linux.git/arch/powerpc, branch v6.10-rc6

powerpc: restore some missing spu syscalls

2024-06-25T13:57:26+00:00

A couple of system calls were inadventently removed from the table during
a bugfix for 32-bit powerpc entry. Restore the original behavior.

Fixes: e23750623835 ("powerpc/32: fix syscall wrappers with 64-bit arguments of unaligned register-pairs")
Acked-by: Michael Ellerman 
Signed-off-by: Arnd Bergmann

syscalls: fix compat_sys_io_pgetevents_time64 usage

2024-06-25T13:57:20+00:00

Using sys_io_pgetevents() as the entry point for compat mode tasks
works almost correctly, but misses the sign extension for the min_nr
and nr arguments.

This was addressed on parisc by switching to
compat_sys_io_pgetevents_time64() in commit 6431e92fc827 ("parisc:
io_pgetevents_time64() needs compat syscall in 32-bit compat mode"),
as well as by using more sophisticated system call wrappers on x86 and
s390. However, arm64, mips, powerpc, sparc and riscv still have the
same bug.

Change all of them over to use compat_sys_io_pgetevents_time64()
like parisc already does. This was clearly the intention when the
function was originally added, but it got hooked up incorrectly in
the tables.

Cc: stable@vger.kernel.org
Fixes: 48166e6ea47d ("y2038: add 64-bit time_t syscalls to all 32-bit architectures")
Acked-by: Heiko Carstens  # s390
Signed-off-by: Arnd Bergmann

KVM: PPC: Book3S HV: Prevent UAF in kvm_spapr_tce_attach_iommu_group()

2024-06-16T00:20:11+00:00

Al reported a possible use-after-free (UAF) in kvm_spapr_tce_attach_iommu_group().

It looks up `stt` from tablefd, but then continues to use it after doing
fdput() on the returned fd. After the fdput() the tablefd is free to be
closed by another thread. The close calls kvm_spapr_tce_release() and
then release_spapr_tce_table() (via call_rcu()) which frees `stt`.

Although there are calls to rcu_read_lock() in
kvm_spapr_tce_attach_iommu_group() they are not sufficient to prevent
the UAF, because `stt` is used outside the locked regions.

With an artifcial delay after the fdput() and a userspace program which
triggers the race, KASAN detects the UAF:

  BUG: KASAN: slab-use-after-free in kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm]
  Read of size 4 at addr c000200027552c30 by task kvm-vfio/2505
  CPU: 54 PID: 2505 Comm: kvm-vfio Not tainted 6.10.0-rc3-next-20240612-dirty #1
  Hardware name: 8335-GTH POWER9 0x4e1202 opal:skiboot-v6.5.3-35-g1851b2a06 PowerNV
  Call Trace:
    dump_stack_lvl+0xb4/0x108 (unreliable)
    print_report+0x2b4/0x6ec
    kasan_report+0x118/0x2b0
    __asan_load4+0xb8/0xd0
    kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm]
    kvm_vfio_set_attr+0x524/0xac0 [kvm]
    kvm_device_ioctl+0x144/0x240 [kvm]
    sys_ioctl+0x62c/0x1810
    system_call_exception+0x190/0x440
    system_call_vectored_common+0x15c/0x2ec
  ...
  Freed by task 0:
   ...
   kfree+0xec/0x3e0
   release_spapr_tce_table+0xd4/0x11c [kvm]
   rcu_core+0x568/0x16a0
   handle_softirqs+0x23c/0x920
   do_softirq_own_stack+0x6c/0x90
   do_softirq_own_stack+0x58/0x90
   __irq_exit_rcu+0x218/0x2d0
   irq_exit+0x30/0x80
   arch_local_irq_restore+0x128/0x230
   arch_local_irq_enable+0x1c/0x30
   cpuidle_enter_state+0x134/0x5cc
   cpuidle_enter+0x6c/0xb0
   call_cpuidle+0x7c/0x100
   do_idle+0x394/0x410
   cpu_startup_entry+0x60/0x70
   start_secondary+0x3fc/0x410
   start_secondary_prolog+0x10/0x14

Fix it by delaying the fdput() until `stt` is no longer in use, which
is effectively the entire function. To keep the patch minimal add a call
to fdput() at each of the existing return paths. Future work can convert
the function to goto or __cleanup style cleanup.

With the fix in place the test case no longer triggers the UAF.

Reported-by: Al Viro 
Closes: https://lore.kernel.org/all/20240610024437.GA1464458@ZenIV/
Signed-off-by: Michael Ellerman 
Link: https://msgid.link/20240614122910.3499489-1-mpe@ellerman.id.au

powerpc/crypto: Add generated P8 asm to .gitignore

2024-06-04T07:45:46+00:00

Looks like drivers/crypto/vmx/.gitignore should have been merged into
arch/powerpc/crypto/.gitignore as part of commit
109303336a0c ("crypto: vmx - Move to arch/powerpc/crypto") so that all
generated asm files are ignored.

