linux.git/arch/powerpc/sysdev/fsl_pci.c, branch v4.4.24

Merge tag 'powerpc-4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2015-11-06T07:38:43+00:00

Pull powerpc updates from Michael Ellerman:

 - Kconfig: remove BE-only platforms from LE kernel build from Boqun
   Feng
 - Refresh ps3_defconfig from Geoff Levand
 - Emit GNU & SysV hashes for the vdso from Michael Ellerman
 - Define an enum for the bolted SLB indexes from Anshuman Khandual
 - Use a local to avoid multiple calls to get_slb_shadow() from Michael
   Ellerman
 - Add gettimeofday() benchmark from Michael Neuling
 - Avoid link stack corruption in __get_datapage() from Michael Neuling
 - Add virt_to_pfn and use this instead of opencoding from Aneesh Kumar
   K.V
 - Add ppc64le_defconfig from Michael Ellerman
 - pseries: extract of_helpers module from Andy Shevchenko
 - Correct string length in pseries_of_derive_parent() from Nathan
   Fontenot
 - Free the MSI bitmap if it was slab allocated from Denis Kirjanov
 - Shorten irq_chip name for the SIU from Christophe Leroy
 - Wait 1s for secondaries to enter OPAL during kexec from Samuel
   Mendoza-Jonas
 - Fix _ALIGN_* errors due to type difference, from Aneesh Kumar K.V
 - powerpc/pseries/hvcserver: don't memset pi_buff if it is null from
   Colin Ian King
 - Disable hugepd for 64K page size, from Aneesh Kumar K.V
 - Differentiate between hugetlb and THP during page walk from Aneesh
   Kumar K.V
 - Make PCI non-optional for pseries from Michael Ellerman
 - Individual System V IPC system calls from Sam bobroff
 - Add selftest of unmuxed IPC calls from Michael Ellerman
 - discard .exit.data at runtime from Stephen Rothwell
 - Delete old orphaned PrPMC 280/2800 DTS and boot file, from Paul
   Gortmaker
 - Use of_get_next_parent to simplify code from Christophe Jaillet
 - Paginate some xmon output from Sam bobroff
 - Add some more elements to the xmon PACA dump from Michael Ellerman
 - Allow the tm-syscall selftest to build with old headers from Michael
   Ellerman
 - Run EBB selftests only on POWER8 from Denis Kirjanov
 - Drop CONFIG_TUNE_CELL in favour of CONFIG_CELL_CPU from Michael
   Ellerman
 - Avoid reference to potentially freed memory in prom.c from Christophe
   Jaillet
 - Quieten boot wrapper output with run_cmd from Geoff Levand
 - EEH fixes and cleanups from Gavin Shan
 - Fix recursive fenced PHB on Broadcom shiner adapter from Gavin Shan
 - Use of_get_next_parent() in of_get_ibm_chip_id() from Michael
   Ellerman
 - Fix section mismatch warning in msi_bitmap_alloc() from Denis
   Kirjanov
 - Fix ps3-lpm white space from Rudhresh Kumar J
 - Fix ps3-vuart null dereference from Colin King
 - nvram: Add missing kfree in error path from Christophe Jaillet
 - nvram: Fix function name in some errors messages, from Christophe
   Jaillet
 - drivers/macintosh: adb: fix misleading Kconfig help text from Aaro
   Koskinen
 - agp/uninorth: fix a memleak in create_gatt_table from Denis Kirjanov
 - cxl: Free virtual PHB when removing from Andrew Donnellan
 - scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target from
   Michael Ellerman
 - scripts/kconfig/Makefile: Fix KBUILD_DEFCONFIG check when building
   with O= from Michael Ellerman
 - Freescale updates from Scott: Highlights include 64-bit book3e
   kexec/kdump support, a rework of the qoriq clock driver, device tree
   changes including qoriq fman nodes, support for a new 85xx board, and
   some fixes.
 - MPC5xxx updates from Anatolij: Highlights include a driver for
   MPC512x LocalPlus Bus FIFO with its device tree binding
   documentation, mpc512x device tree updates and some minor fixes.

