linux.git/arch/powerpc, branch v3.16.35

KVM: PPC: Book3S HV: Sanitize special-purpose register values on guest exit

2016-03-24T10:01:11+00:00

commit ccec44563b18a0ce90e2d4f332784b3cb25c8e9c upstream.

Thomas Huth discovered that a guest could cause a hard hang of a
host CPU by setting the Instruction Authority Mask Register (IAMR)
to a suitable value.  It turns out that this is because when the
code was added to context-switch the new special-purpose registers
(SPRs) that were added in POWER8, we forgot to add code to ensure
that they were restored to a sane value on guest exit.

This adds code to set those registers where a bad value could
compromise the execution of the host kernel to a suitable neutral
value on guest exit.

Fixes: b005255e12a3
Reported-by: Thomas Huth 
Reviewed-by: David Gibson 
Signed-off-by: Paul Mackerras 
Signed-off-by: Luis Henriques

powerpc: Fix dedotify for binutils >= 2.26

2016-03-04T10:26:37+00:00

commit f15838e9cac8f78f0cc506529bb9d3b9fa589c1f upstream.

Since binutils 2.26 BFD is doing suffix merging on STRTAB sections.  But
dedotify modifies the symbol names in place, which can also modify
unrelated symbols with a name that matches a suffix of a dotted name.  To
remove the leading dot of a symbol name we can just increment the pointer
into the STRTAB section instead.

Backport to all stables to avoid breakage when people update their
binutils - mpe.

Signed-off-by: Andreas Schwab 
Signed-off-by: Michael Ellerman 
[ luis: backported to 3.16: adjusted context ]
Signed-off-by: Luis Henriques

powerpc/perf: Remove PPMU_HAS_SSLOT flag for Power8

2016-02-17T10:22:48+00:00

commit 370f06c88528b3988fe24a372c10e1303bb94cf6 upstream.

Commit 7a7868326d77 ("powerpc/perf: Add an explict flag indicating
presence of SLOT field") introduced the PPMU_HAS_SSLOT flag to remove
the assumption that MMCRA[SLOT] was present when PPMU_ALT_SIPR was not
set.

That commit's changelog also mentions that Power8 does not support
MMCRA[SLOT]. However when the Power8 PMU support was merged, it
errnoeously included the PPMU_HAS_SSLOT flag.

So remove PPMU_HAS_SSLOT from the Power8 flags.

mpe: On systems where MMCRA[SLOT] exists, the field occupies bits 37:39
(IBM numbering). On Power8 bit 37 is reserved, and 38:39 overlap with
the high bits of the Threshold Event Counter Mantissa. I am not aware of
any published events which use the threshold counting mechanism, which
would cause the mantissa bits to be set. So in practice this bug is
unlikely to trigger.

Fixes: e05b9b9e5c10 ("powerpc/perf: Power8 PMU support")
Signed-off-by: Madhavan Srinivasan 
Signed-off-by: Michael Ellerman 
Signed-off-by: Luis Henriques

powerpc/eeh: Fix PE location code

2016-02-17T10:22:41+00:00

commit 7e56f627768da4e6480986b5145dc3422bc448a5 upstream.

In eeh_pe_loc_get(), the PE location code is retrieved from the
"ibm,loc-code" property of the device node for the bridge of the
PE's primary bus. It's not correct because the property indicates
the parent PE's location code.

This reads the correct PE location code from "ibm,io-base-loc-code"
or "ibm,slot-location-code" property of PE parent bus's device node.

Fixes: 357b2f3dd9b7 ("powerpc/eeh: Dump PE location code")
Signed-off-by: Gavin Shan 
Tested-by: Russell Currey 
Signed-off-by: Michael Ellerman 
Signed-off-by: Luis Henriques

KVM: PPC: Fix emulation of H_SET_DABR/X on POWER8

2016-02-16T19:50:01+00:00

commit 760a7364f27d974d100118d88190e574626e18a6 upstream.

In the old DABR register, the BT (Breakpoint Translation) bit
is bit number 61. In the new DAWRX register, the WT (Watchpoint
Translation) bit is bit number 59. So to move the DABR-BT bit
into the position of the DAWRX-WT bit, it has to be shifted by
two, not only by one. This fixes hardware watchpoints in gdb of
older guests that only use the H_SET_DABR/X interface instead
of the new H_SET_MODE interface.

Signed-off-by: Thomas Huth 
Reviewed-by: Laurent Vivier 
Reviewed-by: David Gibson 
Signed-off-by: Paul Mackerras 
Signed-off-by: Luis Henriques

powerpc/module: Handle R_PPC64_ENTRY relocations

2016-02-02T19:09:35+00:00

commit a61674bdfc7c2bf909c4010699607b62b69b7bec upstream.

GCC 6 will include changes to generated code with -mcmodel=large,
which is used to build kernel modules on powerpc64le.  This was
necessary because the large model is supposed to allow arbitrary
sizes and locations of the code and data sections, but the ELFv2
global entry point prolog still made the unconditional assumption
that the TOC associated with any particular function can be found
within 2 GB of the function entry point:

func:
	addis r2,r12,(.TOC.-func)@ha
	addi  r2,r2,(.TOC.-func)@l
	.localentry func, .-func

To remove this assumption, GCC will now generate instead this global
entry point prolog sequence when using -mcmodel=large:

	.quad .TOC.-func
func:
	.reloc ., R_PPC64_ENTRY
	ld    r2, -8(r12)
	add   r2, r2, r12
	.localentry func, .-func

The new .reloc triggers an optimization in the linker that will
replace this new prolog with the original code (see above) if the
linker determines that the distance between .TOC. and func is in
range after all.

