linux.git/arch/mips/include, branch v3.18.111

MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset

2018-05-30T05:47:41+00:00

[ Upstream commit 05454c1bde91fb013c0431801001da82947e6b5a ]

According to the QCA u-boot source the "PCIE Phase Lock Loop
Configuration (PCIE_PLL_CONFIG)" register is for all SoCs except the
QCA955X and QCA956X at offset 0x10.

Since the PCIE PLL config register is only defined for the AR724x fix
only this value. The value is wrong since the day it was added and isn't
used by any driver yet.

Signed-off-by: Mathias Kresin 
Cc: Ralf Baechle 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16048/
Signed-off-by: James Hogan 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

MIPS: kprobes: flush_insn_slot should flush only if probe initialised

2018-04-13T17:52:19+00:00

[ Upstream commit 698b851073ddf5a894910d63ca04605e0473414e ]

When ftrace is used with kprobes, it is possible for a kprobe to contain
an invalid location (ie. only initialised to 0 and not to a specific
location in the code). Trying to perform a cache flush on such location
leads to a crash r4k_flush_icache_range().

Fixes: c1bf207d6ee1 ("MIPS: kprobe: Add support.")
Signed-off-by: Marcin Nowakowski 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16296/
Signed-off-by: Ralf Baechle 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

MIPS: End asm function prologue macros with .insn

2017-11-21T08:01:06+00:00

[ Upstream commit 08889582b8aa0bbc01a1e5a0033b9f98d2e11caa ]

When building a kernel targeting a microMIPS ISA, recent GNU linkers
will fail the link if they cannot determine that the target of a branch
or jump is microMIPS code, with errors such as the following:

    mips-img-linux-gnu-ld: arch/mips/built-in.o: .text+0x542c:
    Unsupported jump between ISA modes; consider recompiling with
    interlinking enabled.
    mips-img-linux-gnu-ld: final link failed: Bad value

or:

    ./arch/mips/include/asm/uaccess.h:1017: warning: JALX to a
    non-word-aligned address

Placing anything other than an instruction at the start of a function
written in assembly appears to trigger such errors. In order to prepare
for allowing us to follow function prologue macros with an EXPORT_SYMBOL
invocation, end the prologue macros (LEAD, NESTED & FEXPORT) with a
.insn directive. This ensures that the start of the function is marked
as code, which always makes sense for functions & safely prevents us
from hitting the link errors described above.

Signed-off-by: Paul Burton 
Reviewed-by: Maciej W. Rozycki 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14508/
Signed-off-by: Ralf Baechle 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

MIPS: Fix CM region target definitions

2017-11-15T09:04:13+00:00

commit 6a6cba1d945a7511cdfaf338526871195e420762 upstream.

The default CM target field in the GCR_BASE register is encoded with 0
meaning memory & 1 being reserved. However the definitions we use for
those bits effectively get these two values backwards - likely because
they were copied from the definitions for the CM regions where the
target is encoded differently. This results in use setting up GCR_BASE
with the reserved target value by default, rather than targeting memory
as intended. Although we currently seem to get away with this it's not a
great idea to rely upon.

Fix this by changing our macros to match the documentated target values.

The incorrect encoding became used as of commit 9f98f3dd0c51 ("MIPS: Add
generic CM probe & access code") in the Linux v3.15 cycle, and was
likely carried forwards from older but unused code introduced by
commit 39b8d5254246 ("[MIPS] Add support for MIPS CMP platform.") in the
v2.6.26 cycle.

Fixes: 9f98f3dd0c51 ("MIPS: Add generic CM probe & access code")
Signed-off-by: Paul Burton 
Reported-by: Matt Redfearn 
Reviewed-by: James Hogan 
Cc: Matt Redfearn 
Cc: Ralf Baechle 
Cc: linux-mips@linux-mips.org
Cc:  # v3.15+
Patchwork: https://patchwork.linux-mips.org/patch/17562/
Signed-off-by: James Hogan 
[jhogan@kernel.org: Backported 3.15..4.13]
Signed-off-by: Greg Kroah-Hartman

Make asm/word-at-a-time.h available on all architectures

2017-08-11T16:30:13+00:00

commit a6e2f029ae34f41adb6ae3812c32c5d326e1abd2 upstream.

