linux.git/arch/mips, branch v4.14.124

KVM: s390: Do not report unusabled IDs via KVM_CAP_MAX_VCPU_ID

2019-06-09T07:18:16+00:00

commit a86cb413f4bf273a9d341a3ab2c2ca44e12eb317 upstream.

KVM_CAP_MAX_VCPU_ID is currently always reporting KVM_MAX_VCPU_ID on all
architectures. However, on s390x, the amount of usable CPUs is determined
during runtime - it is depending on the features of the machine the code
is running on. Since we are using the vcpu_id as an index into the SCA
structures that are defined by the hardware (see e.g. the sca_add_vcpu()
function), it is not only the amount of CPUs that is limited by the hard-
ware, but also the range of IDs that we can use.
Thus KVM_CAP_MAX_VCPU_ID must be determined during runtime on s390x, too.
So the handling of KVM_CAP_MAX_VCPU_ID has to be moved from the common
code into the architecture specific code, and on s390x we have to return
the same value here as for KVM_CAP_MAX_VCPUS.
This problem has been discovered with the kvm_create_max_vcpus selftest.
With this change applied, the selftest now passes on s390x, too.

Reviewed-by: Andrew Jones 
Reviewed-by: Cornelia Huck 
Reviewed-by: David Hildenbrand 
Signed-off-by: Thomas Huth 
Message-Id: <20190523164309.13345-9-thuth@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger 
Signed-off-by: Greg Kroah-Hartman

MIPS: VDSO: Reduce VDSO_RANDOMIZE_SIZE to 64MB for 64bit

2019-05-16T17:42:25+00:00

[ Upstream commit c61c7def1fa0a722610d89790e0255b74f3c07dd ]

Commit ea7e0480a4b6 ("MIPS: VDSO: Always map near top of user memory")
set VDSO_RANDOMIZE_SIZE to 256MB for 64bit kernel. But take a look at
arch/mips/mm/mmap.c we can see that MIN_GAP is 128MB, which means the
mmap_base may be at (user_address_top - 128MB). This make the stack be
surrounded by mmaped areas, then stack expanding fails and causes a
segmentation fault. Therefore, VDSO_RANDOMIZE_SIZE should be less than
MIN_GAP and this patch reduce it to 64MB.

Signed-off-by: Huacai Chen 
Signed-off-by: Paul Burton 
Fixes: ea7e0480a4b6 ("MIPS: VDSO: Always map near top of user memory")
Patchwork: https://patchwork.linux-mips.org/patch/20910/
Cc: Ralf Baechle 
Cc: James Hogan 
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang 
Cc: Zhangjin Wu 
Cc: Huacai Chen 
Signed-off-by: Sasha Levin

MIPS: perf: ath79: Fix perfcount IRQ assignment

2019-05-16T17:42:23+00:00

[ Upstream commit a1e8783db8e0d58891681bc1e6d9ada66eae8e20 ]

Currently it's not possible to use perf on ath79 due to genirq flags
mismatch happening on static virtual IRQ 13 which is used for
performance counters hardware IRQ 5.

On TP-Link Archer C7v5:

           CPU0
  2:          0      MIPS   2  ath9k
  4:        318      MIPS   4  19000000.eth
  7:      55034      MIPS   7  timer
  8:       1236      MISC   3  ttyS0
 12:          0      INTC   1  ehci_hcd:usb1
 13:          0  gpio-ath79   2  keys
 14:          0  gpio-ath79   5  keys
 15:         31  AR724X PCI    1  ath10k_pci

 $ perf top
 genirq: Flags mismatch irq 13. 00014c83 (mips_perf_pmu) vs. 00002003 (keys)

On TP-Link Archer C7v4:

         CPU0
  4:          0      MIPS   4  19000000.eth
  5:       7135      MIPS   5  1a000000.eth
  7:      98379      MIPS   7  timer
  8:         30      MISC   3  ttyS0
 12:      90028      INTC   0  ath9k
 13:       5520      INTC   1  ehci_hcd:usb1
 14:       4623      INTC   2  ehci_hcd:usb2
 15:      32844  AR724X PCI    1  ath10k_pci
 16:          0  gpio-ath79  16  keys
 23:          0  gpio-ath79  23  keys

 $ perf top
 genirq: Flags mismatch irq 13. 00014c80 (mips_perf_pmu) vs. 00000080 (ehci_hcd:usb1)

This problem is happening, because currently statically assigned virtual
IRQ 13 for performance counters is not claimed during the initialization
of MIPS PMU during the bootup, so the IRQ subsystem doesn't know, that
this interrupt isn't available for further use.

