Fixes the following Coccinelle/coccicheck warning reported by
string_choices.cocci:

	opportunity for str_plural(tpc)

Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240331222249.107467-2-thorsten.blum@toblux.com

Remove CONFIG_CRASH_DUMP dependency on CONFIG_KEXEC. CONFIG_KEXEC_CORE
was used at places where CONFIG_CRASH_DUMP or CONFIG_CRASH_RESERVE was
appropriate. Replace with appropriate #ifdefs to support CONFIG_KEXEC
and !CONFIG_CRASH_DUMP configuration option. Also, make CONFIG_FA_DUMP
dependent on CONFIG_CRASH_DUMP to avoid unmet dependencies for FA_DUMP
with !CONFIG_KEXEC_CORE configuration option.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240226103010.589537-4-hbathini@linux.ibm.com

Pull powerpc updates from Michael Ellerman:

 - Add AT_HWCAP3 and AT_HWCAP4 aux vector entries for future use
   by glibc

 - Add support for recognising the Power11 architected and raw PVRs

 - Add support for nr_cpus=n on the command line where the
   boot CPU is >= n

 - Add ppcxx_allmodconfig targets for all 32-bit sub-arches

 - Other small features, cleanups and fixes

Thanks to Akanksha J N, Brian King, Christophe Leroy, Dawei Li, Geoff
Levand, Greg Kroah-Hartman, Jan-Benedict Glaw, Kajol Jain, Kunwu Chan,
Li zeming, Madhavan Srinivasan, Masahiro Yamada, Nathan Chancellor,
Nicholas Piggin, Peter Bergner, Qiheng Lin, Randy Dunlap, Ricardo B.
Marliere, Rob Herring, Sathvika Vasireddy, Shrikanth Hegde, Uwe
Kleine-König, Vaibhav Jain, and Wen Xiong.

* tag 'powerpc-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (71 commits)
  powerpc/macio: Make remove callback of macio driver void returned
  powerpc/83xx: Fix build failure with FPU=n
  powerpc/64s: Fix get_hugepd_cache_index() build failure
  powerpc/4xx: Fix warp_gpio_leds build failure
  powerpc/amigaone: Make several functions static
  powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc.
  macintosh/adb: make adb_dev_class constant
  powerpc: xor_vmx: Add '-mhard-float' to CFLAGS
  powerpc/fsl: Fix mfpmr() asm constraint error
  powerpc: Remove cpu-as-y completely
  powerpc/fsl: Modernise mt/mfpmr
  powerpc/fsl: Fix mfpmr build errors with newer binutils
  powerpc/64s: Use .machine power4 around dcbt
  powerpc/64s: Move dcbt/dcbtst sequence into a macro
  powerpc/mm: Code cleanup for __hash_page_thp
  powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks
  powerpc/irq: Allow softirq to hardirq stack transition
  powerpc: Stop using of_root
  powerpc/machdep: Define 'compatibles' property in ppc_md and use it
  of: Reimplement of_machine_is_compatible() using of_machine_compatible_match()
  ...

Most probe functions that do not use the 'compatible' string do
nothing else than checking whether the machine is compatible with
one of the strings in a NULL terminated table of strings.

Define that table of strings in ppc_md structure and check it directly
from probe_machine() instead of using ppc_md.probe() for that.

Keep checking in ppc_md.probe() only for more complex probing.

All .compatible could be replaced with a single element NULL
terminated list but that's not worth the churn. Can be do incrementaly
in follow-up patches.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231214103152.12269-4-mpe@ellerman.id.au

Now move the relevant codes into separate files:
kernel/crash_reserve.c, include/linux/crash_reserve.h.

And add config item CRASH_RESERVE to control its enabling.

And also update the old ifdeffery of CONFIG_CRASH_CORE, including of
<linux/crash_core.h> and config item dependency on CRASH_CORE
accordingly.

And also do renaming as follows:
 - arch/xxx/kernel/{crash_core.c => vmcore_info.c}
because they are only related to vmcoreinfo exporting on x86, arm64,
riscv.

And also Remove config item CRASH_CORE, and rely on CONFIG_KEXEC_CORE to
decide if build in crash_core.c.

[yang.lee@linux.alibaba.com: remove duplicated include in vmcore_info.c]
  Link: https://lkml.kernel.org/r/20240126005744.16561-1-yang.lee@linux.alibaba.com
Link: https://lkml.kernel.org/r/20240124051254.67105-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If nr_cpu_ids is too low to include the boot CPU, remap the boot CPU
onto logical core 0.

This is achieved in two stages. In early_init_dt_scan_cpus() the boot
CPU is renumbered to be on logical core 0, and the original boot core's
hardware ID is recorded.

Later in smp_setup_cpu_maps(), if the original boot core ID is set, the
logical CPU numbers on the 0th core are skipped in the normal device
tree search over CPU device tree nodes. Then the search is continued
until the device tree node matching the boot core is found, and those
CPUs are assigned the CPU numbers starting at 0.

