linux.git/arch/powerpc/sysdev/xive/common.c, branch v5.4.301 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git powerpc/xive: Discard disabled interrupts in get_irqchip_state() 2021-10-20T09:40:15+00:00 Cédric Le Goater clg@kaod.org 2021-10-11T07:02:03+00:00 1904050cacd71629fcee2664b962077c551da4a1 commit 6f779e1d359b8d5801f677c1d49dcfa10bf95674 upstream. When an interrupt is passed through, the KVM XIVE device calls the set_vcpu_affinity() handler which raises the P bit to mask the interrupt and to catch any in-flight interrupts while routing the interrupt to the guest. On the guest side, drivers (like some Intels) can request at probe time some MSIs and call synchronize_irq() to check that there are no in flight interrupts. This will call the XIVE get_irqchip_state() handler which will always return true as the interrupt P bit has been set on the host side and lock the CPU in an infinite loop. Fix that by discarding disabled interrupts in get_irqchip_state(). Fixes: da15c03b047d ("powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race") Cc: stable@vger.kernel.org #v5.4+ Signed-off-by: Cédric Le Goater <clg@kaod.org> Tested-by: seeteena <s1seetee@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211011070203.99726-1-clg@kaod.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6f779e1d359b8d5801f677c1d49dcfa10bf95674 upstream.

When an interrupt is passed through, the KVM XIVE device calls the
set_vcpu_affinity() handler which raises the P bit to mask the
interrupt and to catch any in-flight interrupts while routing the
interrupt to the guest.

On the guest side, drivers (like some Intels) can request at probe
time some MSIs and call synchronize_irq() to check that there are no
in flight interrupts. This will call the XIVE get_irqchip_state()
handler which will always return true as the interrupt P bit has been
set on the host side and lock the CPU in an infinite loop.

Fix that by discarding disabled interrupts in get_irqchip_state().

Fixes: da15c03b047d ("powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race")
Cc: stable@vger.kernel.org #v5.4+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: seeteena <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211011070203.99726-1-clg@kaod.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/xive: Fix xmon command "dxi" 2021-05-14T07:44:29+00:00 Cédric Le Goater clg@kaod.org 2021-03-31T14:45:12+00:00 c77bf004717d3f276b4e3eb77d0393d8ca2bf7a8 [ Upstream commit 33e4bc5946432a4ac173fd08e8e30a13ab94d06d ] When under xmon, the "dxi" command dumps the state of the XIVE interrupts. If an interrupt number is specified, only the state of the associated XIVE interrupt is dumped. This form of the command lacks an irq_data parameter which is nevertheless used by xmon_xive_get_irq_config(), leading to an xmon crash. Fix that by doing a lookup in the system IRQ mapping to query the IRQ descriptor data. Invalid interrupt numbers, or not belonging to the XIVE IRQ domain, OPAL event interrupt number for instance, should be caught by the previous query done at the firmware level. Fixes: 97ef27507793 ("powerpc/xive: Fix xmon support on the PowerNV platform") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Tested-by: Greg Kurz <groug@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210331144514.892250-8-clg@kaod.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 33e4bc5946432a4ac173fd08e8e30a13ab94d06d ]

When under xmon, the "dxi" command dumps the state of the XIVE
interrupts. If an interrupt number is specified, only the state of
the associated XIVE interrupt is dumped. This form of the command
lacks an irq_data parameter which is nevertheless used by
xmon_xive_get_irq_config(), leading to an xmon crash.

Fix that by doing a lookup in the system IRQ mapping to query the IRQ
descriptor data. Invalid interrupt numbers, or not belonging to the
XIVE IRQ domain, OPAL event interrupt number for instance, should be
caught by the previous query done at the firmware level.

Fixes: 97ef27507793 ("powerpc/xive: Fix xmon support on the PowerNV platform")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-8-clg@kaod.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/xive: Clear the page tables for the ESB IO mapping 2020-06-17T14:40:22+00:00 Cédric Le Goater clg@kaod.org 2020-04-29T07:51:20+00:00 eb6315063043799b92bee33afb3ade7ee8902065 [ Upstream commit a101950fcb78b0ba20cd487be6627dea58d55c2b ] Commit 1ca3dec2b2df ("powerpc/xive: Prevent page fault issues in the machine crash handler") fixed an issue in the FW assisted dump of machines using hash MMU and the XIVE interrupt mode under the POWER hypervisor. It forced the mapping of the ESB page of interrupts being mapped in the Linux IRQ number space to make sure the 'crash kexec' sequence worked during such an event. But it didn't handle the un-mapping. This mapping is now blocking the removal of a passthrough IO adapter under the POWER hypervisor because it expects the guest OS to have cleared all page table entries related to the adapter. If some are still present, the RTAS call which isolates the PCI slot returns error 9001 "valid outstanding translations". Remove these mapping in the IRQ data cleanup routine. Under KVM, this cleanup is not required because the ESB pages for the adapter interrupts are un-mapped from the guest by the hypervisor in the KVM XIVE native device. This is now redundant but it's harmless. Fixes: 1ca3dec2b2df ("powerpc/xive: Prevent page fault issues in the machine crash handler") Cc: stable@vger.kernel.org # v5.5+ Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200429075122.1216388-2-clg@kaod.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a101950fcb78b0ba20cd487be6627dea58d55c2b ]