Signed-off-by: Nathan Lynch 
Fixes: 109303336a0c ("crypto: vmx - Move to arch/powerpc/crypto")
Signed-off-by: Michael Ellerman 
Link: https://msgid.link/20240603-powerpc-crypto-ignore-p8-asm-v1-1-05843fec2bb7@linux.ibm.com

powerpc: Limit ARCH_HAS_KERNEL_FPU_SUPPORT to PPC64

2024-05-30T12:57:27+00:00

When building a 32-bit kernel, some toolchains do not allow mixing soft
float and hard float object files:

    LD      vmlinux.o
  powerpc64le-unknown-linux-musl-ld: lib/test_fpu_impl.o uses hard float, arch/powerpc/kernel/udbg.o uses soft float
  powerpc64le-unknown-linux-musl-ld: failed to merge target specific data of file lib/test_fpu_impl.o
  make[2]: *** [scripts/Makefile.vmlinux_o:62: vmlinux.o] Error 1
  make[1]: *** [Makefile:1152: vmlinux_o] Error 2
  make: *** [Makefile:240: __sub-make] Error 2

This is not an issue when building a 64-bit kernel. To unbreak the
build, limit ARCH_HAS_KERNEL_FPU_SUPPORT to 64-bit kernels. This is okay
because the only real user of this option, amdgpu, was previously
limited to PPC64 anyway; see commit a28e4b672f04 ("drm/amd/display: use
ARCH_HAS_KERNEL_FPU_SUPPORT").

Fixes: 01db473e1aa3 ("powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT")
Reported-by: kernel test robot 
Closes: https://lore.kernel.org/oe-kbuild-all/202405250851.Z4daYSWG-lkp@intel.com/
Reported-by: Guenter Roeck 
Closes: https://lore.kernel.org/lkml/eeffaec3-df63-4e55-ab7a-064a65c00efa@roeck-us.net/
Signed-off-by: Samuel Holland 
Tested-by: Guenter Roeck 
Signed-off-by: Michael Ellerman 
Link: https://msgid.link/20240529162852.1209-1-samuel.holland@sifive.com

powerpc/uaccess: Use YZ asm constraint for ld

2024-05-30T12:57:27+00:00

The 'ld' instruction requires a 4-byte aligned displacement because it
is a DS-form instruction. But the "m" asm constraint doesn't enforce
that.

Add a special case of __get_user_asm2_goto() so that the "YZ" constraint
can be used for "ld".

The "Z" constraint is documented in the GCC manual PowerPC machine
constraints, and specifies a "memory operand accessed with indexed or
indirect addressing". "Y" is not documented in the manual but specifies
a "memory operand for a DS-form instruction". Using both allows the
compiler to generate a DS-form "ld" or X-form "ldx" as appropriate.

The change has to be conditional on CONFIG_PPC_KERNEL_PREFIXED because
the "Y" constraint does not guarantee 4-byte alignment when prefixed
instructions are enabled.

No build errors have been reported due to this, but the possibility is
there depending on compiler code generation decisions.

Fixes: c20beffeec3c ("powerpc/uaccess: Use flexible addressing with __put_user()/__get_user()")
Signed-off-by: Michael Ellerman 
Link: https://msgid.link/20240529123029.146953-2-mpe@ellerman.id.au

powerpc/uaccess: Fix build errors seen with GCC 13/14

2024-05-30T12:57:27+00:00

Building ppc64le_defconfig with GCC 14 fails with assembler errors:

    CC      fs/readdir.o
  /tmp/ccdQn0mD.s: Assembler messages:
  /tmp/ccdQn0mD.s:212: Error: operand out of domain (18 is not a multiple of 4)
  /tmp/ccdQn0mD.s:226: Error: operand out of domain (18 is not a multiple of 4)
  ... [6 lines]
  /tmp/ccdQn0mD.s:1699: Error: operand out of domain (18 is not a multiple of 4)

A snippet of the asm shows:

  # ../fs/readdir.c:210:         unsafe_copy_dirent_name(dirent->d_name, name, namlen, efault_end);
         ld 9,0(29)       # MEM[(u64 *)name_38(D) + _88 * 1], MEM[(u64 *)name_38(D) + _88 * 1]
  # 210 "../fs/readdir.c" 1
         1:      std 9,18(8)     # put_user       # *__pus_addr_52, MEM[(u64 *)name_38(D) + _88 * 1]

The 'std' instruction requires a 4-byte aligned displacement because
it is a DS-form instruction, and as the assembler says, 18 is not a
multiple of 4.

A similar error is seen with GCC 13 and CONFIG_UBSAN_SIGNED_WRAP=y.

The fix is to change the constraint on the memory operand to put_user(),
from "m" which is a general memory reference to "YZ".

