When trying to flash a machine via the update_flash command, Anton received the
following error:

    Restarting system.
    FLASH: kernel bug...flash list header addr above 4GB

The code in question has a comment that the flash list should be in
the kernel data and therefore under 4GB:

        /* NOTE: the "first" block list is a global var with no data
         * blocks in the kernel data segment.  We do this because
         * we want to ensure this block_list addr is under 4GB.
         */

Unfortunately the Kconfig option is marked tristate which means the variable
may not be in the kernel data and could be above 4GB.

Instead of relying on the data segment being below 4GB, use the static
data buffer allocated by the kernel for use by rtas.  Since we don't
use the header struct directly anymore, convert it to a simple pointer.

Reported-By: Anton Blanchard <anton@samba.org>
Signed-Off-By: Milton Miller <miltonm@bga.com
Tested-By: Anton Blanchard <anton@samba.org>

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Irq stacks provide an essential protection from stack overflows through
external interrupts, at the cost of two additionals stacks per CPU.

Enable them unconditionally to simplify the kernel build and prevent
people from accidentally disabling them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

kexec_perpare_cpus_wait() iterates i through NR_CPUS to check
paca[i].kexec_state of each to make sure they have quiesced.
However now we have dynamic PACA allocation, paca[NR_CPUS] is not necessarily
valid and we overrun the array;  spurious "cpu is not possible, ignoring"
errors result.  This patch iterates for_each_online_cpu so stays
within the bounds of paca[] -- and every CPU is now 'possible'.

Signed-off-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: clear bridge resource range if BIOS assigned bad one
  PCI: hotplug/cpqphp, fix NULL dereference
  Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/"
  PCI: change resource collision messages from KERN_ERR to KERN_INFO

Yannick found that video does not work with 2.6.34.  The cause of this
bug was that the BIOS had assigned the wrong range to the PCI bridge
above the video device.  Before 2.6.34 the kernel would have shrunk
the size of the bridge window, but since
  d65245c PCI: don't shrink bridge resources
the kernel will avoid shrinking BIOS ranges.

So zero out the old range if we fail to claim it at boot time; this will
cause us to allocate a new range at startup, restoring the 2.6.34
behavior.

Fixes regression https://bugzilla.kernel.org/show_bug.cgi?id=16009.

Reported-by: Yannick <yannick.roehlly@free.fr>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

emulate_step() in kprobe_handler() would've already determined if the
probed instruction can be emulated. We single-step in hardware only if
the instruction couldn't be emulated. resume_execution() therefore is
superfluous -- all we need is to fix up the instruction pointer after
single-stepping.

Thanks to Paul Mackerras for catching this.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Don't export cvt_fd & _df when CONFIG_PPC_FPU is not set
  powerpc/44x: icon: select SM502 and frame buffer console support
  powerpc/85xx: Add P1021MDS board support
  powerpc/85xx: Change MPC8572DS camp dtses for MSI sharing
  powerpc/fsl_msi: add removal path and probe failing path
  powerpc/fsl_msi: enable msi sharing through AMP OSes
  powerpc/fsl_msi: enable msi allocation in all banks
  powerpc/fsl_msi: fix the conflict of virt_msir's chip_data
  powerpc/fsl_msi: Add multiple MSI bank support
  powerpc/kexec: Add support for FSL-BookE
  powerpc/fsl-booke: Move the entry setup code into a seperate file
  powerpc/fsl-booke: fix the case where we are not in the first page
  powerpc/85xx: Enable support for ports 3 and 4 on 8548 CDS
  powerpc/fsl-booke: Add hibernation support for FSL BookE processors
  powerpc/e500mc: Implement machine check handler.
  powerpc/44x: Add basic ICON PPC440SPe board support
  powerpc/44x: Fix UART clocks on 440SPe
  powerpc/44x: Add reset-type to katmai.dts
  powerpc/44x: Adding PCI-E support for PowerPC 460SX based SOC.

* 'for-35' of git://repo.or.cz/linux-kbuild: (81 commits)
  kbuild: Revert part of e8d400a to resolve a conflict
  kbuild: Fix checking of scm-identifier variable
  gconfig: add support to show hidden options that have prompts
  menuconfig: add support to show hidden options which have prompts
  gconfig: remove show_debug option
  gconfig: remove dbg_print_ptype() and dbg_print_stype()
  kconfig: fix zconfdump()
  kconfig: some small fixes
  add random binaries to .gitignore
  kbuild: Include gen_initramfs_list.sh and the file list in the .d file
  kconfig: recalc symbol value before showing search results
  .gitignore: ignore *.lzo files
  headerdep: perlcritic warning
  scripts/Makefile.lib: Align the output of LZO
  kbuild: Generate modules.builtin in make modules_install
  Revert "kbuild: specify absolute paths for cscope"
  kbuild: Do not unnecessarily regenerate modules.builtin
  headers_install: use local file handles
  headers_check: fix perl warnings
  export_report: fix perl warnings
  ...

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Conflicts:
	arch/powerpc/sysdev/fsl_msi.c