Commit 1ca3dec2b2df ("powerpc/xive: Prevent page fault issues in the
machine crash handler") fixed an issue in the FW assisted dump of
machines using hash MMU and the XIVE interrupt mode under the POWER
hypervisor. It forced the mapping of the ESB page of interrupts being
mapped in the Linux IRQ number space to make sure the 'crash kexec'
sequence worked during such an event. But it didn't handle the
un-mapping.

This mapping is now blocking the removal of a passthrough IO adapter
under the POWER hypervisor because it expects the guest OS to have
cleared all page table entries related to the adapter. If some are
still present, the RTAS call which isolates the PCI slot returns error
9001 "valid outstanding translations".

Remove these mapping in the IRQ data cleanup routine.

Under KVM, this cleanup is not required because the ESB pages for the
adapter interrupts are un-mapped from the guest by the hypervisor in
the KVM XIVE native device. This is now redundant but it's harmless.

Fixes: 1ca3dec2b2df ("powerpc/xive: Prevent page fault issues in the machine crash handler")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200429075122.1216388-2-clg@kaod.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/xive: Fix xmon support on the PowerNV platform 2020-04-17T08:50:23+00:00 Cédric Le Goater clg@kaod.org 2020-03-06T15:01:41+00:00 ed6f6b2b39afa6ce2d73f9241808aed211e2b347 commit 97ef275077932c65b1b8ec5022abd737a9fbf3e0 upstream. The PowerNV platform has multiple IRQ chips and the xmon command dumping the state of the XIVE interrupt should only operate on the XIVE IRQ chip. Fixes: 5896163f7f91 ("powerpc/xmon: Improve output of XIVE interrupts") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200306150143.5551-3-clg@kaod.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 97ef275077932c65b1b8ec5022abd737a9fbf3e0 upstream.

The PowerNV platform has multiple IRQ chips and the xmon command
dumping the state of the XIVE interrupt should only operate on the
XIVE IRQ chip.

Fixes: 5896163f7f91 ("powerpc/xmon: Improve output of XIVE interrupts")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200306150143.5551-3-clg@kaod.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/xive: Use XIVE_BAD_IRQ instead of zero to catch non configured IPIs 2020-04-17T08:50:22+00:00 Cédric Le Goater clg@kaod.org 2020-03-06T15:01:40+00:00 9240f83aa9c7736576a40f69c5aa7560bbd9c7ae commit b1a504a6500df50e83b701b7946b34fce27ad8a3 upstream. When a CPU is brought up, an IPI number is allocated and recorded under the XIVE CPU structure. Invalid IPI numbers are tracked with interrupt number 0x0. On the PowerNV platform, the interrupt number space starts at 0x10 and this works fine. However, on the sPAPR platform, it is possible to allocate the interrupt number 0x0 and this raises an issue when CPU 0 is unplugged. The XIVE spapr driver tracks allocated interrupt numbers in a bitmask and it is not correctly updated when interrupt number 0x0 is freed. It stays allocated and it is then impossible to reallocate. Fix by using the XIVE_BAD_IRQ value instead of zero on both platforms. Reported-by: David Gibson <david@gibson.dropbear.id.au> Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200306150143.5551-2-clg@kaod.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b1a504a6500df50e83b701b7946b34fce27ad8a3 upstream.

When a CPU is brought up, an IPI number is allocated and recorded
under the XIVE CPU structure. Invalid IPI numbers are tracked with
interrupt number 0x0.

On the PowerNV platform, the interrupt number space starts at 0x10 and
this works fine. However, on the sPAPR platform, it is possible to
allocate the interrupt number 0x0 and this raises an issue when CPU 0
is unplugged. The XIVE spapr driver tracks allocated interrupt numbers
in a bitmask and it is not correctly updated when interrupt number 0x0
is freed. It stays allocated and it is then impossible to reallocate.

Fix by using the XIVE_BAD_IRQ value instead of zero on both platforms.

Reported-by: David Gibson <david@gibson.dropbear.id.au>
Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200306150143.5551-2-clg@kaod.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/xive: Discard ESB load value when interrupt is invalid 2020-01-29T15:45:26+00:00 Frederic Barrat fbarrat@linux.ibm.com 2020-01-13T13:01:18+00:00 7cf7a7d025879086bd69570398832e00d3613dd5 commit 17328f218fb760c9c6accc5b52494889243a6b98 upstream. A load on an ESB page returning all 1's means that the underlying device has invalidated the access to the PQ state of the interrupt through mmio. It may happen, for example when querying a PHB interrupt while the PHB is in an error state. In that case, we should consider the interrupt to be invalid when checking its state in the irq_get_irqchip_state() handler. Fixes: da15c03b047d ("powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> [clg: wrote a commit log, introduced XIVE_ESB_INVALID ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200113130118.27969-1-clg@kaod.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 17328f218fb760c9c6accc5b52494889243a6b98 upstream.

A load on an ESB page returning all 1's means that the underlying
device has invalidated the access to the PQ state of the interrupt
through mmio. It may happen, for example when querying a PHB interrupt
while the PHB is in an error state.

In that case, we should consider the interrupt to be invalid when
checking its state in the irq_get_irqchip_state() handler.

Fixes: da15c03b047d ("powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
[clg: wrote a commit log, introduced XIVE_ESB_INVALID ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200113130118.27969-1-clg@kaod.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/xive: Prevent page fault issues in the machine crash handler 2019-12-17T18:56:41+00:00 Cédric Le Goater clg@kaod.org 2019-10-31T06:31:00+00:00 e6d76815e9a44774fa57f1d390ede404f1ed75cc commit 1ca3dec2b2dff9d286ce6cd64108bda0e98f9710 upstream. When the machine crash handler is invoked, all interrupts are masked but interrupts which have not been started yet do not have an ESB page mapped in the Linux address space. This crashes the 'crash kexec' sequence on sPAPR guests. To fix, force the mapping of the ESB page when an interrupt is being mapped in the Linux IRQ number space. This is done by setting the initial state of the interrupt to OFF which is not necessarily the case on PowerNV. Fixes: 243e25112d06 ("powerpc/xive: Native exploitation of the XIVE interrupt controller") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191031063100.3864-1-clg@kaod.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1ca3dec2b2dff9d286ce6cd64108bda0e98f9710 upstream.

When the machine crash handler is invoked, all interrupts are masked
but interrupts which have not been started yet do not have an ESB page
mapped in the Linux address space. This crashes the 'crash kexec'
sequence on sPAPR guests.

To fix, force the mapping of the ESB page when an interrupt is being
mapped in the Linux IRQ number space. This is done by setting the
initial state of the interrupt to OFF which is not necessarily the
case on PowerNV.

Fixes: 243e25112d06 ("powerpc/xive: Native exploitation of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031063100.3864-1-clg@kaod.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/xmon: Fix output of XIVE IPI 2019-09-13T14:58:47+00:00 Cédric Le Goater clg@kaod.org 2019-09-10T08:18:50+00:00 855d9140a394229f21fd4fd216f377ed45bd93a3 When dumping the XIVE state of an CPU IPI, xmon does not check if the CPU is started or not which can cause an error. Add a check for that and change the output to be on one line just as the XIVE interrupts of the machine. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190910081850.26038-3-clg@kaod.org 
When dumping the XIVE state of an CPU IPI, xmon does not check if the
CPU is started or not which can cause an error. Add a check for that
and change the output to be on one line just as the XIVE interrupts of
the machine.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190910081850.26038-3-clg@kaod.org
powerpc/xmon: Improve output of XIVE interrupts 2019-09-13T14:58:47+00:00 Cédric Le Goater clg@kaod.org 2019-09-10T08:18:49+00:00 5896163f7f91c0560cc41908c808661eee4c4121 When looping on the list of interrupts, add the current value of the PQ bits with a load on the ESB page. This has the side effect of faulting the ESB page of all interrupts. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190910081850.26038-2-clg@kaod.org 
When looping on the list of interrupts, add the current value of the
PQ bits with a load on the ESB page. This has the side effect of
faulting the ESB page of all interrupts.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190910081850.26038-2-clg@kaod.org
powerpc/xive: Fix dump of XIVE interrupt under pseries 2019-08-19T03:20:24+00:00 Cédric Le Goater clg@kaod.org 2019-08-14T15:47:53+00:00 b4868ff55d082bc66b0c287a41e4888f6d3e5f87 The xmon 'dxi' command calls OPAL to query the XIVE configuration of a interrupt. This can only be done on baremetal (PowerNV) and it will crash a pseries machine. Introduce a new XIVE get_irq_config() operation which implements a different query depending on the platform, PowerNV or pseries, and modify xmon to use a top level wrapper. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190814154754.23682-3-clg@kaod.org 
The xmon 'dxi' command calls OPAL to query the XIVE configuration of a
interrupt. This can only be done on baremetal (PowerNV) and it will
crash a pseries machine.

Introduce a new XIVE get_irq_config() operation which implements a
different query depending on the platform, PowerNV or pseries, and
modify xmon to use a top level wrapper.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190814154754.23682-3-clg@kaod.org