linux.git/arch/powerpc/sysdev, branch v5.4.211 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git powerpc/xive: Fix refcount leak in xive_get_max_prio 2022-08-25T09:18:07+00:00 Miaoqian Lin linmq006@gmail.com 2022-06-05T05:32:23+00:00 d99733ad47a6c990b52e136608455643bfa708f2 [ Upstream commit 255b650cbec6849443ce2e0cdd187fd5e61c218c ] of_find_node_by_path() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220605053225.56125-1-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 255b650cbec6849443ce2e0cdd187fd5e61c218c ]

of_find_node_by_path() returns a node pointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.

Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220605053225.56125-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/fsl-pci: Fix Class Code of PCIe Root Port 2022-08-25T09:17:25+00:00 Pali Rohár pali@kernel.org 2022-07-06T10:10:43+00:00 28a6d14ba60a7aa5f5e6ac1051a361dd8a771207 commit 0c551abfa004ce154d487d91777bf221c808a64f upstream. By default old pre-3.0 Freescale PCIe controllers reports invalid PCI Class Code 0x0b20 for PCIe Root Port. It can be seen by lspci -b output on P2020 board which has this pre-3.0 controller: $ lspci -bvnn 00:00.0 Power PC [0b20]: Freescale Semiconductor Inc P2020E [1957:0070] (rev 21) !!! Invalid class 0b20 for header type 01 Capabilities: [4c] Express Root Port (Slot-), MSI 00 Fix this issue by programming correct PCI Class Code 0x0604 for PCIe Root Port to the Freescale specific PCIe register 0x474. With this change lspci -b output is: $ lspci -bvnn 00:00.0 PCI bridge [0604]: Freescale Semiconductor Inc P2020E [1957:0070] (rev 21) (prog-if 00 [Normal decode]) Capabilities: [4c] Express Root Port (Slot-), MSI 00 Without any "Invalid class" error. So class code was properly reflected into standard (read-only) PCI register 0x08. Same fix is already implemented in U-Boot pcie_fsl.c driver in commit: http://source.denx.de/u-boot/u-boot/-/commit/d18d06ac35229345a0af80977a408cfbe1d1015b Fix activated by U-Boot stay active also after booting Linux kernel. But boards which use older U-Boot version without that fix are affected and still require this fix. So implement this class code fix also in kernel fsl_pci.c driver. Cc: stable@vger.kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220706101043.4867-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0c551abfa004ce154d487d91777bf221c808a64f upstream.

By default old pre-3.0 Freescale PCIe controllers reports invalid PCI Class
Code 0x0b20 for PCIe Root Port. It can be seen by lspci -b output on P2020
board which has this pre-3.0 controller:

  $ lspci -bvnn
  00:00.0 Power PC [0b20]: Freescale Semiconductor Inc P2020E [1957:0070] (rev 21)
          !!! Invalid class 0b20 for header type 01
          Capabilities: [4c] Express Root Port (Slot-), MSI 00

Fix this issue by programming correct PCI Class Code 0x0604 for PCIe Root
Port to the Freescale specific PCIe register 0x474.

With this change lspci -b output is:

  $ lspci -bvnn
  00:00.0 PCI bridge [0604]: Freescale Semiconductor Inc P2020E [1957:0070] (rev 21) (prog-if 00 [Normal decode])
          Capabilities: [4c] Express Root Port (Slot-), MSI 00

Without any "Invalid class" error. So class code was properly reflected
into standard (read-only) PCI register 0x08.

Same fix is already implemented in U-Boot pcie_fsl.c driver in commit:
http://source.denx.de/u-boot/u-boot/-/commit/d18d06ac35229345a0af80977a408cfbe1d1015b

Fix activated by U-Boot stay active also after booting Linux kernel.
But boards which use older U-Boot version without that fix are affected and
still require this fix.

So implement this class code fix also in kernel fsl_pci.c driver.

Cc: stable@vger.kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220706101043.4867-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/fsl_rio: Fix refcount leak in fsl_rio_setup 2022-06-14T16:11:42+00:00 Miaoqian Lin linmq006@gmail.com 2022-05-12T12:37:18+00:00 bcb6c4c5eb4836a21411dfe8247bf9951eb6e7c3 [ Upstream commit fcee96924ba1596ca80a6770b2567ca546f9a482 ] of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: abc3aeae3aaa ("fsl-rio: Add two ports and rapidio message units support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220512123724.62931-1-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fcee96924ba1596ca80a6770b2567ca546f9a482 ]

of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: abc3aeae3aaa ("fsl-rio: Add two ports and rapidio message units support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220512123724.62931-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/iommu: Add missing of_node_put in iommu_init_early_dart 2022-06-14T16:11:31+00:00 Peng Wu wupeng58@huawei.com 2022-04-25T08:12:45+00:00 cb4f2dc513e99c5d0485661f114e4dda73612d10 [ Upstream commit 57b742a5b8945118022973e6416b71351df512fb ] The device_node pointer is returned by of_find_compatible_node with refcount incremented. We should use of_node_put() to avoid the refcount leak. Signed-off-by: Peng Wu <wupeng58@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220425081245.21705-1-wupeng58@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 57b742a5b8945118022973e6416b71351df512fb ]

The device_node pointer is returned by of_find_compatible_node
with refcount incremented. We should use of_node_put() to avoid
the refcount leak.

