linux.git/arch/s390/include/asm/processor.h, branch v5.3.2

arch: replace _BITUL() in kernel-space headers with BIT()

2019-07-17T02:23:22+00:00

Now that BIT() can be used from assembly code, we can safely replace
_BITUL() with equivalent BIT().

UAPI headers are still required to use _BITUL(), but there is no more
reason to use it in kernel headers.  BIT() is shorter.

Link: http://lkml.kernel.org/r/20190609153941.17249-2-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada 
Cc: Heiko Carstens 
Cc: Vasily Gorbik 
Cc: Christian Borntraeger 
Cc: Vineet Gupta 
Cc: Catalin Marinas 
Cc: Will Deacon 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

processor: get rid of cpu_relax_yield

2019-06-15T10:25:55+00:00

stop_machine is the only user left of cpu_relax_yield. Given that it
now has special semantics which are tied to stop_machine introduce a
weak stop_machine_yield function which architectures can override, and
get rid of the generic cpu_relax_yield implementation.

Acked-by: Peter Zijlstra (Intel) 
Acked-by: Thomas Gleixner 
Signed-off-by: Heiko Carstens

s390: improve wait logic of stop_machine

2019-06-15T10:25:52+00:00

The stop_machine loop to advance the state machine and to wait for all
affected CPUs to check-in calls cpu_relax_yield in a tight loop until
the last missing CPUs acknowledged the state transition.

On a virtual system where not all logical CPUs are backed by real CPUs
all the time it can take a while for all CPUs to check-in. With the
current definition of cpu_relax_yield a diagnose 0x44 is done which
tells the hypervisor to schedule *some* other CPU. That can be any
CPU and not necessarily one of the CPUs that need to run in order to
advance the state machine. This can lead to a pretty bad diagnose 0x44
storm until the last missing CPU finally checked-in.

Replace the undirected cpu_relax_yield based on diagnose 0x44 with a
directed yield. Each CPU in the wait loop will pick up the next CPU
in the cpumask of stop_machine. The diagnose 0x9c is used to tell the
hypervisor to run this next CPU instead of the current one. If there
is only a limited number of real CPUs backing the virtual CPUs we
end up with the real CPUs passed around in a round-robin fashion.

[heiko.carstens@de.ibm.com]:
    Use cpumask_next_wrap as suggested by Peter Zijlstra.

Signed-off-by: Martin Schwidefsky 
Acked-by: Peter Zijlstra (Intel) 
Acked-by: Thomas Gleixner 
Signed-off-by: Heiko Carstens

s390: simplify disabled_wait

2019-05-02T11:54:11+00:00

The disabled_wait() function uses its argument as the PSW address when
it stops the CPU with a wait PSW that is disabled for interrupts.
The different callers sometimes use a specific number like 0xdeadbeef
to indicate a specific failure, the early boot code uses 0 and some
other calls sites use __builtin_return_address(0).

At the time a dump is created the current PSW and the registers of a
CPU are written to lowcore to make them avaiable to the dump analysis
tool. For a CPU stopped with disabled_wait the PSW and the registers
do not really make sense together, the PSW address does not point to
the function the registers belong to.

Simplify disabled_wait() by using _THIS_IP_ for the PSW address and
drop the argument to the function.

Signed-off-by: Martin Schwidefsky

s390/unwind: introduce stack unwind API

2019-05-02T11:54:11+00:00

Rework the dump_trace() stack unwinder interface to support different
unwinding algorithms. The new interface looks like this:

	struct unwind_state state;
	unwind_for_each_frame(&state, task, regs, start_stack)
		do_something(state.sp, state.ip, state.reliable);

The unwind_bc.c file contains the implementation for the classic
back-chain unwinder.

One positive side effect of the new code is it now handles ftraced
functions gracefully. It prints the real name of the return function
instead of 'return_to_handler'.

Signed-off-by: Martin Schwidefsky

s390: make __load_psw_mask work with clang

2019-04-11T11:36:52+00:00

clang fails to use the %O and %R inline assembly modifiers
the same way as gcc, leading to build failures with every use
of __load_psw_mask():

/tmp/nmi-4a9f80.s: Assembler messages:
/tmp/nmi-4a9f80.s:571: Error: junk at end of line: `+8(160(%r11))'
/tmp/nmi-4a9f80.s:626: Error: junk at end of line: `+8(160(%r11))'

Replace these with a more conventional way of passing the addresses
that should work with both clang and gcc.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Martin Schwidefsky

s390: fine-tune stack switch helper

2019-04-11T11:36:45+00:00

The CALL_ON_STACK helper currently does not work with clang and for
calls without arguments. It does not initialize r2 although the constraint
is "+&d". Rework the CALL_FMT_x and the CALL_ON_STACK macros to work
with clang and produce optimal code in all cases.

Reported-by: Arnd Bergmann 
Signed-off-by: Martin Schwidefsky

compiler: remove __no_sanitize_address_or_inline again

2018-11-05T16:14:18+00:00

The __no_sanitize_address_or_inline and __no_kasan_or_inline defines
are almost identical. The only difference is that __no_kasan_or_inline
does not have the 'notrace' attribute.

To be able to replace __no_sanitize_address_or_inline with the older
definition, add 'notrace' to __no_kasan_or_inline and change to two
users of __no_sanitize_address_or_inline in the s390 code.

The 'notrace' option is necessary for e.g. the __load_psw_mask function
in arch/s390/include/asm/processor.h. Without the option it is possible
to trace __load_psw_mask which leads to kernel stack overflow.

Signed-off-by: Martin Schwidefsky 
Pointed-out-by: Andrey Ryabinin 
Acked-by: Steven Rostedt (VMware) 
Signed-off-by: Linus Torvalds

treewide: remove current_text_addr

2018-10-31T15:54:12+00:00

Prefer _THIS_IP_ defined in linux/kernel.h.

Most definitions of current_text_addr were the same as _THIS_IP_, but
a few archs had inline assembly instead.

This patch removes the final call site of current_text_addr, making all
of the definitions dead code.

[akpm@linux-foundation.org: fix arch/csky/include/asm/processor.h]
Link: http://lkml.kernel.org/r/20180911182413.180715-1-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers 
Cc: Peter Zijlstra 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

s390/kasan: reipl and kexec support

2018-10-09T09:21:27+00:00

Some functions from both arch/s390/kernel/ipl.c and
arch/s390/kernel/machine_kexec.c are called without DAT enabled
(or with and without DAT enabled code paths). There is no easy way
to partially disable kasan for those files without a substantial
rework. Disable kasan for both files for now.

To avoid disabling kasan for arch/s390/kernel/diag.c DAT flag is
enabled in diag308 call. pcpu_delegate which disables DAT is marked
with __no_sanitize_address to disable instrumentation for that one
function.

Signed-off-by: Vasily Gorbik 
Signed-off-by: Martin Schwidefsky