Since this new relocation is now present in module object files,
the kernel module loader is required to handle them too.  This
patch adds support for the new relocation and implements the
same optimization done by the GNU linker.

Signed-off-by: Ulrich Weigand 
Signed-off-by: Michael Ellerman 
Signed-off-by: Luis Henriques

powerpc: Make {cmp}xchg* and their atomic_ versions fully ordered

2016-02-02T17:38:39+00:00

commit 81d7a3294de7e9828310bbf986a67246b13fa01e upstream.

According to memory-barriers.txt, xchg*, cmpxchg* and their atomic_
versions all need to be fully ordered, however they are now just
RELEASE+ACQUIRE, which are not fully ordered.

So also replace PPC_RELEASE_BARRIER and PPC_ACQUIRE_BARRIER with
PPC_ATOMIC_ENTRY_BARRIER and PPC_ATOMIC_EXIT_BARRIER in
__{cmp,}xchg_{u32,u64} respectively to guarantee fully ordered semantics
of atomic{,64}_{cmp,}xchg() and {cmp,}xchg(), as a complement of commit
b97021f85517 ("powerpc: Fix atomic_xxx_return barrier semantics")

This patch depends on patch "powerpc: Make value-returning atomics fully
ordered" for PPC_ATOMIC_ENTRY_BARRIER definition.

Signed-off-by: Boqun Feng 
Reviewed-by: Paul E. McKenney 
Acked-by: Peter Zijlstra (Intel) 
Signed-off-by: Michael Ellerman 
Signed-off-by: Luis Henriques

powerpc: Make value-returning atomics fully ordered

2016-02-02T17:38:38+00:00

commit 49e9cf3f0c04bf76ffa59242254110309554861d upstream.

According to memory-barriers.txt:

> Any atomic operation that modifies some state in memory and returns
> information about the state (old or new) implies an SMP-conditional
> general memory barrier (smp_mb()) on each side of the actual
> operation ...

Which mean these operations should be fully ordered. However on PPC,
PPC_ATOMIC_ENTRY_BARRIER is the barrier before the actual operation,
which is currently "lwsync" if SMP=y. The leading "lwsync" can not
guarantee fully ordered atomics, according to Paul Mckenney:

https://lkml.org/lkml/2015/10/14/970

To fix this, we define PPC_ATOMIC_ENTRY_BARRIER as "sync" to guarantee
the fully-ordered semantics.

This also makes futex atomics fully ordered, which can avoid possible
memory ordering problems if userspace code relies on futex system call
for fully ordered semantics.

Fixes: b97021f85517 ("powerpc: Fix atomic_xxx_return barrier semantics")
Signed-off-by: Boqun Feng 
Reviewed-by: Paul E. McKenney 
Acked-by: Peter Zijlstra (Intel) 
Signed-off-by: Michael Ellerman 
Signed-off-by: Luis Henriques

net: filter: make JITs zero A for SKF_AD_ALU_XOR_X

2016-01-25T10:44:05+00:00

commit 55795ef5469290f89f04e12e662ded604909e462 upstream.

The SKF_AD_ALU_XOR_X ancillary is not like the other ancillary data
instructions since it XORs A with X while all the others replace A with
some loaded value.  All the BPF JITs fail to clear A if this is used as
the first instruction in a filter.  This was found using american fuzzy
lop.

Add a helper to determine if A needs to be cleared given the first
instruction in a filter, and use this in the JITs.  Except for ARM, the
rest have only been compile-tested.

Fixes: 3480593131e0 ("net: filter: get rid of BPF_S_* enum")
Signed-off-by: Rabin Vincent 
Acked-by: Daniel Borkmann 
Acked-by: Alexei Starovoitov 
Signed-off-by: David S. Miller 
[ luis: backported to 3.16: adjusted context ]
Signed-off-by: Luis Henriques

KVM: PPC: Book3S HV: Prohibit setting illegal transaction state in MSR

2016-01-25T10:43:53+00:00

commit c20875a3e638e4a03e099b343ec798edd1af5cc6 upstream.

Currently it is possible for userspace (e.g. QEMU) to set a value
for the MSR for a guest VCPU which has both of the TS bits set,
which is an illegal combination.  The result of this is that when
we execute a hrfid (hypervisor return from interrupt doubleword)
instruction to enter the guest, the CPU will take a TM Bad Thing
type of program interrupt (vector 0x700).

Now, if PR KVM is configured in the kernel along with HV KVM, we
actually handle this without crashing the host or giving hypervisor
privilege to the guest; instead what happens is that we deliver a
program interrupt to the guest, with SRR0 reflecting the address
of the hrfid instruction and SRR1 containing the MSR value at that
point.  If PR KVM is not configured in the kernel, then we try to
run the host's program interrupt handler with the MMU set to the
guest context, which almost certainly causes a host crash.

This closes the hole by making kvmppc_set_msr_hv() check for the
illegal combination and force the TS field to a safe value (00,
meaning non-transactional).

Signed-off-by: Paul Mackerras 
Signed-off-by: Luis Henriques