The "Z" constraint is documented in the GCC manual PowerPC machine
constraints, and specifies a "memory operand accessed with indexed or
indirect addressing". "Y" is not documented in the manual but specifies
a "memory operand for a DS-form instruction". Using both allows the
compiler to generate a DS-form "std" or X-form "stdx" as appropriate.

The change has to be conditional on CONFIG_PPC_KERNEL_PREFIXED because
the "Y" constraint does not guarantee 4-byte alignment when prefixed
instructions are enabled.

Unfortunately clang doesn't support the "Y" constraint so that has to be
behind an ifdef.

Although the build error is only seen with GCC 13/14, that appears
to just be luck. The constraint has been incorrect since it was first
added.

Fixes: c20beffeec3c ("powerpc/uaccess: Use flexible addressing with __put_user()/__get_user()")
Cc: stable@vger.kernel.org # v5.10+
Suggested-by: Kewen Lin 
Signed-off-by: Michael Ellerman 
Link: https://msgid.link/20240529123029.146953-1-mpe@ellerman.id.au

powerpc/pseries/lparcfg: drop error message from guest name lookup

2024-05-30T12:57:26+00:00

It's not an error or exceptional situation when the hosting
environment does not expose a name for the LP/guest via RTAS or the
device tree. This happens with qemu when run without the '-name'
option. The message also lacks a newline. Remove it.

Signed-off-by: Nathan Lynch 
Fixes: eddaa9a40275 ("powerpc/pseries: read the lpar name from the firmware")
Signed-off-by: Michael Ellerman 
Link: https://msgid.link/20240524-lparcfg-updates-v2-1-62e2e9d28724@linux.ibm.com

powerpc/bpf: enforce full ordering for ATOMIC operations with BPF_FETCH

2024-05-29T12:12:42+00:00

The Linux Kernel Memory Model [1][2] requires RMW operations that have a
return value to be fully ordered.

BPF atomic operations with BPF_FETCH (including BPF_XCHG and
BPF_CMPXCHG) return a value back so they need to be JITed to fully
ordered operations. POWERPC currently emits relaxed operations for
these.

We can show this by running the following litmus-test:

  PPC SB+atomic_add+fetch

  {
      0:r0=x;  (* dst reg assuming offset is 0 *)
      0:r1=2;  (* src reg *)
      0:r2=1;
      0:r4=y;  (* P0 writes to this, P1 reads this *)
      0:r5=z;  (* P1 writes to this, P0 reads this *)
      0:r6=0;

      1:r2=1;
      1:r4=y;
      1:r5=z;
  }

  P0                      | P1            ;
  stw         r2, 0(r4)   | stw  r2,0(r5) ;
                          |               ;
  loop:lwarx  r3, r6, r0  |               ;
  mr          r8, r3      |               ;
  add         r3, r3, r1  | sync          ;
  stwcx.      r3, r6, r0  |               ;
  bne         loop        |               ;
  mr          r1, r8      |               ;
                          |               ;
  lwa         r7, 0(r5)   | lwa  r7,0(r4) ;

  ~exists(0:r7=0 /\ 1:r7=0)

  Witnesses
  Positive: 9 Negative: 3
  Condition ~exists (0:r7=0 /\ 1:r7=0)
  Observation SB+atomic_add+fetch Sometimes 3 9

This test shows that the older store in P0 is reordered with a newer
load to a different address. Although there is a RMW operation with
fetch between them. Adding a sync before and after RMW fixes the issue:

  Witnesses
  Positive: 9 Negative: 0
  Condition ~exists (0:r7=0 /\ 1:r7=0)
  Observation SB+atomic_add+fetch Never 0 9

[1] https://www.kernel.org/doc/Documentation/memory-barriers.txt
[2] https://www.kernel.org/doc/Documentation/atomic_t.txt

Fixes: aea7ef8a82c0 ("powerpc/bpf/32: add support for BPF_ATOMIC bitwise operations")
Fixes: 2d9206b22743 ("powerpc/bpf/32: Add instructions for atomic_[cmp]xchg")
Fixes: dbe6e2456fb0 ("powerpc/bpf/64: add support for atomic fetch operations")
Fixes: 1e82dfaa7819 ("powerpc/bpf/64: Add instructions for atomic_[cmp]xchg")
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Puranjay Mohan 
Reviewed-by: Christophe Leroy 
Reviewed-by: Naveen N Rao 
Acked-by: Paul E. McKenney 
Signed-off-by: Michael Ellerman 
Link: https://msgid.link/20240513100248.110535-1-puranjay@kernel.org

Merge tag 'mm-stable-2024-05-24-11-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2024-05-24T19:47:28+00:00

Pull more mm updates from Andrew Morton:
 "Jeff Xu's implementation of the mseal() syscall"

* tag 'mm-stable-2024-05-24-11-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  selftest mm/mseal read-only elf memory segment
  mseal: add documentation
  selftest mm/mseal memory sealing
  mseal: add mseal syscall
  mseal: wire up mseal syscall