
   directory, which fixes Makefile inconsistencies between upstream and
   downstream

 - Fix 'make tar-pkg' for RISC-V to produce a consistent package

 - Provide reasonable default coverage for objtool, sanitizers, and
   profilers

 - Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.

 - Remove the last use of tristate choice in drivers/rapidio/Kconfig

 - Various cleanups and fixes in Kconfig

* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
  kconfig: use sym_get_choice_menu() in sym_check_prop()
  rapidio: remove choice for enumeration
  kconfig: lxdialog: remove initialization with A_NORMAL
  kconfig: m/nconf: merge two item_add_str() calls
  kconfig: m/nconf: remove dead code to display value of bool choice
  kconfig: m/nconf: remove dead code to display children of choice members
  kconfig: gconf: show checkbox for choice correctly
  kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
  Makefile: remove redundant tool coverage variables
  kbuild: provide reasonable defaults for tool coverage
  modules: Drop the .export_symbol section from the final modules
  kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
  kconfig: use sym_get_choice_menu() in conf_write_defconfig()
  kconfig: add sym_get_choice_menu() helper
  kconfig: turn defaults and additional prompt for choice members into error
  kconfig: turn missing prompt for choice members into error
  kconfig: turn conf_choice() into void function
  kconfig: use linked list in sym_set_changed()
  kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
  kconfig: gconf: remove debug code
  ...

kprobe/ftrace: bail out if ftrace was killed

2024-05-15T22:23:30+00:00

If an error happens in ftrace, ftrace_kill() will prevent disarming
kprobes. Eventually, the ftrace_ops associated with the kprobes will be
freed, yet the kprobes will still be active, and when triggered, they
will use the freed memory, likely resulting in a page fault and panic.

This behavior can be reproduced quite easily, by creating a kprobe and
then triggering a ftrace_kill(). For simplicity, we can simulate an
ftrace error with a kernel module like [1]:

[1]: https://github.com/brenns10/kernel_stuff/tree/master/ftrace_killer

  sudo perf probe --add commit_creds
  sudo perf trace -e probe:commit_creds
  # In another terminal
  make
  sudo insmod ftrace_killer.ko  # calls ftrace_kill(), simulating bug
  # Back to perf terminal
  # ctrl-c
  sudo perf probe --del commit_creds

After a short period, a page fault and panic would occur as the kprobe
continues to execute and uses the freed ftrace_ops. While ftrace_kill()
is supposed to be used only in extreme circumstances, it is invoked in
FTRACE_WARN_ON() and so there are many places where an unexpected bug
could be triggered, yet the system may continue operating, possibly
without the administrator noticing. If ftrace_kill() does not panic the
system, then we should do everything we can to continue operating,
rather than leave a ticking time bomb.

Link: https://lore.kernel.org/all/20240501162956.229427-1-stephen.s.brennan@oracle.com/

Signed-off-by: Stephen Brennan 
Acked-by: Masami Hiramatsu (Google) 
Acked-by: Guo Ren 
Reviewed-by: Steven Rostedt (Google) 
Signed-off-by: Masami Hiramatsu (Google)

Makefile: remove redundant tool coverage variables

2024-05-14T14:35:48+00:00

Now Kbuild provides reasonable defaults for objtool, sanitizers, and
profilers.

Remove redundant variables.

Note:

This commit changes the coverage for some objects:

  - include arch/mips/vdso/vdso-image.o into UBSAN, GCOV, KCOV
  - include arch/sparc/vdso/vdso-image-*.o into UBSAN
  - include arch/sparc/vdso/vma.o into UBSAN
  - include arch/x86/entry/vdso/extable.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
  - include arch/x86/entry/vdso/vdso-image-*.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
  - include arch/x86/entry/vdso/vdso32-setup.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
  - include arch/x86/entry/vdso/vma.o into GCOV, KCOV
  - include arch/x86/um/vdso/vma.o into KASAN, GCOV, KCOV

I believe these are positive effects because all of them are kernel
space objects.

Signed-off-by: Masahiro Yamada 
Reviewed-by: Kees Cook 
Tested-by: Roberto Sassu

kbuild: use $(src) instead of $(srctree)/$(src) for source directory

2024-05-09T19:34:52+00:00

Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:

    src := $(obj)

When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.

This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.

To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.

Going forward, the variables used in Makefiles will have the following
meanings:

  $(obj)     - directory in the object tree
  $(src)     - directory in the source tree  (changed by this commit)
  $(objtree) - the top of the kernel object tree
  $(srctree) - the top of the kernel source tree

Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).

Signed-off-by: Masahiro Yamada 
Reviewed-by: Nicolas Schier

arch: use $(obj)/ instead of $(src)/ for preprocessed linker scripts

2024-05-02T11:14:16+00:00

These are generated files. Prefix them with $(obj)/ instead of $(src)/.

Signed-off-by: Masahiro Yamada 
Acked-by: Helge Deller 
Reviewed-by: Nicolas Schier