* tag 'powerpc-4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (106 commits)
  powerpc/msi: Fix section mismatch warning in msi_bitmap_alloc()
  powerpc/prom: Use of_get_next_parent() in of_get_ibm_chip_id()
  powerpc/pseries: Correct string length in pseries_of_derive_parent()
  powerpc/e6500: hw tablewalk: make sure we invalidate and write to the same tlb entry
  powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the SoC device tree(s)
  powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan
  powerpc/fsl: Add #clock-cells and clockgen label to clockgen nodes
  powerpc: handle error case in cpm_muram_alloc()
  powerpc: mpic: use IRQCHIP_SKIP_SET_WAKE instead of redundant mpic_irq_set_wake
  powerpc/book3e-64: Enable kexec
  powerpc/book3e-64/kexec: Set "r4 = 0" when entering spinloop
  powerpc/booke: Only use VIRT_PHYS_OFFSET on booke32
  powerpc/book3e-64/kexec: Enable SMP release
  powerpc/book3e-64/kexec: create an identity TLB mapping
  powerpc/book3e-64: Don't limit paca to 256 MiB
  powerpc/book3e/kdump: Enable crash_kexec_wait_realmode
  powerpc/book3e: support CONFIG_RELOCATABLE
  powerpc/booke64: Fix args to copy_and_flush
  powerpc/book3e-64: rename interrupt_end_book3e with __end_interrupts
  powerpc/e6500: kexec: Handle hardware threads
  ...

uaccess: reimplement probe_kernel_address() using probe_kernel_read()

2015-11-06T03:34:48+00:00

probe_kernel_address() is basically the same as the (later added)
probe_kernel_read().

The return value on EFAULT is a bit different: probe_kernel_address()
returns number-of-bytes-not-copied whereas probe_kernel_read() returns
-EFAULT.  All callers have been checked, none cared.

probe_kernel_read() can be overridden by the architecture whereas
probe_kernel_address() cannot.  parisc, blackfin and um do this, to insert
additional checking.  Hence this patch possibly fixes obscure bugs,
although there are only two probe_kernel_address() callsites outside
arch/.

My first attempt involved removing probe_kernel_address() entirely and
converting all callsites to use probe_kernel_read() directly, but that got
tiresome.

This patch shrinks mm/slab_common.o by 218 bytes.  For a single
probe_kernel_address() callsite.

Cc: Steven Miao 
Cc: Jeff Dike 
Cc: Richard Weinberger 
Cc: "James E.J. Bottomley" 
Cc: Helge Deller 
Cc: Ingo Molnar 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

powerpc/fsl_pci: Don't set up inbound windows in kdump crash kernel

2015-10-17T05:36:37+00:00

Otherwise, because the top end of the crash kernel is treated as the
absolute top of memory rather than the beginning of a reserved region,
in-flight DMA from the previous kernel that targets areas above the
crash kernel can trigger a storm of PCI errors.  We only do this for
kdump, not normal kexec, in case kexec is being used to upgrade to a
kernel that wants a different inbound memory map.

Signed-off-by: Scott Wood 
Cc: Mingkai Hu

powerpc/fsl_pci: Check for get_user/probe_kernel_address failure

2015-10-17T05:35:41+00:00

Signed-off-by: Scott Wood 
Reported-by: Andrew Morton 
Cc: Andrew Morton 
Cc: Benjamin Herrenschmidt 
Cc: Hongtao Jia

treewide: Fix typo in printk

2015-08-07T11:58:05+00:00

This patch fix spelling typo inv various part of sources.

Signed-off-by: Masanari Iida 
Acked-by: Randy Dunlap 
Signed-off-by: Jiri Kosina

powerpc: fsl_pci, swiotlb: Move controller ops from ppc_md to controller_ops

2015-04-11T10:49:17+00:00

Move the installation of DMA operations out of swiotlb's subsys
initcall, and into the generic PCI controller operations struct.

These ops are installed conditionally, based on the ppc_swiotlb_enable
global. The global can be set in two places:
 - swiotlb_detect_4g, which is always called at the arch initcall level
 - setup_pci_atmu, which is called as part of the fsl_add_bridge and
fsl_pci_syscore_do_resume.

fsl_pci_syscore_do_resume is called late enough that any changes as a
result of that call will have no effect.

As such, if we test the global and set the operations as part of
fsl_add_bridge, after the call to setup_pci_atmu, we can be confident
that it will cover all the PCI implementations affected by the changes
to dma-swiotlb.c.

