linux.git/arch/hexagon/include, branch v4.4.117

hexagon: fix strncpy_from_user() error return

2016-09-24T08:07:44+00:00

commit f35c1e0671728d1c9abc405d05ef548b5fcb2fc4 upstream.

It's -EFAULT, not -1 (and contrary to the comment in there,
__strnlen_user() can return 0 - on faults).

Acked-by: Richard Kuo 
Signed-off-by: Al Viro 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'v4.3-rc4' into locking/core, to pick up fixes before applying new changes

2015-10-06T15:10:28+00:00

Signed-off-by: Ingo Molnar

Merge branch 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile

2015-10-04T15:31:13+00:00

Pull strscpy string copy function implementation from Chris Metcalf.

Chris sent this during the merge window, but I waffled back and forth on
the pull request, which is why it's going in only now.

The new "strscpy()" function is definitely easier to use and more secure
than either strncpy() or strlcpy(), both of which are horrible nasty
interfaces that have serious and irredeemable problems.

strncpy() has a useless return value, and doesn't NUL-terminate an
overlong result.  To make matters worse, it pads a short result with
zeroes, which is a performance disaster if you have big buffers.

strlcpy(), by contrast, is a mis-designed "fix" for strlcpy(), lacking
the insane NUL padding, but having a differently broken return value
which returns the original length of the source string.  Which means
that it will read characters past the count from the source buffer, and
you have to trust the source to be properly terminated.  It also makes
error handling fragile, since the test for overflow is unnecessarily
subtle.

strscpy() avoids both these problems, guaranteeing the NUL termination
(but not excessive padding) if the destination size wasn't zero, and
making the overflow condition very obvious by returning -E2BIG.  It also
doesn't read past the size of the source, and can thus be used for
untrusted source data too.

So why did I waffle about this for so long?

Every time we introduce a new-and-improved interface, people start doing
these interminable series of trivial conversion patches.

And every time that happens, somebody does some silly mistake, and the
conversion patch to the improved interface actually makes things worse.
Because the patch is mindnumbing and trivial, nobody has the attention
span to look at it carefully, and it's usually done over large swatches
of source code which means that not every conversion gets tested.

So I'm pulling the strscpy() support because it *is* a better interface.
But I will refuse to pull mindless conversion patches.  Use this in
places where it makes sense, but don't do trivial patches to fix things
that aren't actually known to be broken.

* 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: use global strscpy() rather than private copy
  string: provide strscpy()
  Make asm/word-at-a-time.h available on all architectures

atomic, arch: Audit atomic_{read,set}()

2015-09-23T07:54:28+00:00

This patch makes sure that atomic_{read,set}() are at least
{READ,WRITE}_ONCE().

We already had the 'requirement' that atomic_read() should use
ACCESS_ONCE(), and most archs had this, but a few were lacking.
All are now converted to use READ_ONCE().

And, by a symmetry and general paranoia argument, upgrade atomic_set()
to use WRITE_ONCE().

Signed-off-by: Peter Zijlstra (Intel) 
Cc: Andrew Morton 
Cc: Dmitry Vyukov 
Cc: Linus Torvalds 
Cc: Paul E. McKenney 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: james.hogan@imgtec.com
Cc: linux-kernel@vger.kernel.org
Cc: oleg@redhat.com
Cc: will.deacon@arm.com
Signed-off-by: Ingo Molnar

Merge branch 'akpm' (patches from Andrew)

2015-09-11T01:19:42+00:00

Merge third patch-bomb from Andrew Morton:

 - even more of the rest of MM

 - lib/ updates

 - checkpatch updates

 - small changes to a few scruffy filesystems

 - kmod fixes/cleanups

 - kexec updates

 - a dma-mapping cleanup series from hch

* emailed patches from Andrew Morton : (81 commits)
  dma-mapping: consolidate dma_set_mask
  dma-mapping: consolidate dma_supported
  dma-mapping: cosolidate dma_mapping_error
  dma-mapping: consolidate dma_{alloc,free}_noncoherent
  dma-mapping: consolidate dma_{alloc,free}_{attrs,coherent}
  mm: use vma_is_anonymous() in create_huge_pmd() and wp_huge_pmd()
  mm: make sure all file VMAs have ->vm_ops set
  mm, mpx: add "vm_flags_t vm_flags" arg to do_mmap_pgoff()
  mm: mark most vm_operations_struct const
  namei: fix warning while make xmldocs caused by namei.c
  ipc: convert invalid scenarios to use WARN_ON
  zlib_deflate/deftree: remove bi_reverse()
  lib/decompress_unlzma: Do a NULL check for pointer
  lib/decompressors: use real out buf size for gunzip with kernel
  fs/affs: make root lookup from blkdev logical size
  sysctl: fix int -> unsigned long assignments in INT_MIN case
  kexec: export KERNEL_IMAGE_SIZE to vmcoreinfo
  kexec: align crash_notes allocation to make it be inside one physical page
  kexec: remove unnecessary test in kimage_alloc_crash_control_pages()
  kexec: split kexec_load syscall from kexec core code
  ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel

2015-09-10T23:19:07+00:00

Pull hexagon updates from Richard Kuo:
 "Just two fixes -- one for a uapi header and one for a timer interface"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel:
  Revert "Hexagon: fix signal.c compile error"
  hexagon/time: Migrate to new 'set-state' interface

dma-mapping: consolidate dma_set_mask

2015-09-10T20:29:01+00:00

Almost everyone implements dma_set_mask the same way, although some time
that's hidden in ->set_dma_mask methods.

This patch consolidates those into a common implementation that either
calls ->set_dma_mask if present or otherwise uses the default
implementation.  Some architectures used to only call ->set_dma_mask
after the initial checks, and those instance have been fixed to do the
full work.  h8300 implemented dma_set_mask bogusly as a no-ops and has
been fixed.

Unfortunately some architectures overload unrelated semantics like changing
the dma_ops into it so we still need to allow for an architecture override
for now.

[jcmvbkbc@gmail.com: fix xtensa]
Signed-off-by: Christoph Hellwig 
Cc: Arnd Bergmann 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Cc: Michal Simek 
Cc: Jonas Bonn 
Cc: Chris Metcalf 
Cc: Guan Xuetao 
Cc: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Andy Shevchenko 
Signed-off-by: Max Filippov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

dma-mapping: consolidate dma_supported

2015-09-10T20:29:01+00:00

Most architectures just call into ->dma_supported, but some also return 1
if the method is not present, or 0 if no dma ops are present (although
that should never happeb). Consolidate this more broad version into
common code.

Also fix h8300 which inorrectly always returned 0, which would have been
a problem if it's dma_set_mask implementation wasn't a similarly buggy
noop.

As a few architectures have much more elaborate implementations, we
still allow for arch overrides.

[jcmvbkbc@gmail.com: fix xtensa]
Signed-off-by: Christoph Hellwig 
Cc: Arnd Bergmann 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Cc: Michal Simek 
Cc: Jonas Bonn 
Cc: Chris Metcalf 
Cc: Guan Xuetao 
Cc: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Andy Shevchenko 
Signed-off-by: Max Filippov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

dma-mapping: cosolidate dma_mapping_error

2015-09-10T20:29:01+00:00

Currently there are three valid implementations of dma_mapping_error:

 (1) call ->mapping_error
 (2) check for a hardcoded error code
 (3) always return 0

This patch provides a common implementation that calls ->mapping_error
if present, then checks for DMA_ERROR_CODE if defined or otherwise
returns 0.

[jcmvbkbc@gmail.com: fix xtensa]
Signed-off-by: Christoph Hellwig 
Cc: Arnd Bergmann 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Cc: Michal Simek 
Cc: Jonas Bonn 
Cc: Chris Metcalf 
Cc: Guan Xuetao 
Cc: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Andy Shevchenko 
Signed-off-by: Max Filippov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

dma-mapping: consolidate dma_{alloc,free}_noncoherent

2015-09-10T20:29:01+00:00

Most architectures do not support non-coherent allocations and either
define dma_{alloc,free}_noncoherent to their coherent versions or stub
them out.

Openrisc uses dma_{alloc,free}_attrs to implement them, and only Mips
implements them directly.

This patch moves the Openrisc version to common code, and handles the
DMA_ATTR_NON_CONSISTENT case in the mips dma_map_ops instance.

Note that actual non-coherent allocations require a dma_cache_sync
implementation, so if non-coherent allocations didn't work on
an architecture before this patch they still won't work after it.

[jcmvbkbc@gmail.com: fix xtensa]
Signed-off-by: Christoph Hellwig 
Cc: Arnd Bergmann 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Cc: Michal Simek 
Cc: Jonas Bonn 
Cc: Chris Metcalf 
Cc: Guan Xuetao 
Cc: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Andy Shevchenko 
Signed-off-by: Max Filippov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds