linux.git/arch/openrisc, branch v4.19.258

openrisc: start CPU timer early in boot

2022-06-14T14:59:17+00:00

[ Upstream commit 516dd4aacd67a0f27da94f3fe63fe0f4dbab6e2b ]

In order to measure the boot process, the timer should be switched on as
early in boot as possible. As well, the commit defines the get_cycles
macro, like the previous patches in this series, so that generic code is
aware that it's implemented by the platform, as is done on other archs.

Cc: Thomas Gleixner 
Cc: Arnd Bergmann 
Cc: Jonas Bonn 
Cc: Stefan Kristiansson 
Acked-by: Stafford Horne 
Reported-by: Guenter Roeck 
Signed-off-by: Jason A. Donenfeld 
Signed-off-by: Sasha Levin

openrisc: don't printk() unconditionally

2021-09-22T09:48:01+00:00

[ Upstream commit 946e1052cdcc7e585ee5d1e72528ca49fb295243 ]

Don't call printk() when CONFIG_PRINTK is not set.
Fixes the following build errors:

or1k-linux-ld: arch/openrisc/kernel/entry.o: in function `_external_irq_handler':
(.text+0x804): undefined reference to `printk'
(.text+0x804): relocation truncated to fit: R_OR1K_INSN_REL_26 against undefined symbol `printk'

Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Signed-off-by: Randy Dunlap 
Reported-by: kernel test robot 
Cc: Jonas Bonn 
Cc: Stefan Kristiansson 
Cc: Stafford Horne 
Cc: openrisc@lists.librecores.org
Signed-off-by: Stafford Horne 
Signed-off-by: Sasha Levin

openrisc: Define memory barrier mb

2021-06-03T06:38:10+00:00

[ Upstream commit 8b549c18ae81dbc36fb11e4aa08b8378c599ca95 ]

This came up in the discussion of the requirements of qspinlock on an
architecture.  OpenRISC uses qspinlock, but it was noticed that the
memmory barrier was not defined.

Peter defined it in the mail thread writing:

    As near as I can tell this should do. The arch spec only lists
    this one instruction and the text makes it sound like a completion
    barrier.

This is correct so applying this patch.

Signed-off-by: Peter Zijlstra 
[shorne@gmail.com:Turned the mail into a patch]
Signed-off-by: Stafford Horne 
Signed-off-by: Sasha Levin

openrisc: Fix a memory leak

2021-05-26T09:48:31+00:00

[ Upstream commit c019d92457826bb7b2091c86f36adb5de08405f9 ]

'setup_find_cpu_node()' take a reference on the node it returns.
This reference must be decremented when not needed anymore, or there will
be a leak.

Add the missing 'of_node_put(cpu)'.

Note that 'setup_cpuinfo()' that also calls this function already has a
correct 'of_node_put(cpu)' at its end.

Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Signed-off-by: Christophe JAILLET 
Signed-off-by: Stafford Horne 
Signed-off-by: Sasha Levin

openrisc: Fix cache API compile issue when not inlining

2020-09-23T10:10:58+00:00

[ Upstream commit 3ae90d764093dfcd6ab8ab6875377302892c87d4 ]

I found this when compiling a kbuild random config with GCC 11.  The
config enables CONFIG_DEBUG_SECTION_MISMATCH, which sets CFLAGS
-fno-inline-functions-called-once. This causes the call to cache_loop in
cache.c to not be inlined causing the below compile error.

    In file included from arch/openrisc/mm/cache.c:13:
    arch/openrisc/mm/cache.c: In function 'cache_loop':
    ./arch/openrisc/include/asm/spr.h:16:27: warning: 'asm' operand 0 probably does not match constraints
       16 | #define mtspr(_spr, _val) __asm__ __volatile__ (  \
	  |                           ^~~~~~~
    arch/openrisc/mm/cache.c:25:3: note: in expansion of macro 'mtspr'
       25 |   mtspr(reg, line);
	  |   ^~~~~
    ./arch/openrisc/include/asm/spr.h:16:27: error: impossible constraint in 'asm'
       16 | #define mtspr(_spr, _val) __asm__ __volatile__ (  \
	  |                           ^~~~~~~
    arch/openrisc/mm/cache.c:25:3: note: in expansion of macro 'mtspr'
       25 |   mtspr(reg, line);
	  |   ^~~~~
    make[1]: *** [scripts/Makefile.build:283: arch/openrisc/mm/cache.o] Error 1

The asm constraint "K" requires a immediate constant argument to mtspr,
however because of no inlining a register argument is passed causing a
failure.  Fix this by using __always_inline.