This allows kdump kernels to be booted with low values for nr_cpu_ids
to conserve memory, while also allowing the crashing/boot CPU to be
any CPU.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Wen Xiong <wenxiong@us.ibm.com>
Link: https://msgid.link/20231229120107.2281153-5-mpe@ellerman.id.au

Factor out the for loop that assigns CPU numbers to threads of a core.
The function takes the next CPU number to use as input, and returns the
next available CPU number after the threads has been assigned.

This will allow a subsequent change to assign threads out of order.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231229120107.2281153-4-mpe@ellerman.id.au

The of_device_is_available() check only needs to be done once per device
node, there's no need to repeat it for each thread. Move it out of the
loop.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231229120107.2281153-3-mpe@ellerman.id.au

Pull tty and serial updates from Greg KH:
 "Here is the big set of tty/serial driver changes for 6.7-rc1. Included
  in here are:

   - console/vgacon cleanups and removals from Arnd

   - tty core and n_tty cleanups from Jiri

   - lots of 8250 driver updates and cleanups

   - sc16is7xx serial driver updates

   - dt binding updates

   - first set of port lock wrapers from Thomas for the printk fixes
     coming in future releases

   - other small serial and tty core cleanups and updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
  serdev: Replace custom code with device_match_acpi_handle()
  serdev: Simplify devm_serdev_device_open() function
  serdev: Make use of device_set_node()
  tty: n_gsm: add copyright Siemens Mobility GmbH
  tty: n_gsm: fix race condition in status line change on dead connections
  serial: core: Fix runtime PM handling for pending tx
  vgacon: fix mips/sibyte build regression
  dt-bindings: serial: drop unsupported samsung bindings
  tty: serial: samsung: drop earlycon support for unsupported platforms
  tty: 8250: Add note for PX-835
  tty: 8250: Fix IS-200 PCI ID comment
  tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
  tty: 8250: Add support for Intashield IX cards
  tty: 8250: Add support for additional Brainboxes PX cards
  tty: 8250: Fix up PX-803/PX-857
  tty: 8250: Fix port count of PX-257
  tty: 8250: Add support for Intashield IS-100
  tty: 8250: Add support for Brainboxes UP cards
  tty: 8250: Add support for additional Brainboxes UC cards
  tty: 8250: Remove UC-257 and UC-431
  ...

Pull tracing updates from Steven Rostedt:

 - Remove eventfs_file descriptor

   This is the biggest change, and the second part of making eventfs
   create its files dynamically.

   In 6.6 the first part was added, and that maintained a one to one
   mapping between eventfs meta descriptors and the directories and file
   inodes and dentries that were dynamically created. The directories
   were represented by a eventfs_inode and the files were represented by
   a eventfs_file.

   In v6.7 the eventfs_file is removed. As all events have the same
   directory make up (sched_switch has an "enable", "id", "format", etc
   files), the handing of what files are underneath each leaf eventfs
   directory is moved back to the tracing subsystem via a callback.

   When an event is added to the eventfs, it registers an array of
   evenfs_entry's. These hold the names of the files and the callbacks
   to call when the file is referenced. The callback gets the name so
   that the same callback may be used by multiple files. The callback
   then supplies the filesystem_operations structure needed to create
   this file.

   This has brought the memory footprint of creating multiple eventfs
   instances down by 2 megs each!

 - User events now has persistent events that are not associated to a
   single processes. These are privileged events that hang around even
   if no process is attached to them

 - Clean up of seq_buf

   There's talk about using seq_buf more to replace strscpy() and
   friends. But this also requires some minor modifications of seq_buf
   to be able to do this

 - Expand instance ring buffers individually

   Currently if boot up creates an instance, and a trace event is
   enabled on that instance, the ring buffer for that instance and the
   top level ring buffer are expanded (1.4 MB per CPU). This wastes
   memory as this happens when nothing is using the top level instance

 - Other minor clean ups and fixes

* tag 'trace-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (34 commits)
  seq_buf: Export seq_buf_puts()
  seq_buf: Export seq_buf_putc()
  eventfs: Use simple_recursive_removal() to clean up dentries
  eventfs: Remove special processing of dput() of events directory
  eventfs: Delete eventfs_inode when the last dentry is freed
  eventfs: Hold eventfs_mutex when calling callback functions
  eventfs: Save ownership and mode
  eventfs: Test for ei->is_freed when accessing ei->dentry
  eventfs: Have a free_ei() that just frees the eventfs_inode
  eventfs: Remove "is_freed" union with rcu head
  eventfs: Fix kerneldoc of eventfs_remove_rec()
  tracing: Have the user copy of synthetic event address use correct context
  eventfs: Remove extra dget() in eventfs_create_events_dir()
  tracing: Have trace_event_file have ref counters
  seq_buf: Introduce DECLARE_SEQ_BUF and seq_buf_str()
  eventfs: Fix typo in eventfs_inode union comment
  eventfs: Fix WARN_ON() in create_file_dentry()
  powerpc: Remove initialisation of readpos
  tracing/histograms: Simplify last_cmd_set()
  seq_buf: fix a misleading comment
  ...