[ Upstream commit bb344ca5b90df62b1a3b7a35c6a9d00b306a170d ] Commit 746c9e9f92dd "of/base: Fix PowerPC address parsing hack" limited the applicability of the workaround whereby a missing ranges is treated as an empty ranges. This workaround was hiding a bug in the etsec2 device tree nodes, which have children with reg, but did not have ranges. Signed-off-by: Scott Wood <scottwood@freescale.com> Reported-by: Alexander Graf <agraf@suse.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Freescale updates from Scott (27 commits): "Highlights include DMA32 zone support (SATA, USB, etc now works on 64-bit FSL kernels), MSI changes, 8xx optimizations and cleanup, t104x board support, and PrPMC PCI enumeration."
Change USB controller version to 2.5 in compatible string for T2080/T2081 Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
T1042RDB_PI is Freescale Reference Design Board supporting the T1042
QorIQ Power Architecture™ processor. T1042 is a reduced personality
of T1040 SoC without Integrated 8-port Gigabit. The board is designed
with low power features targeted for Printing Image Market.
T1042RDB_PI is similar to T1040RDB board with few differences like
it has video interface, supports T1042 personality only
T1042RDB_PI board Overview
-----------------------
- SERDES Connections, 8 lanes supporting:
- PCI
- SATA 2.0
- DDR Controller
- Supports rates of up to 1600 MHz data-rate
- Supports one DDR3LP UDIMM
-IFC/Local Bus
- NAND flash: 1GB 8-bit NAND flash
- NOR: 128MB 16-bit NOR Flash
- Ethernet
- Two on-board RGMII 10/100/1G ethernet ports.
- PHY #0 remains powered up during deep-sleep
- CPLD
- Clocks
- System and DDR clock (SYSCLK, “DDRCLK”)
- SERDES clocks
- Power Supplies
- USB
- Supports two USB 2.0 ports with integrated PHYs
- Two type A ports with 5V@1.5A per port.
- SDHC
- SDHC/SDXC connector
- SPI
- On-board 64MB SPI flash
- I2C
- Device connected: EEPROM, thermal monitor, VID controller, RTC
- Other IO
- Two Serial ports
- ProfiBus port
Add support for T1042RDB_PI board:
-add device tree
-Add entry in corenet_generic.c, as it is similar to other corenet platforms
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
T1040/T1042RDB is Freescale Reference Design Board.
The board can support both T1040/T1042 QorIQ Power Architecture™ processor.
T1040/T1042RDB board Overview
-----------------------
- SERDES Connections, 8 lanes supporting:
- PCI
- SGMII
- QSGMII
- SATA 2.0
- DDR Controller
- Supports rates of up to 1600 MHz data-rate
- Supports one DDR3LP UDIMM
-IFC/Local Bus
- NAND flash: 1GB 8-bit NAND flash
- NOR: 128MB 16-bit NOR Flash
- Ethernet
- Two on-board RGMII 10/100/1G ethernet ports.
- PHY #0 remains powered up during deep-sleep
- CPLD
- Clocks
- System and DDR clock (SYSCLK, “DDRCLK”)
- SERDES clocks
- Power Supplies
- USB
- Supports two USB 2.0 ports with integrated PHYs
- Two type A ports with 5V@1.5A per port.
- SDHC
- SDHC/SDXC connector
- SPI
- On-board 64MB SPI flash
- I2C
- Devices connected: EEPROM, thermal monitor, VID controller
- Other IO
- Two Serial ports
- ProfiBus port
Add support for T1040/T1042 RDB board:
-add device tree
-add entry in Kconfig to build
-Add entry in corenet_generic.c, as it is similar to other corenet platforms
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Change USB controller version to 2.5 in compatible string for T4240 Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
Pull slave-dma updates from Vinod Koul:
"Some notable changes are:
- new driver for AMBA AXI NBPF by Guennadi
- new driver for sun6i controller by Maxime
- pl330 drivers fixes from Lar's
- sh-dma updates and fixes from Laurent, Geert and Kuninori
- Documentation updates from Geert
- drivers fixes and updates spread over dw, edma, freescale, mpc512x
etc.."
* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (72 commits)
dmaengine: sun6i: depends on RESET_CONTROLLER
dma: at_hdmac: fix invalid remaining bytes detection
dmaengine: nbpfaxi: don't build this driver where it cannot be used
dmaengine: nbpf_error_get_channel() can be static
dma: pl08x: Use correct specifier for size_t values
dmaengine: Remove the context argument to the prep_dma_cyclic operation
dmaengine: nbpfaxi: convert to tasklet
dmaengine: nbpfaxi: fix a theoretical race
dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores
dmaengine: add device tree binding documentation for the nbpfaxi driver
dmaengine: edma: Do not register second device when booted with DT
dmaengine: edma: Do not change the error code returned from edma_alloc_slot
dmaengine: rcar-dmac: Add device tree bindings documentation
dmaengine: shdma: Allocate cyclic sg list dynamically
dmaengine: shdma: Make channel filter ignore unrelated devices
dmaengine: sh: Rework Kconfig and Makefile
dmaengine: sun6i: Fix memory leaks
dmaengine: sun6i: Free the interrupt before killing the tasklet
dmaengine: sun6i: Remove switch statement from buswidth convertion routine
dmaengine: of: kconfig: select DMA_ENGINE when DMA_OF is selected
...
Pull powerpc updates from Ben Herrenschmidt: "This is the powerpc new goodies for 3.17. The short story: The biggest bit is Michael removing all of pre-POWER4 processor support from the 64-bit kernel. POWER3 and rs64. This gets rid of a ton of old cruft that has been bitrotting in a long while. It was broken for quite a few versions already and nobody noticed. Nobody uses those machines anymore. While at it, he cleaned up a bunch of old dusty cabinets, getting rid of a skeletton or two. Then, we have some base VFIO support for KVM, which allows assigning of PCI devices to KVM guests, support for large 64-bit BARs on "powernv" platforms, support for HMI (Hardware Management Interrupts) on those same platforms, some sparse-vmemmap improvements (for memory hotplug), There is the usual batch of Freescale embedded updates (summary in the merge commit) and fixes here or there, I think that's it for the highlights" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits) powerpc/eeh: Export eeh_iommu_group_to_pe() powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API powerpc: Reduce scariness of interrupt frames in stack traces powerpc: start loop at section start of start in vmemmap_populated() powerpc: implement vmemmap_free() powerpc: implement vmemmap_remove_mapping() for BOOK3S powerpc: implement vmemmap_list_free() powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE powerpc/book3s: Fix endianess issue for HMI handling on napping cpus. powerpc/book3s: handle HMIs for cpus in nap mode. powerpc/powernv: Invoke opal call to handle hmi. powerpc/book3s: Add basic infrastructure to handle HMI in Linux. powerpc/iommu: Fix comments with it_page_shift powerpc/powernv: Handle compound PE in config accessors powerpc/powernv: Handle compound PE for EEH powerpc/powernv: Handle compound PE powerpc/powernv: Split ioda_eeh_get_state() powerpc/powernv: Allow to freeze PE powerpc/powernv: Enable M64 aperatus for PHB3 powerpc/eeh: Aux PE data for error log ...
T2080PCIe-RDB is a Freescale Reference Design Board that hosts T2080 SoC. The board feature overview: Processor: - T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz DDR Memory: - Single memory controller capable of supporting DDR3 and DDR3-LP devices - 72bit 4GB DDR3-LP SODIMM in slot Ethernet interfaces: - Two 1Gbps RGMII ports on-board - Two 10Gbps SFP+ ports on-board - Two 10Gbps Base-T ports on-board Accelerator: - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC IFC/Local Bus - NOR: 128MB 16-bit NOR flash - NAND: 1GB 8-bit NAND flash - CPLD: for system controlling with programable header on-board eSPI: - 64MB N25Q512 SPI flash USB: - Two USB2.0 ports with internal PHY (both Type-A) PCIe: - One PCIe x4 goldfinger(support SR-IOV) - One PCIe x4 slot - One PCIe x2 end-point device (C293 crypto co-processor) SATA: - Two SATA 2.0 ports on-board SDHC: - support a MicroSD/TF card on-board I2C: - Four I2C controllers. UART: - Dual 4-pins UART serial ports Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
Register the controller for device tree based lookup of DMA channels (non-fatal for backwards compatibility with older device trees) and provide the '#dma-cells' property in the shared mpc5121.dtsi file Signed-off-by: Alexander Popov <a13xp0p0v88@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>