Signed-off-by: Peng Wu <wupeng58@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220425081245.21705-1-wupeng58@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/xics: fix refcount leak in icp_opal_init() 2022-06-14T16:11:30+00:00 Lv Ruyi lv.ruyi@zte.com.cn 2022-04-02T01:34:19+00:00 537a317e5ff45d1f5a0ecaf6a0d7c8043c878cb1 [ Upstream commit 5dd9e27ea4a39f7edd4bf81e9e70208e7ac0b7c9 ] The of_find_compatible_node() function returns a node pointer with refcount incremented, use of_node_put() on it when done. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220402013419.2410298-1-lv.ruyi@zte.com.cn Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5dd9e27ea4a39f7edd4bf81e9e70208e7ac0b7c9 ]

The of_find_compatible_node() function returns a node pointer with
refcount incremented, use of_node_put() on it when done.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220402013419.2410298-1-lv.ruyi@zte.com.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/sysdev: fix incorrect use to determine if list is empty 2022-04-15T12:18:15+00:00 Jakob Koschel jakobkoschel@gmail.com 2022-02-28T14:24:33+00:00 d2577dc2b3c3d03b18ab253cec159d37b24f7042 [ Upstream commit fa1321b11bd01752f5be2415e74a0e1a7c378262 ] 'gtm' will *always* be set by list_for_each_entry(). It is incorrect to assume that the iterator value will be NULL if the list is empty. Instead of checking the pointer it should be checked if the list is empty. Fixes: 83ff9dcf375c ("powerpc/sysdev: implement FSL GTM support") Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220228142434.576226-1-jakobkoschel@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fa1321b11bd01752f5be2415e74a0e1a7c378262 ]

'gtm' will *always* be set by list_for_each_entry().
It is incorrect to assume that the iterator value will be NULL if the
list is empty.

Instead of checking the pointer it should be checked if
the list is empty.

Fixes: 83ff9dcf375c ("powerpc/sysdev: implement FSL GTM support")
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220228142434.576226-1-jakobkoschel@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/dcr: Use cmplwi instead of 3-argument cmpli 2021-11-26T09:47:16+00:00 Michael Ellerman mpe@ellerman.id.au 2021-10-14T02:44:24+00:00 94292e4577a2b060e470d99e908094bf502e5e0d [ Upstream commit fef071be57dc43679a32d5b0e6ee176d6f12e9f2 ] In dcr-low.S we use cmpli with three arguments, instead of four arguments as defined in the ISA: cmpli cr0,r3,1024 This appears to be a PPC440-ism, looking at the "PPC440x5 CPU Core User’s Manual" it shows cmpli having no L field, but implied to be 0 due to the core being 32-bit. It mentions that the ISA defines four arguments and recommends using cmplwi. It also corresponds to the old POWER instruction set, which had no L field there, a reserved bit instead. dcr-low.S is only built 32-bit, because it is only built when DCR_NATIVE=y, which is only selected by 40x and 44x. Looking at the generated code (with gcc/gas) we see cmplwi as expected. Although gas is happy with the 3-argument version when building for 32-bit, the LLVM assembler is not and errors out with: arch/powerpc/sysdev/dcr-low.S:27:10: error: invalid operand for instruction cmpli 0,%r3,1024; ... ^ Switch to the cmplwi extended opcode, which avoids any confusion when reading the ISA, fixes the issue with the LLVM assembler, and also means the code could be built 64-bit in future (though that's very unlikely). Reported-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> BugLink: https://github.com/ClangBuiltLinux/linux/issues/1419 Link: https://lore.kernel.org/r/20211014024424.528848-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fef071be57dc43679a32d5b0e6ee176d6f12e9f2 ]

In dcr-low.S we use cmpli with three arguments, instead of four
arguments as defined in the ISA:

	cmpli	cr0,r3,1024

This appears to be a PPC440-ism, looking at the "PPC440x5 CPU Core
User’s Manual" it shows cmpli having no L field, but implied to be 0 due
to the core being 32-bit. It mentions that the ISA defines four
arguments and recommends using cmplwi.

It also corresponds to the old POWER instruction set, which had no L
field there, a reserved bit instead.

dcr-low.S is only built 32-bit, because it is only built when
DCR_NATIVE=y, which is only selected by 40x and 44x. Looking at the
generated code (with gcc/gas) we see cmplwi as expected.

Although gas is happy with the 3-argument version when building for
32-bit, the LLVM assembler is not and errors out with:

  arch/powerpc/sysdev/dcr-low.S:27:10: error: invalid operand for instruction
   cmpli 0,%r3,1024; ...
           ^

Switch to the cmplwi extended opcode, which avoids any confusion when
reading the ISA, fixes the issue with the LLVM assembler, and also means
the code could be built 64-bit in future (though that's very unlikely).

