linux.git/arch/mips/boot/dts, branch v4.9.209

MIPS: dts: ar9331: fix interrupt-controller size

2019-10-29T08:15:01+00:00

[ Upstream commit 0889d07f3e4b171c453b2aaf2b257f9074cdf624 ]

It is two registers each of 4 byte.

Signed-off-by: Oleksij Rempel 
Signed-off-by: Paul Burton 
Cc: Rob Herring 
Cc: Mark Rutland 
Cc: Pengutronix Kernel Team 
Cc: Ralf Baechle 
Cc: James Hogan 
Cc: devicetree@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin

MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry

2017-11-30T08:39:03+00:00

commit 3cad14d56adbf7d621fc5a35db42f3acc0a2d6e8 upstream.

arch/mips/boot/dts/brcm/bcm96358nb4ser.dts does not exist, so
we cannot build bcm96358nb4ser.dtb .

Signed-off-by: Masahiro Yamada 
Fixes: 695835511f96 ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom")
Acked-by: James Hogan 
Signed-off-by: Rob Herring 
Signed-off-by: Greg Kroah-Hartman

MIPS: Malta: Fixup reboot

2016-11-03T23:27:27+00:00

Commit 10b6ea0959de ("MIPS: Malta: Use syscon-reboot driver to reboot")
converted the Malta board to use the generic syscon-reboot driver to
handle reboots, but incorrectly used the value 0x4d rather than 0x42 as
the magic to write to the reboot register.

I also incorrectly believed that syscon/regmap would default to native
endianness, but this isn't the case. Force this by specifying with a
native-endian property in the devicetree.

Signed-off-by: Paul Burton 
Fixes: 10b6ea0959de ("MIPS: Malta: Use syscon-reboot driver to reboot")
Reported-by: Guenter Roeck 
Cc: linux-mips@linux-mips.org
Tested-by: Guenter Roeck 
Tested-by: Maciej W. Rozycki 
Patchwork: https://patchwork.linux-mips.org/patch/14396/
Signed-off-by: Ralf Baechle

MIPS: generic: Convert SEAD-3 to a generic board

2016-10-06T16:04:20+00:00

Convert the MIPS SEAD-3 board support to be a generic board, supported
by generic kernels.

Because the SEAD-3 boot protocol was defined long ago and we don't want
to force a switch to the UHI protocol, SEAD-3 is added as a legacy board
which is detected by reading the REVISION register. This may technically
not be a valid memory read & future work will include attempting to
handle that gracefully. In practice since SEAD-3 is the only legacy
board supported by the generic kernel so far the read will only happen
on SEAD-3 boards, and even once Malta is converted the same REVISION
register exists there too. Other boards such as Boston, Ci20 & Ci40 will
use the UHI boot protocol & thus not run any of the legacy board detect
functions.

Signed-off-by: Paul Burton 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14354/
Signed-off-by: Ralf Baechle

MIPS: BMIPS: Use interrupt-controller node name

2016-10-06T15:31:02+00:00

Changes node names of the interrupt-controller device nodes to
interrupt-controller instead of label strings.

Signed-off-by: Jaedon Shin 
Cc: Florian Fainelli 
Cc: Jonas Gorski 
Cc: Kevin Cernekee 
Cc: Rob Herring 
Cc: MIPS Mailing List 
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14004/
Signed-off-by: Ralf Baechle

MIPS: BMIPS: Add support NAND device nodes

2016-10-06T15:31:02+00:00

Adds NAND device nodes to BCM7xxx MIPS based SoCs.

Signed-off-by: Jaedon Shin 
Cc: Florian Fainelli 
Cc: Jonas Gorski 
Cc: Kevin Cernekee 
Cc: Rob Herring 
Cc: MIPS Mailing List 
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14003/
Signed-off-by: Ralf Baechle

MIPS: BMIPS: Add support SDHCI device nodes

2016-10-06T15:31:02+00:00

Adds SDHCI device nodes to BCM7xxx MIPS based SoCs.

Signed-off-by: Jaedon Shin 
Reviewed-by: Florian Fainelli 
Cc: Jonas Gorski 
Cc: Kevin Cernekee 
Cc: Rob Herring 
Cc: MIPS Mailing List 
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14002/
Signed-off-by: Ralf Baechle

MIPS: BMIPS: Add support GPIO device nodes

2016-10-06T15:31:02+00:00

Adds GPIO device nodes to BCM7xxx MIPS based SoCs.

Signed-off-by: Jaedon Shin 
Cc: Florian Fainelli 
Cc: Jonas Gorski 
Cc: Kevin Cernekee 
Cc: Rob Herring 
Cc: MIPS Mailing List 
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14001/
Signed-off-by: Ralf Baechle

MIPS: BMIPS: Add support PWM device nodes

2016-10-06T15:31:01+00:00

Adds PWM device nodes to BCM7xxx MIPS based SoCs.

Signed-off-by: Jaedon Shin 
Reviewed-by: Florian Fainelli 
Cc: Jonas Gorski 
Cc: Kevin Cernekee 
Cc: Rob Herring 
Cc: MIPS Mailing List 
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14000/
Signed-off-by: Ralf Baechle

MIPS: Malta: Use syscon-reboot driver to reboot

2016-10-06T15:31:01+00:00

Make use of the generic syscon-reboot driver to reboot the Malta board,
reducing the amount of platform code it requires.

Signed-off-by: Paul Burton 
Cc: Stephan Linz 
Cc: Jacek Anaszewski 
Cc: Bartlomiej Zolnierkiewicz 
Cc: Rob Herring 
Cc: Mark Rutland 
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14279/
Signed-off-by: Ralf Baechle