linux.git/arch/mips/boot/dts, branch v5.4.165

mips: bmips: fix syscon-reboot nodes

2021-05-14T07:44:27+00:00

[ Upstream commit cde58b861a1d365568588adda59d42351c0c4ad3 ]

Commit a23c4134955e added the clock controller nodes, incorrectly changing the
syscon-reboot nodes addresses.

Fixes: a23c4134955e ("MIPS: BMIPS: add clock controller nodes")
Signed-off-by: Álvaro Fernández Rojas 
Acked-by: Florian Fainelli 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

MIPS: qi_lb60: Fix routing to audio amplifier

2020-08-21T11:05:26+00:00

commit 0889a67a9e7a56ba39af223d536630b20b877fda upstream.

The ROUT (right channel output of audio codec) was connected to INL
(left channel of audio amplifier) instead of INR (right channel of audio
amplifier).

Fixes: 8ddebad15e9b ("MIPS: qi_lb60: Migrate to devicetree")
Cc: stable@vger.kernel.org # v5.3
Signed-off-by: Paul Cercueil 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Greg Kroah-Hartman

MIPS: dts: ar9331: fix interrupt-controller size

2019-09-30T22:22:35+00:00

It is two registers each of 4 byte.

Signed-off-by: Oleksij Rempel 
Signed-off-by: Paul Burton 
Cc: Rob Herring 
Cc: Mark Rutland 
Cc: Pengutronix Kernel Team 
Cc: Ralf Baechle 
Cc: James Hogan 
Cc: devicetree@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

MIPS: dts: mscc: describe the PTP ready interrupt

2019-08-24T14:17:37+00:00

This patch adds a description of the PTP ready interrupt, which can be
triggered when a PTP timestamp is available on an hardware FIFO.

Signed-off-by: Antoine Tenart 
Signed-off-by: Paul Burton 
Cc: davem@davemloft.net
Cc: richardcochran@gmail.com
Cc: alexandre.belloni@bootlin.com
Cc: UNGLinuxDriver@microchip.com
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: thomas.petazzoni@bootlin.com
Cc: allan.nielsen@microchip.com

MIPS: dts: mscc: describe the PTP register range

2019-08-24T14:17:33+00:00

This patch adds one register range within the mscc,vsc7514-switch node,
to describe the PTP registers.

Signed-off-by: Antoine Tenart 
Signed-off-by: Paul Burton 
Cc: davem@davemloft.net
Cc: richardcochran@gmail.com
Cc: alexandre.belloni@bootlin.com
Cc: UNGLinuxDriver@microchip.com
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: thomas.petazzoni@bootlin.com
Cc: allan.nielsen@microchip.com

Merge branch 'ingenic-tcu-v5.4' into mips-next

2019-08-08T22:33:16+00:00

Merge the Ingenic TCU patchset from the ingenic-tcu-v5.4 branch which
was created to enable follow-on changes in other subsystems.

Signed-off-by: Paul Burton

MIPS: GCW0: Reduce system timer and clocksource to 750 kHz

2019-08-08T22:31:13+00:00

The default clock (12 MHz) is too fast for the system timer.

Signed-off-by: Paul Cercueil 
Tested-by: Mathieu Malaterre 
Tested-by: Artur Rojek 
Signed-off-by: Paul Burton 
Cc: Ralf Baechle 
Cc: James Hogan 
Cc: Jonathan Corbet 
Cc: Lee Jones 
Cc: Arnd Bergmann 
Cc: Daniel Lezcano 
Cc: Thomas Gleixner 
Cc: Michael Turquette 
Cc: Stephen Boyd 
Cc: Jason Cooper 
Cc: Marc Zyngier 
Cc: Rob Herring 
Cc: Mark Rutland 
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: od@zcrc.me

MIPS: CI20: Reduce system timer and clocksource to 3 MHz

2019-08-08T22:31:13+00:00

The default clock (48 MHz) is too fast for the system timer.

Signed-off-by: Paul Cercueil 
Tested-by: Mathieu Malaterre 
Tested-by: Artur Rojek 
Signed-off-by: Paul Burton 
Cc: Ralf Baechle 
Cc: James Hogan 
Cc: Jonathan Corbet 
Cc: Lee Jones 
Cc: Arnd Bergmann 
Cc: Daniel Lezcano 
Cc: Thomas Gleixner 
Cc: Michael Turquette 
Cc: Stephen Boyd 
Cc: Jason Cooper 
Cc: Marc Zyngier 
Cc: Rob Herring 
Cc: Mark Rutland 
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: od@zcrc.me

MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz

2019-08-08T22:31:12+00:00

The default clock (12 MHz) is too fast for the system timer, which fails
to report time accurately.

Signed-off-by: Paul Cercueil 
Tested-by: Mathieu Malaterre 
Tested-by: Artur Rojek 
Signed-off-by: Paul Burton 
Cc: Ralf Baechle 
Cc: James Hogan 
Cc: Jonathan Corbet 
Cc: Lee Jones 
Cc: Arnd Bergmann 
Cc: Daniel Lezcano 
Cc: Thomas Gleixner 
Cc: Michael Turquette 
Cc: Stephen Boyd 
Cc: Jason Cooper 
Cc: Marc Zyngier 
Cc: Rob Herring 
Cc: Mark Rutland 
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: od@zcrc.me

MIPS: jz4740: Add DTS nodes for the TCU drivers

2019-08-08T22:30:09+00:00

Add DTS nodes for the JZ4780, JZ4770 and JZ4740 devicetree files.

Signed-off-by: Paul Cercueil 
Tested-by: Mathieu Malaterre 
Tested-by: Artur Rojek 
Signed-off-by: Paul Burton 
Cc: Ralf Baechle 
Cc: James Hogan 
Cc: Jonathan Corbet 
Cc: Lee Jones 
Cc: Arnd Bergmann 
Cc: Daniel Lezcano 
Cc: Thomas Gleixner 
Cc: Michael Turquette 
Cc: Stephen Boyd 
Cc: Jason Cooper 
Cc: Marc Zyngier 
Cc: Rob Herring 
Cc: Mark Rutland 
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: od@zcrc.me