-Zdirect-access-external-data is a new Rust compiler option added in
Rust 1.78, which we use to optimize the access of external data in the
Linux kernel's Rust code. This patch modifies the Rust code in vmlinux
to directly access externa data, using PC-REL instead of GOT. However,
Rust code whithin modules is constrained by the PC-REL addressing range
and is explicitly set to use an indirect method.

Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Pull more non-mm updates from Andrew Morton:

 - A series ("kbuild: enable more warnings by default") from Arnd
   Bergmann which enables a number of additional build-time warnings. We
   fixed all the fallout which we could find, there may still be a few
   stragglers.

 - Samuel Holland has developed the series "Unified cross-architecture
   kernel-mode FPU API". This does a lot of consolidation of
   per-architecture kernel-mode FPU usage and enables the use of newer
   AMD GPUs on RISC-V.

 - Tao Su has fixed some selftests build warnings in the series
   "Selftests: Fix compilation warnings due to missing _GNU_SOURCE
   definition".

 - This pull also includes a nilfs2 fixup from Ryusuke Konishi.

* tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
  nilfs2: make block erasure safe in nilfs_finish_roll_forward()
  selftests/harness: use 1024 in place of LINE_MAX
  Revert "selftests/harness: remove use of LINE_MAX"
  selftests/fpu: allow building on other architectures
  selftests/fpu: move FP code to a separate translation unit
  drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT
  drm/amd/display: only use hard-float, not altivec on powerpc
  riscv: add support for kernel-mode FPU
  x86: implement ARCH_HAS_KERNEL_FPU_SUPPORT
  powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT
  LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT
  lib/raid6: use CC_FLAGS_FPU for NEON CFLAGS
  arm64: crypto: use CC_FLAGS_FPU for NEON CFLAGS
  arm64: implement ARCH_HAS_KERNEL_FPU_SUPPORT
  ARM: crypto: use CC_FLAGS_FPU for NEON CFLAGS
  ARM: implement ARCH_HAS_KERNEL_FPU_SUPPORT
  arch: add ARCH_HAS_KERNEL_FPU_SUPPORT
  x86/fpu: fix asm/fpu/types.h include guard
  kbuild: enable -Wcast-function-type-strict unconditionally
  kbuild: enable -Wformat-truncation on clang
  ...

LoongArch already provides kernel_fpu_begin() and kernel_fpu_end() in
asm/fpu.h, so it only needs to add kernel_fpu_available() and export the
CFLAGS adjustments.

Link: https://lkml.kernel.org/r/20240329072441.591471-8-samuel.holland@sifive.com
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com> 
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This commit switches to use the LoongArch's built-in rustc target
'loongarch64-unknown-none-softfloat'. The Rust samples have been tested.

Acked-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Pull LoongArch updates from Huacai Chen:

 - Add objtool support for LoongArch

 - Add ORC stack unwinder support for LoongArch

 - Add kernel livepatching support for LoongArch

 - Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig

 - Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig

 - Some bug fixes and other small changes

* tag 'loongarch-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch/crypto: Clean up useless assignment operations
  LoongArch: Define the __io_aw() hook as mmiowb()
  LoongArch: Remove superfluous flush_dcache_page() definition
  LoongArch: Move {dmw,tlb}_virt_to_page() definition to page.h
  LoongArch: Change __my_cpu_offset definition to avoid mis-optimization
  LoongArch: Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig
  LoongArch: Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig
  LoongArch: Add kernel livepatching support
  LoongArch: Add ORC stack unwinder support
  objtool: Check local label in read_unwind_hints()
  objtool: Check local label in add_dead_ends()
  objtool/LoongArch: Enable orc to be built
  objtool/x86: Separate arch-specific and generic parts
  objtool/LoongArch: Implement instruction decoder
  objtool/LoongArch: Enable objtool to be built

The kernel CONFIG_UNWINDER_ORC option enables the ORC unwinder, which is
similar in concept to a DWARF unwinder. The difference is that the format
of the ORC data is much simpler than DWARF, which in turn allows the ORC
unwinder to be much simpler and faster.

The ORC data consists of unwind tables which are generated by objtool.
After analyzing all the code paths of a .o file, it determines information
about the stack state at each instruction address in the file and outputs
that information to the .orc_unwind and .orc_unwind_ip sections.

The per-object ORC sections are combined at link time and are sorted and
post-processed at boot time. The unwinder uses the resulting data to
correlate instruction addresses with their stack states at run time.

Most of the logic are similar with x86, in order to get ra info before ra
is saved into stack, add ra_reg and ra_offset into orc_entry. At the same
time, modify some arch-specific code to silence the objtool warnings.

Co-developed-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Eventually we want all architectures to be using the target as defined
by rustc. However currently some architectures can't do that and are
using the target.json specification. This puts in place the foundation
to allow the use of the builtin target definition or a target.json
specification.

Signed-off-by: Jamie Cunliffe <Jamie.Cunliffe@arm.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231020155056.3495121-2-Jamie.Cunliffe@arm.com
[catalin.marinas@arm.com: squashed loongarch ifneq fix from WANG Rui]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

During the upstream progress of those DT-based drivers, DT properties
are changed a lot so very different from those in existing bootloaders.
It is inevitably that some existing systems do not provide a standard,
canonical device tree to the kernel at boot time. So let's provide a
device tree table in the kernel, keyed by the dts filename, containing
the relevant DTBs.

We can use the built-in dts files as references. Each SoC has only one
built-in dts file which describes all possible device information of
that SoC, so the dts files are good examples during development.

And as a reference, our built-in dts file only enables the most basic
bootable combinations (so it is generic enough), acts as an alternative
in case the dts in the bootloader is unexpected.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Enable initial Rust support for LoongArch.

Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

For the following assembly code:

     .text
     .global func
 func:
     nop

     .data
 var:
     .dword func

When linked with `-pie`, GNU LD populates the `var` variable with the
pre-relocated value of `func`. However, LLVM LLD does not exhibit the
same behavior. This issue also arises with the `kernel_entry` in arch/
loongarch/kernel/head.S:

 _head:
     .word   MZ_MAGIC                /* "MZ", MS-DOS header */
     .org    0x8
     .dword  kernel_entry            /* Kernel entry point */

The correct kernel entry from the MS-DOS header is crucial for jumping
to vmlinux from zboot. This necessity is why the compressed relocatable
kernel compiled by Clang encounters difficulties in booting.

To address this problem, it is proposed to apply dynamic relocations to
place with `--apply-dynamic-relocs`.

Link: https://github.com/ClangBuiltLinux/linux/issues/1962
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>