So this patch fixes the issue by simply booking hardware IRQ 5 for MIPS PMU.

Tested-by: Kevin 'ldir' Darbyshire-Bryant 
Signed-off-by: Petr Štetiar 
Acked-by: John Crispin 
Acked-by: Marc Zyngier 
Signed-off-by: Paul Burton 
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle 
Cc: James Hogan 
Cc: Thomas Gleixner 
Cc: Jason Cooper 
Signed-off-by: Sasha Levin

MIPS: KGDB: fix kgdb support for SMP platforms.

2019-05-10T15:53:09+00:00

[ Upstream commit ab8a6d821179ab9bea1a9179f535ccba6330c1ed ]

KGDB_call_nmi_hook is called by other cpu through smp call.
MIPS smp call is processed in ipi irq handler and regs is saved in
 handle_int.
So kgdb_call_nmi_hook get regs by get_irq_regs and regs will be passed
 to kgdb_cpu_enter.

Signed-off-by: Chong Qiao 
Reviewed-by: Douglas Anderson 
Acked-by: Daniel Thompson 
Signed-off-by: Paul Burton 
Cc: Ralf Baechle 
Cc: James Hogan 
Cc: Will Deacon 
Cc: Christophe Leroy 
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: QiaoChong 
Signed-off-by: Sasha Levin

MIPS: scall64-o32: Fix indirect syscall number load

2019-05-02T07:40:28+00:00

commit 79b4a9cf0e2ea8203ce777c8d5cfa86c71eae86e upstream.

Commit 4c21b8fd8f14 (MIPS: seccomp: Handle indirect system calls (o32))
added indirect syscall detection for O32 processes running on MIPS64,
but it did not work correctly for big endian kernel/processes. The
reason is that the syscall number is loaded from ARG1 using the lw
instruction while this is a 64-bit value, so zero is loaded instead of
the syscall number.

Fix the code by using the ld instruction instead. When running a 32-bit
processes on a 64 bit CPU, the values are properly sign-extended, so it
ensures the value passed to syscall_trace_enter is correct.

Recent systemd versions with seccomp enabled whitelist the getpid
syscall for their internal  processes (e.g. systemd-journald), but call
it through syscall(SYS_getpid). This fix therefore allows O32 big endian
systems with a 64-bit kernel to run recent systemd versions.

Signed-off-by: Aurelien Jarno 
Cc:  # v3.15+
Reviewed-by: Philippe Mathieu-Daudé 
Signed-off-by: Paul Burton 
Cc: Ralf Baechle 
Cc: James Hogan 
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

MIPS: Fix kernel crash for R6 in jump label branch function

2019-03-27T05:13:52+00:00

commit 47c25036b60f27b86ab44b66a8861bcf81cde39b upstream.

Insert Branch instruction instead of NOP to make sure assembler don't
patch code in forbidden slot. In jump label function, it might
be possible to patch Control Transfer Instructions(CTIs) into
forbidden slot, which will generate Reserved Instruction exception
in MIPS release 6.

Signed-off-by: Archer Yan 
Reviewed-by: Paul Burton 
[paul.burton@mips.com:
  - Add MIPS prefix to subject.
  - Mark for stable from v4.0, which introduced r6 support, onwards.]
Signed-off-by: Paul Burton 
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Greg Kroah-Hartman

MIPS: Ensure ELF appended dtb is relocated

2019-03-27T05:13:52+00:00

commit 3f0a53bc6482fb09770982a8447981260ea258dc upstream.

This fixes booting with the combination of CONFIG_RELOCATABLE=y
and CONFIG_MIPS_ELF_APPENDED_DTB=y.

Sections that appear after the relocation table are not relocated
on system boot (except .bss, which has special handling).

With CONFIG_MIPS_ELF_APPENDED_DTB, the dtb is part of the
vmlinux ELF, so it must be relocated together with everything else.