Link: https://lore.kernel.org/lkml/202008200453.ohnhqkjQ%25lkp@intel.com/
Signed-off-by: Stafford Horne 
Signed-off-by: Sasha Levin

openrisc: Fix oops caused when dumping stack

2020-08-21T09:05:37+00:00

[ Upstream commit 57b8e277c33620e115633cdf700a260b55095460 ]

When dumping a stack with 'cat /proc/#/stack' the kernel would oops.
For example:

    # cat /proc/690/stack
    Unable to handle kernel access
     at virtual address 0x7fc60f58

    Oops#: 0000
    CPU #: 0
       PC: c00097fc    SR: 0000807f    SP: d6f09b9c
    GPR00: 00000000 GPR01: d6f09b9c GPR02: d6f09bb8 GPR03: d6f09bc4
    GPR04: 7fc60f5c GPR05: c00099b4 GPR06: 00000000 GPR07: d6f09ba3
    GPR08: ffffff00 GPR09: c0009804 GPR10: d6f08000 GPR11: 00000000
    GPR12: ffffe000 GPR13: dbb86000 GPR14: 00000001 GPR15: dbb86250
    GPR16: 7fc60f63 GPR17: 00000f5c GPR18: d6f09bc4 GPR19: 00000000
    GPR20: c00099b4 GPR21: ffffffc0 GPR22: 00000000 GPR23: 00000000
    GPR24: 00000001 GPR25: 000002c6 GPR26: d78b6850 GPR27: 00000001
    GPR28: 00000000 GPR29: dbb86000 GPR30: ffffffff GPR31: dbb862fc
      RES: 00000000 oGPR11: ffffffff
    Process cat (pid: 702, stackpage=d79d6000)

    Stack:
    Call trace:
    [<598977f2>] save_stack_trace_tsk+0x40/0x74
    [<95063f0e>] stack_trace_save_tsk+0x44/0x58
    [] proc_pid_stack+0xd0/0x13c
    [] proc_single_show+0x6c/0xf0
    [] seq_read+0x1b4/0x688
    [<2d6c7480>] do_iter_read+0x208/0x248
    [<2182a2fb>] vfs_readv+0x64/0x90

This was caused by the stack trace code in save_stack_trace_tsk using
the wrong stack pointer.  It was using the user stack pointer instead of
the kernel stack pointer.  Fix this by using the right stack.

Also for good measure we add try_get_task_stack/put_task_stack to ensure
the task is not lost while we are walking it's stack.

Fixes: eecac38b0423a ("openrisc: support framepointers and STACKTRACE_SUPPORT")
Signed-off-by: Stafford Horne 
Signed-off-by: Sasha Levin

openrisc: Fix issue with argument clobbering for clone/fork

2020-06-25T13:33:01+00:00

[ Upstream commit 6bd140e14d9aaa734ec37985b8b20a96c0ece948 ]

Working on the OpenRISC glibc port I found that sometimes clone was
working strange.  That the tls data argument sent in r7 was always
wrong.  Further investigation revealed that the arguments were getting
clobbered in the entry code.  This patch removes the code that writes to
the argument registers.  This was likely due to some old code hanging
around.

This patch fixes this up for clone and fork.  This fork clobber is
harmless but also useless so remove.

Signed-off-by: Stafford Horne 
Signed-off-by: Sasha Levin

arch/openrisc: Fix issues with access_ok()

2020-06-22T07:04:59+00:00

commit 9cb2feb4d21d97386eb25c7b67e2793efcc1e70a upstream.

The commit 594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'")
exposed incorrect implementations of access_ok() macro in several
architectures.  This change fixes 2 issues found in OpenRISC.

OpenRISC was not properly using parenthesis for arguments and also using
arguments twice.  This patch fixes those 2 issues.

I test booted this patch with v5.0-rc1 on qemu and it's working fine.

Cc: Guenter Roeck 
Cc: Linus Torvalds 
Reported-by: Linus Torvalds 
Signed-off-by: Stafford Horne 
Signed-off-by: Linus Torvalds 
Signed-off-by: Miles Chen 
Signed-off-by: Greg Kroah-Hartman

openrisc: Fix broken paths to arch/or32

2019-12-05T08:20:40+00:00

[ Upstream commit 57ce8ba0fd3a95bf29ed741df1c52bd591bf43ff ]

OpenRISC was mainlined as "openrisc", not "or32".
vmlinux.lds is generated from vmlinux.lds.S.

Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Stafford Horne 
Signed-off-by: Sasha Levin

Merge tag 'for-linus' of git://github.com/openrisc/linux

2018-08-23T21:09:37+00:00

Pull OpenRISC update from Stafford Horne:
 "Just one change for 4.19: refactoring from Christoph Hellwig to use
  generic DMA facilities"

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: use generic dma_noncoherent_ops
  openrisc: fix cache maintainance the the sync_single_for_device DMA operation
  openrisc: remove the no-op unmap_page and unmap_sg DMA operations
  openrisc: remove the sync_single_for_cpu DMA operation