linux.git/arch/mips, branch v4.1.17

net: filter: make JITs zero A for SKF_AD_ALU_XOR_X

2016-01-31T19:23:36+00:00

[ Upstream commit 55795ef5469290f89f04e12e662ded604909e462 ]

The SKF_AD_ALU_XOR_X ancillary is not like the other ancillary data
instructions since it XORs A with X while all the others replace A with
some loaded value.  All the BPF JITs fail to clear A if this is used as
the first instruction in a filter.  This was found using american fuzzy
lop.

Add a helper to determine if A needs to be cleared given the first
instruction in a filter, and use this in the JITs.  Except for ARM, the
rest have only been compile-tested.

Fixes: 3480593131e0 ("net: filter: get rid of BPF_S_* enum")
Signed-off-by: Rabin Vincent 
Acked-by: Daniel Borkmann 
Acked-by: Alexei Starovoitov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

MIPS: KVM: Uninit VCPU in vcpu_create error path

2015-12-09T19:03:16+00:00

commit 585bb8f9a5e592f2ce7abbe5ed3112d5438d2754 upstream.

If either of the memory allocations in kvm_arch_vcpu_create() fail, the
vcpu which has been allocated and kvm_vcpu_init'd doesn't get uninit'd
in the error handling path. Add a call to kvm_vcpu_uninit() to fix this.

Fixes: 669e846e6c4e ("KVM/MIPS32: MIPS arch specific APIs for KVM")
Signed-off-by: James Hogan 
Cc: Ralf Baechle 
Cc: Paolo Bonzini 
Cc: Gleb Natapov 
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini 
Signed-off-by: Greg Kroah-Hartman

MIPS: KVM: Fix CACHE immediate offset sign extension

2015-12-09T19:03:16+00:00

commit c5c2a3b998f1ff5a586f9d37e154070b8d550d17 upstream.

The immediate field of the CACHE instruction is signed, so ensure that
it gets sign extended by casting it to an int16_t rather than just
masking the low 16 bits.

Fixes: e685c689f3a8 ("KVM/MIPS32: Privileged instruction/target branch emulation.")
Signed-off-by: James Hogan 
Cc: Ralf Baechle 
Cc: Paolo Bonzini 
Cc: Gleb Natapov 
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini 
Signed-off-by: Greg Kroah-Hartman

MIPS: KVM: Fix ASID restoration logic

2015-12-09T19:03:15+00:00

commit 002374f371bd02df864cce1fe85d90dc5b292837 upstream.

ASID restoration on guest resume should determine the guest execution
mode based on the guest Status register rather than bit 30 of the guest
PC.

Fix the two places in locore.S that do this, loading the guest status
from the cop0 area. Note, this assembly is specific to the trap &
emulate implementation of KVM, so it doesn't need to check the
supervisor bit as that mode is not implemented in the guest.

Fixes: b680f70fc111 ("KVM/MIPS32: Entry point for trampolining to...")
Signed-off-by: James Hogan 
Cc: Ralf Baechle 
Cc: Paolo Bonzini 
Cc: Gleb Natapov 
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini 
Signed-off-by: Greg Kroah-Hartman

MIPS: lantiq: add clk_round_rate()

2015-12-09T19:03:15+00:00

commit 4e7d30dba493b60a80e9b590add1b4402265cc83 upstream.

This adds a basic implementation of clk_round_rate()
The clk_round_rate() function is called by multiple drivers and
subsystems now and the lantiq clk driver is supposed to export this,
but doesn't do so, this causes linking problems like this one:
ERROR: "clk_round_rate" [drivers/media/v4l2-core/videodev.ko] undefined!

Signed-off-by: Hauke Mehrtens 
Acked-by: John Crispin 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11358/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: Fix console output for Fulong2e system

2015-10-22T21:43:27+00:00

commit fc2ca674470bbfe11d72a20a3f19fd3dc43bfca0 upstream.

Commit 3adeb2566b9b ("MIPS: Loongson: Improve LEFI firmware interface")
made the number of UARTs dynamic if LEFI_FIRMWARE_INTERFACE is configured.
Unfortunately, it did not initialize the number of UARTs if
LEFI_FIRMWARE_INTERFACE is not configured. As a result, the Fulong2e
system has no console.

Fixes: 3adeb2566b9b ("MIPS: Loongson: Improve LEFI firmware interface")
Acked-by: Huacai Chen 
Signed-off-by: Guenter Roeck 
Tested-by: Markos Chandras 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11076/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: dma-default: Fix 32-bit fall back to GFP_DMA

2015-10-22T21:43:23+00:00

commit 53960059d56ecef67d4ddd546731623641a3d2d1 upstream.

If there is a DMA zone (usually 24bit = 16MB I believe), but no DMA32
zone, as is the case for some 32-bit kernels, then massage_gfp_flags()
will cause DMA memory allocated for devices with a 32..63-bit
coherent_dma_mask to fall back to using __GFP_DMA, even though there may
only be 32-bits of physical address available anyway.

Correct that case to compare against a mask the size of phys_addr_t
instead of always using a 64-bit mask.

Signed-off-by: James Hogan 
Fixes: a2e715a86c6d ("MIPS: DMA: Fix computation of DMA flags from device's coherent_dma_mask.")
Cc: Ralf Baechle 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9610/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

lib/decompressors: use real out buf size for gunzip with kernel

2015-09-29T17:26:19+00:00

commit 2d3862d26e67a59340ba1cf1748196c76c5787de upstream.

When loading x86 64bit kernel above 4GiB with patched grub2, got kernel
gunzip error.

| early console in decompress_kernel
| decompress_kernel:
|       input: [0x807f2143b4-0x807ff61aee]
|      output: [0x807cc00000-0x807f3ea29b] 0x027ea29c: output_len
| boot via startup_64
| KASLR using RDTSC...
|  new output: [0x46fe000000-0x470138cfff] 0x0338d000: output_run_size
|  decompress: [0x46fe000000-0x47007ea29b] <=== [0x807f2143b4-0x807ff61aee]
|
| Decompressing Linux... gz...
|
| uncompression error
|
| -- System halted

the new buffer is at 0x46fe000000ULL, decompressor_gzip is using
0xffffffb901ffffff as out_len.  gunzip in lib/zlib_inflate/inflate.c cap
that len to 0x01ffffff and decompress fails later.

We could hit this problem with crashkernel booting that uses kexec loading
kernel above 4GiB.

We have decompress_* support:
    1. inbuf[]/outbuf[] for kernel preboot.
    2. inbuf[]/flush() for initramfs
    3. fill()/flush() for initrd.
This bug only affect kernel preboot path that use outbuf[].

Add __decompress and take real out_buf_len for gunzip instead of guessing
wrong buf size.

Fixes: 1431574a1c4 (lib/decompressors: fix "no limit" output buffer length)
Signed-off-by: Yinghai Lu 
Cc: Alexandre Courbot 
Cc: Jon Medhurst 
Cc: Stephen Warren 
Cc: "H. Peter Anvin" 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

MIPS: math-emu: Emulate missing BC1{EQ,NE}Z instructions

2015-09-29T17:25:57+00:00

commit c909ca718e8f50cf484ef06a8dd935e738e8e53d upstream.

Commit c8a34581ec09 ("MIPS: Emulate the BC1{EQ,NE}Z FPU instructions")
added support for emulating the new R6 BC1{EQ,NE}Z branches but it missed
the case where the instruction that caused the exception was not on a DS.

Signed-off-by: Markos Chandras 
Fixes: c8a34581ec09 ("MIPS: Emulate the BC1{EQ,NE}Z FPU instructions")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10738/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: math-emu: Allow m{f,t}hc emulation on MIPS R6

2015-09-29T17:25:56+00:00

commit e8f80cc1a6d80587136b015e989a12827e1fcfe5 upstream.

The mfhc/mthc instructions are supported on MIPS R6 so emulate
them if needed.

Signed-off-by: Markos Chandras 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10737/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman