linux.git/arch/powerpc/configs, branch v3.13.6

powerpc/52xx: Re-enable bestcomm driver in defconfigs

2013-12-10T00:25:08+00:00

The bestcomm driver has been moved to drivers/dma, so to select
this driver by default additionally CONFIG_DMADEVICES has to be
enabled. Currently it is not enabled in the config despite existing
CONFIG_PPC_BESTCOMM=y in the config files. Fix it.

Signed-off-by: Anatolij Gustschin 
Signed-off-by: Benjamin Herrenschmidt

powerpc/pasemi: Turn on devtmpfs in defconfig

2013-12-10T00:25:08+00:00

At least some distros expect it these days; turn it on. Also, random
churn from doing a savedefconfig for the first time in a year or so.

Signed-off-by: Olof Johansson 
Signed-off-by: Benjamin Herrenschmidt

powerpc: Add pseries_le_defconfig

2013-11-20T22:19:23+00:00

Signed-off-by: Anton Blanchard 
Signed-off-by: Benjamin Herrenschmidt

powerpc: Enable virtio on ppc64 and pseries configs

2013-10-30T05:02:09+00:00

Signed-off-by: Anton Blanchard 
Signed-off-by: Benjamin Herrenschmidt

powerpc: Enable multipath modules on ppc64 and pseries

2013-10-30T05:02:03+00:00

Enable a few modules required to boot on a POWER multipath
box.

Signed-off-by: Anton Blanchard 
Signed-off-by: Benjamin Herrenschmidt

powerpc: sync ppc64, ppc64e and pseries configs

2013-10-30T05:01:56+00:00

Run savedefconfig over the ppc64, ppc64e and pseries config

Signed-off-by: Anton Blanchard 
Signed-off-by: Benjamin Herrenschmidt

powerpc/6xx: CONFIG_MCU_MPC8349EMITX cannot be a module

2013-10-29T02:11:24+00:00

During "make ppc6xx_defconfig" the following happens:

  HOSTCC  scripts/basic/fixdep
  GEN     /usr/local/src/tmp/lnx/Makefile
  HOSTCC  scripts/kconfig/conf.o
  HOSTCC  scripts/kconfig/zconf.tab.o
  HOSTLD  scripts/kconfig/conf
arch/powerpc/configs/ppc6xx_defconfig:74:warning: symbol value 'm' invalid for MCU_MPC8349EMITX

Setting CONFIG_MCU_MPC8349EMITX=y in ppc6xx_defconfig makes the warning
go away. This too has been reported by Geert Uytterhoeven a long time ago:
https://lkml.org/lkml/2011/11/13/11  - I only came across this because I
needed a "clean" defconfig for this Powerbook G5.

Signed-off-by: Christian Kujau 
[scottwood@freescale.com: cleaned up commit message slightly]
Signed-off-by: Scott Wood

powerpc/85xx: use one kernel option for all the CoreNet_Generic boards

2013-10-29T02:11:21+00:00

Currently all these boards use the same machine struct and also select
the same kernel options, so it seems a bit of redundant to keep one
separate kernel option for each board. Also update the defconfigs
according to this change.

Signed-off-by: Kevin Hao 
Signed-off-by: Scott Wood

powerpc/fsl/defconfig: enable CONFIG_AT803X_PHY

2013-10-29T02:11:17+00:00

Enable CONFIG_AT803X_PHY to support AR8030/8033/8035 PHY.

Signed-off-by: Shengzhou Liu 
Signed-off-by: Scott Wood

powerpc/85xx: Add C293PCIE board support

2013-08-24T00:43:24+00:00

C293PCIE board is a series of Freescale PCIe add-in cards to perform
as public key crypto accelerator or secure key management module.

 - 512KB platform SRAM in addition to 512K L2 Cache/SRAM
 - 512MB soldered DDR3 32bit memory
 - CPLD System Logic
 - 64MB x16 NOR flash and 4GB x8 NAND flash
 - 16MB SPI flash

Signed-off-by: Mingkai Hu 
Signed-off-by: Po Liu 
Signed-off-by: Scott Wood