linux.git/arch/mips/ar7, branch v5.4.168

Merge tag 'mips_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2019-07-17T16:42:03+00:00

Pull MIPS updates from Paul Burton:
 "A light batch this time around but significant improvements for
  certain systems:

   - Removal of readq & writeq for MIPS32 kernels where they would
     simply BUG() anyway, allowing drivers or other code that #ifdefs on
     their presence to work properly.

   - Improvements for Ingenic JZ4740 systems, including support for the
     external memory controller & pinmuxing fixes for qi_lb60/NanoNote
     systems.

   - Improvements for Lantiq systems, in particular around SMP & IPIs.

   - DT updates for ralink/MediaTek MT7628a systems to probe & configure
     a bunch more devices.

   - Miscellaneous cleanups & build fixes"

* tag 'mips_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits)
  MIPS: fix some more fall through errors in arch/mips
  MIPS: perf events: handle switch statement falling through warnings
  mips/kprobes: Export kprobe_fault_handler()
  MAINTAINERS: Add myself as Ingenic SoCs maintainer
  MIPS: ralink: mt7628a.dtsi: Add watchdog controller DT node
  MIPS: ralink: mt7628a.dtsi: Add SPI controller DT node
  MIPS: ralink: mt7628a.dtsi: Add GPIO controller DT node
  MIPS: ralink: mt7628a.dtsi: Add pinctrl DT properties to the UART nodes
  MIPS: ralink: mt7628a.dtsi: Add pinmux DT node
  MIPS: ralink: mt7628a.dtsi: Add SPDX GPL-2.0 license identifier
  MIPS: lantiq: Add SMP support for lantiq interrupt controller
  MIPS: lantiq: Shorten register names, remove unused macros
  MIPS: lantiq: Fix bitfield masking
  MIPS: lantiq: Remove unused macros
  MIPS: lantiq: Fix attributes of of_device_id structure
  MIPS: lantiq: Change variables to the same type as the source
  MIPS: lantiq: Move macro directly to iomem function
  mips: Remove q-accessors from non-64bit platforms
  FDDI: defza: Include linux/io-64-nonatomic-lo-hi.h
  MIPS: configs: Remove useless UEVENT_HELPER_PATH
  ...

MIPS: fix some more fall through errors in arch/mips

2019-07-16T11:40:16+00:00

Fix these errors:

 arch/mips/cavium-octeon/executive/cvmx-pko.c:489:7: error: this statement may fall through [-Werror=implicit-fallthrough=]
 arch/mips/bcm63xx/dev-flash.c:89:3: error: this statement may fall through [-Werror=implicit-fallthrough=]
 arch/mips/ath79/setup.c:155:17: error: this statement may fall through [-Werror=implicit-fallthrough=]
 arch/mips/ar7/setup.c:50:3: error: this statement may fall through [-Werror=implicit-fallthrough=]

Cc: Florian Fainelli 
Cc: Thomas Gleixner 
Cc: John Crispin 
Cc: Matthias Schiffer 
Cc: "Petr Štetiar" 
Signed-off-by: Stephen Rothwell 
Signed-off-by: Paul Burton

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 182

2019-05-30T18:29:20+00:00

Based on 1 normalized pattern(s):

  this program is free software you can distribute it and or modify it
  under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope it will be useful but without any warranty
  without even the implied warranty of merchantability or fitness for
  a particular purpose see the gnu general public license for more
  details you should have received a copy of the gnu general public
  license along with this program if not write to the free software
  foundation inc 59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 32 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Richard Fontana 
Reviewed-by: Steve Winslow 
Reviewed-by: Alexios Zavras 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170026.531157061@linutronix.de
Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102

2019-05-24T15:39:00+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  51 franklin st fifth floor boston ma 02110 1301 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 50 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Kate Stewart 
Reviewed-by: Allison Randal 
Reviewed-by: Richard Fontana 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091649.499889647@linutronix.de
Signed-off-by: Greg Kroah-Hartman

net: phy: fixed-phy: Drop GPIO from fixed_phy_add()

2019-02-05T02:33:36+00:00

All users of the fixed_phy_add() pass -1 as GPIO number
to the fixed phy driver, and all users of fixed_phy_register()
pass -1 as GPIO number as well, except for the device
tree MDIO bus.

Any new users should create a proper device and pass the
GPIO as a descriptor associated with the device so delete
the GPIO argument from the calls and drop the code looking
requesting a GPIO in fixed_phy_add().