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BugLink: https://github.com/ClangBuiltLinux/linux/issues/1419
Link: https://lore.kernel.org/r/20211014024424.528848-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/xive: Discard disabled interrupts in get_irqchip_state() 2021-10-20T09:40:15+00:00 Cédric Le Goater clg@kaod.org 2021-10-11T07:02:03+00:00 1904050cacd71629fcee2664b962077c551da4a1 commit 6f779e1d359b8d5801f677c1d49dcfa10bf95674 upstream. When an interrupt is passed through, the KVM XIVE device calls the set_vcpu_affinity() handler which raises the P bit to mask the interrupt and to catch any in-flight interrupts while routing the interrupt to the guest. On the guest side, drivers (like some Intels) can request at probe time some MSIs and call synchronize_irq() to check that there are no in flight interrupts. This will call the XIVE get_irqchip_state() handler which will always return true as the interrupt P bit has been set on the host side and lock the CPU in an infinite loop. Fix that by discarding disabled interrupts in get_irqchip_state(). Fixes: da15c03b047d ("powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race") Cc: stable@vger.kernel.org #v5.4+ Signed-off-by: Cédric Le Goater <clg@kaod.org> Tested-by: seeteena <s1seetee@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211011070203.99726-1-clg@kaod.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6f779e1d359b8d5801f677c1d49dcfa10bf95674 upstream.

When an interrupt is passed through, the KVM XIVE device calls the
set_vcpu_affinity() handler which raises the P bit to mask the
interrupt and to catch any in-flight interrupts while routing the
interrupt to the guest.

On the guest side, drivers (like some Intels) can request at probe
time some MSIs and call synchronize_irq() to check that there are no
in flight interrupts. This will call the XIVE get_irqchip_state()
handler which will always return true as the interrupt P bit has been
set on the host side and lock the CPU in an infinite loop.

Fix that by discarding disabled interrupts in get_irqchip_state().

Fixes: da15c03b047d ("powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race")
Cc: stable@vger.kernel.org #v5.4+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: seeteena <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211011070203.99726-1-clg@kaod.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/xive: Fix xmon command "dxi" 2021-05-14T07:44:29+00:00 Cédric Le Goater clg@kaod.org 2021-03-31T14:45:12+00:00 c77bf004717d3f276b4e3eb77d0393d8ca2bf7a8 [ Upstream commit 33e4bc5946432a4ac173fd08e8e30a13ab94d06d ] When under xmon, the "dxi" command dumps the state of the XIVE interrupts. If an interrupt number is specified, only the state of the associated XIVE interrupt is dumped. This form of the command lacks an irq_data parameter which is nevertheless used by xmon_xive_get_irq_config(), leading to an xmon crash. Fix that by doing a lookup in the system IRQ mapping to query the IRQ descriptor data. Invalid interrupt numbers, or not belonging to the XIVE IRQ domain, OPAL event interrupt number for instance, should be caught by the previous query done at the firmware level. Fixes: 97ef27507793 ("powerpc/xive: Fix xmon support on the PowerNV platform") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Tested-by: Greg Kurz <groug@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210331144514.892250-8-clg@kaod.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 33e4bc5946432a4ac173fd08e8e30a13ab94d06d ]

When under xmon, the "dxi" command dumps the state of the XIVE
interrupts. If an interrupt number is specified, only the state of
the associated XIVE interrupt is dumped. This form of the command
lacks an irq_data parameter which is nevertheless used by
xmon_xive_get_irq_config(), leading to an xmon crash.

Fix that by doing a lookup in the system IRQ mapping to query the IRQ
descriptor data. Invalid interrupt numbers, or not belonging to the
XIVE IRQ domain, OPAL event interrupt number for instance, should be
caught by the previous query done at the firmware level.

Fixes: 97ef27507793 ("powerpc/xive: Fix xmon support on the PowerNV platform")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-8-clg@kaod.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc: sysdev: add missing iounmap() on error in mpic_msgr_probe() 2021-01-06T13:48:39+00:00 Qinglang Miao miaoqinglang@huawei.com 2020-10-28T09:15:51+00:00 22f815627c64f35e199e1bc17d7225c127244e2a [ Upstream commit ffa1797040c5da391859a9556be7b735acbe1242 ] I noticed that iounmap() of msgr_block_addr before return from mpic_msgr_probe() in the error handling case is missing. So use devm_ioremap() instead of just ioremap() when remapping the message register block, so the mapping will be automatically released on probe failure. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201028091551.136400-1-miaoqinglang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ffa1797040c5da391859a9556be7b735acbe1242 ]

I noticed that iounmap() of msgr_block_addr before return from
mpic_msgr_probe() in the error handling case is missing. So use
devm_ioremap() instead of just ioremap() when remapping the message
register block, so the mapping will be automatically released on
probe failure.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201028091551.136400-1-miaoqinglang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>