Fixes: 069fd766271d ("MIPS: Reserve space for relocation table")
Signed-off-by: Yasha Cherikovsky 
Signed-off-by: Paul Burton 
Cc: Ralf Baechle 
Cc: Paul Burton 
Cc: James Hogan 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Greg Kroah-Hartman

mips: loongson64: lemote-2f: Add IRQF_NO_SUSPEND to "cascade" irqaction.

2019-03-27T05:13:52+00:00

commit 5f5f67da9781770df0403269bc57d7aae608fecd upstream.

Timekeeping IRQs from CS5536 MFGPT are routed to i8259, which then
triggers the "cascade" IRQ on MIPS CPU. Without IRQF_NO_SUSPEND in
cascade_irqaction, MFGPT interrupts will be masked in suspend mode,
and the machine would be unable to resume once suspended.

Previously, MIPS IRQs were not disabled properly, so the original
code appeared to work. Commit a3e6c1eff5 ("MIPS: IRQ: Fix disable_irq on
CPU IRQs") uncovers the bug. To fix it, add IRQF_NO_SUSPEND to
cascade_irqaction.

This commit is functionally identical to 0add9c2f1cff ("MIPS:
Loongson-3: Add IRQF_NO_SUSPEND to Cascade irqaction"), but it forgot
to apply the same fix to Loongson2.

Signed-off-by: Yifeng Li 
Signed-off-by: Paul Burton 
Cc: linux-mips@vger.kernel.org
Cc: Jiaxun Yang 
Cc: Huacai Chen 
Cc: Ralf Baechle 
Cc: James Hogan 
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: Greg Kroah-Hartman

KVM: Call kvm_arch_memslots_updated() before updating memslots

2019-03-23T13:35:31+00:00

commit 152482580a1b0accb60676063a1ac57b2d12daf6 upstream.

kvm_arch_memslots_updated() is at this point in time an x86-specific
hook for handling MMIO generation wraparound.  x86 stashes 19 bits of
the memslots generation number in its MMIO sptes in order to avoid
full page fault walks for repeat faults on emulated MMIO addresses.
Because only 19 bits are used, wrapping the MMIO generation number is
possible, if unlikely.  kvm_arch_memslots_updated() alerts x86 that
the generation has changed so that it can invalidate all MMIO sptes in
case the effective MMIO generation has wrapped so as to avoid using a
stale spte, e.g. a (very) old spte that was created with generation==0.

Given that the purpose of kvm_arch_memslots_updated() is to prevent
consuming stale entries, it needs to be called before the new generation
is propagated to memslots.  Invalidating the MMIO sptes after updating
memslots means that there is a window where a vCPU could dereference
the new memslots generation, e.g. 0, and incorrectly reuse an old MMIO
spte that was created with (pre-wrap) generation==0.

Fixes: e59dbe09f8e6 ("KVM: Introduce kvm_arch_memslots_updated()")
Cc: 
Signed-off-by: Sean Christopherson 
Signed-off-by: Paolo Bonzini 
Signed-off-by: Greg Kroah-Hartman

MIPS: Remove function size check in get_frame_info()

2019-03-13T21:03:22+00:00

[ Upstream commit 2b424cfc69728224fcb5fad138ea7260728e0901 ]

Patch (b6c7a324df37b "MIPS: Fix get_frame_info() handling of
microMIPS function size.") introduces additional function size
check for microMIPS by only checking insn between ip and ip + func_size.
However, func_size in get_frame_info() is always 0 if KALLSYMS is not
enabled. This causes get_frame_info() to return immediately without
calculating correct frame_size, which in turn causes "Can't analyze
schedule() prologue" warning messages at boot time.

This patch removes func_size check, and let the frame_size check run
up to 128 insns for both MIPS and microMIPS.

Signed-off-by: Jun-Ru Chang 
Signed-off-by: Tony Wu 
Signed-off-by: Paul Burton 
Fixes: b6c7a324df37b ("MIPS: Fix get_frame_info() handling of microMIPS function size.")
Cc: 
Cc: 
Cc: 
Cc: 
Cc: 
Cc: 
Cc: 
Cc: 
Signed-off-by: Sasha Levin