In fixed phy_register(), investigate the "fixed-link"
node and pick the GPIO descriptor from "link-gpios" if
this property exists. Move the corresponding code out
of of_mdio.c as the fixed phy code anyways requires
OF to be in use.

Tested-by: Andrew Lunn 
Signed-off-by: Linus Walleij 
Signed-off-by: David S. Miller

mm: remove include/linux/bootmem.h

2018-10-31T15:54:16+00:00

Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.

The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include 

@@
@@
- #include 
+ #include 

[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
  Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
  Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
  Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport 
Signed-off-by: Stephen Rothwell 
Acked-by: Michal Hocko 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Kroah-Hartman 
Cc: Guan Xuetao 
Cc: Ingo Molnar 
Cc: "James E.J. Bottomley" 
Cc: Jonas Bonn 
Cc: Jonathan Corbet 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Martin Schwidefsky 
Cc: Matt Turner 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Palmer Dabbelt 
Cc: Paul Burton 
Cc: Richard Kuo 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Serge Semin 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vineet Gupta 
Cc: Yoshinori Sato 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mips: unify prom_putchar() declarations

2018-07-17T16:40:17+00:00

prom_putchar() is used centrally in early printk infrastructure therefore
at least MIPS should agree on the function return type.

[paul.burton@mips.com:
  - Include linux/types.h in asm/setup.h to gain the bool typedef before
    we start include asm/setup.h elsewhere.
  - Include asm/setup.h in all files that use or define prom_putchar().
  - Also standardise on signed rather than unsigned char argument.]

Signed-off-by: Alexander Sverdlin 
Signed-off-by: Paul Burton 
Patchwork: https://patchwork.linux-mips.org/patch/19842/
Cc: linux-mips@linux-mips.org
Cc: Ralf Baechle 
Cc: James Hogan 
Cc: Jonas Gorski 
Cc: Florian Fainelli 
Cc: Kate Stewart 
Cc: Philippe Ombredanne

MIPS: AR7: Normalize clk API

2018-06-28T21:28:59+00:00

Coldfire still provides its own variant of the clk API rather than using
the generic COMMON_CLK API.  This generally works, but it causes some
link errors with drivers using the clk_round_rate(), clk_set_rate(),
clk_set_parent(), or clk_get_parent() functions when a platform lacks
those interfaces.

This adds empty stub implementations for each of them, and I don't even
try to do something useful here but instead just print a WARN() message
to make it obvious what is going on if they ever end up being called.

The drivers that call these won't be used on these platforms (otherwise
we'd get a link error today), so the added code is harmless bloat and
will warn about accidental use.

Based on commit bd7fefe1f06ca6cc ("ARM: w90x900: normalize clk API").

Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Paul Burton 
Patchwork: https://patchwork.linux-mips.org/patch/19503/
Cc: Arnd Bergmann 
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

MIPS: AR7: Constify gpio_led

2018-02-19T10:55:36+00:00

gpio_leds are not supposed to change at runtime. struct
gpio_led_platform_data contains a const struct gpio_led pointer since
v2.6.39, so mark the gpio_led structures const too.

Signed-off-by: Arvind Yadav 
Cc: Ralf Baechle 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18007/
[jhogan@kernel.org: improve commit message]
Signed-off-by: James Hogan

MIPS: AR7: ensure the port type's FCR value is used

2018-01-10T10:34:56+00:00

Since commit aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt
trigger I/F of FIFO buffers"), the port's default FCR value isn't used
in serial8250_do_set_termios anymore, but copied over once in
serial8250_config_port and then modified as needed.

Unfortunately, serial8250_config_port will never be called if the port
is shared between kernel and userspace, and the port's flag doesn't have
UPF_BOOT_AUTOCONF, which would trigger a serial8250_config_port as well.

This causes garbled output from userspace:

[    5.220000] random: procd urandom read with 49 bits of entropy available
ers
   [kee

Fix this by forcing it to be configured on boot, resulting in the
expected output:

[    5.250000] random: procd urandom read with 50 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level

Fixes: aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers")
Signed-off-by: Jonas Gorski 
Cc: Greg Kroah-Hartman 
Cc: Yoshihiro YUNOMAE 
Cc: Florian Fainelli 
Cc: Nicolas Schichan 
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17544/
Signed-off-by: Ralf Baechle