Added the x86 implementation of word-at-a-time to the
generic version, which previously only supported big-endian.

Omitted the x86-specific load_unaligned_zeropad(), which in
any case is also not present for the existing BE-only
implementation of a word-at-a-time, and is only used under
CONFIG_DCACHE_WORD_ACCESS.

Added as a "generic-y" to the Kbuilds of all architectures
that didn't previously have it.

Signed-off-by: Chris Metcalf 
Signed-off-by: Greg Kroah-Hartman

MIPS: Fix unaligned PC interpretation in `compute_return_epc'

2017-07-27T22:03:27+00:00

commit 11a3799dbeb620bf0400b1fda5cc2c6bea55f20a upstream.

Fix a regression introduced with commit fb6883e5809c ("MIPS: microMIPS:
Support handling of delay slots.") and defer to `__compute_return_epc'
if the ISA bit is set in EPC with non-MIPS16, non-microMIPS hardware,
which will then arrange for a SIGBUS due to an unaligned instruction
reference.  Returning EPC here is never correct as the API defines this
function's result to be either a negative error code on failure or one
of 0 and BRANCH_LIKELY_TAKEN on success.

Fixes: fb6883e5809c ("MIPS: microMIPS: Support handling of delay slots.")
Signed-off-by: Maciej W. Rozycki 
Cc: James Hogan 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16395/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: UAPI: Ignore __arch_swab{16,32,64} when using MIPS16

2017-07-15T08:14:38+00:00

commit 71a0a72456b48de972d7ed613b06a22a3aa9057f upstream.

Some GCC versions (e.g. 4.8.3) can incorrectly inline a function with
MIPS32 instructions into another function with MIPS16 code [1], causing
the assembler to genereate incorrect binary code or fail right away
complaining about unrecognized opcode.

In the case of __arch_swab{16,32}, when inlined by the compiler with
flags `-mips32r2 -mips16 -Os', the assembler can fail with the following
error.

    {standard input}:79: Error: unrecognized opcode `wsbh $2,$2'

For performance concerns and to workaround the issue already existing in
older compilers, just ignore these 2 functions when compiling with
mips16 enabled.

 [1] Inlining nomips16 function into mips16 function can result in
     undefined builtins, https://gcc.gnu.org/bugzilla/show_bug.cgi?id=55777

Signed-off-by: Yousong Zhou 
Cc: Maciej W. Rozycki 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11241/
Signed-off-by: Ralf Baechle 
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

MIPS: asm: compiler: Add new macros to set ISA and arch asm annotations

2017-04-30T03:49:15+00:00

commit be5136988e25ae0dc8379fcb937efc63d87aba9e upstream.

There are certain places where the code uses .set mips32 or .set mips64
or .set arch=r4000. In preparation of MIPS R6 support, and in order to
use as less #ifdefs as possible, we define new macros to set similar
annotations for MIPS R6.

Signed-off-by: Markos Chandras 
Cc: Arnd Bergmann 
Signed-off-by: Greg Kroah-Hartman

mips: copy_from_user() must zero the destination on access_ok() failure

2016-10-06T02:40:20+00:00

[ Upstream commit e69d700535ac43a18032b3c399c69bf4639e89a2 ]

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro 
Signed-off-by: Sasha Levin

MIPS: Add a missing ".set pop" in an early commit

2016-10-06T02:40:20+00:00

[ Upstream commit 3cbc6fc9c99f1709203711f125bc3b79487aba06 ]

Commit 842dfc11ea9a21 ("MIPS: Fix build with binutils 2.24.51+") missing
a ".set pop" in macro fpu_restore_16even, so add it.

Signed-off-by: Huacai Chen 
Acked-by: Manuel Lauss 
Cc: Steven J . Hill 
Cc: Fuxin Zhang 
Cc: Zhangjin Wu 
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.18+
Patchwork: https://patchwork.linux-mips.org/patch/14210/
Signed-off-by: Ralf Baechle 
Signed-off-by: Sasha Levin