Signed-off-by: Daniel Axtens 
Acked-by: Scott Wood 
Signed-off-by: Michael Ellerman

Merge tag 'powerpc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

2015-02-12T02:15:38+00:00

Pull powerpc updates from Michael Ellerman:

 - Update of all defconfigs

 - Addition of a bunch of config options to modernise our defconfigs

 - Some PS3 updates from Geoff

 - Optimised memcmp for 64 bit from Anton

 - Fix for kprobes that allows 'perf probe' to work from Naveen

 - Several cxl updates from Ian & Ryan

 - Expanded support for the '24x7' PMU from Cody & Sukadev

 - Freescale updates from Scott:
    "Highlights include 8xx optimizations, some more work on datapath
     device tree content, e300 machine check support, t1040 corenet
     error reporting, and various cleanups and fixes"

* tag 'powerpc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (102 commits)
  cxl: Add missing return statement after handling AFU errror
  cxl: Fail AFU initialisation if an invalid configuration record is found
  cxl: Export optional AFU configuration record in sysfs
  powerpc/mm: Warn on flushing tlb page in kernel context
  powerpc/powernv: Add OPAL soft-poweroff routine
  powerpc/perf/hv-24x7: Document sysfs event description entries
  powerpc/perf/hv-gpci: add the remaining gpci requests
  powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated
  powerpc/perf/hv-24x7: parse catalog and populate sysfs with events
  perf: define EVENT_DEFINE_RANGE_FORMAT_LITE helper
  perf: add PMU_EVENT_ATTR_STRING() helper
  perf: provide sysfs_show for struct perf_pmu_events_attr
  powerpc/kernel: Avoid initializing device-tree pointer twice
  powerpc: Remove old compile time disabled syscall tracing code
  powerpc/kernel: Make syscall_exit a local label
  cxl: Fix device_node reference counting
  powerpc/mm: bail out early when flushing TLB page
  powerpc: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)
  perf/powerpc: reset event hw state when adding it to the PMU
  powerpc/qe: Use strlcpy()
  ...

powerpc/fsl_pci: Convert PCI to use generic config accessors

2015-01-30T22:14:43+00:00

Convert the fsl_pci driver to use the generic config access functions.

This changes accesses from (in|out)_(8|le16|le32) to readX/writeX variants.
I believe these should be equivalent for PCI config space accesses, but
confirmation would be nice.

Signed-off-by: Rob Herring 
Signed-off-by: Bjorn Helgaas 
CC: Benjamin Herrenschmidt 
CC: Paul Mackerras 
CC: Michael Ellerman 
CC: linuxppc-dev@lists.ozlabs.org

powerpc/fsl_pci: Fix pci stack build bug with FRAME_WARN

2015-01-30T01:56:15+00:00

Fix this:

  CC      arch/powerpc/sysdev/fsl_pci.o
arch/powerpc/sysdev/fsl_pci.c: In function 'fsl_pcie_check_link':
arch/powerpc/sysdev/fsl_pci.c:91:1: error: the frame size of 1360 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

when configuring FRAME_WARN, by refactoring indirect_read_config()
to take hose and bus number instead of the 1344-byte struct pci_bus.

Signed-off-by: Kim Phillips 
Signed-off-by: Scott Wood

powerpc: Remove more traces of bootmem

2014-11-19T10:41:51+00:00

Although we are now selecting NO_BOOTMEM, we still have some traces of
bootmem lying around. That is because even with NO_BOOTMEM there is
still a shim that converts bootmem calls into memblock calls, but
ultimately we want to remove all traces of bootmem.

Most of the patch is conversions from alloc_bootmem() to
memblock_virt_alloc(). In general a call such as:

  p = (struct foo *)alloc_bootmem(x);

Becomes:

  p = memblock_virt_alloc(x, 0);

We don't need the cast because memblock_virt_alloc() returns a void *.
The alignment value of zero tells memblock to use the default alignment,
which is SMP_CACHE_BYTES, the same value alloc_bootmem() uses.

We remove a number of NULL checks on the result of
memblock_virt_alloc(). That is because memblock_virt_alloc() will panic
if it can't allocate, in exactly the same way as alloc_bootmem(), so the
NULL checks are and always have been redundant.

The memory returned by memblock_virt_alloc() is already zeroed, so we
remove several memsets of the result of memblock_virt_alloc().

Finally we convert a few uses of __alloc_bootmem(x, y, MAX_DMA_ADDRESS)
to just plain memblock_virt_alloc(). We don't use memblock_alloc_base()
because MAX_DMA_ADDRESS is ~0ul on powerpc, so limiting the allocation
to that is pointless, 16XB ought to be enough for anyone.

Signed-off-by: Michael Ellerman