linux.git/arch/s390/kernel/setup.c, branch v5.4.64

s390/setup: init jump labels before command line parsing

2020-07-16T06:16:46+00:00

commit 95e61b1b5d6394b53d147c0fcbe2ae70fbe09446 upstream.

Command line parameters might set static keys. This is true for s390 at
least since commit 6471384af2a6 ("mm: security: introduce init_on_alloc=1
and init_on_free=1 boot options"). To avoid the following WARN:

static_key_enable_cpuslocked(): static key 'init_on_alloc+0x0/0x40' used
before call to jump_label_init()

call jump_label_init() just before parse_early_param().
jump_label_init() is safe to call multiple times (x86 does that), doesn't
do any memory allocations and hence should be safe to call that early.

Fixes: 6471384af2a6 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options")
Cc:  # 5.3: d6df52e9996d: s390/maccess: add no DAT mode to kernel_write
Cc:  # 5.3
Reviewed-by: Heiko Carstens 
Signed-off-by: Vasily Gorbik 
Signed-off-by: Heiko Carstens 
Signed-off-by: Greg Kroah-Hartman

s390: prevent leaking kernel address in BEAR

2020-04-13T08:48:06+00:00

commit 0b38b5e1d0e2f361e418e05c179db05bb688bbd6 upstream.

When userspace executes a syscall or gets interrupted,
BEAR contains a kernel address when returning to userspace.
This make it pretty easy to figure out where the kernel is
mapped even with KASLR enabled. To fix this, add lpswe to
lowcore and always execute it there, so userspace sees only
the lowcore address of lpswe. For this we have to extend
both critical_cleanup and the SWITCH_ASYNC macro to also check
for lpswe addresses in lowcore.

Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)")
Cc:  # v5.2+
Reviewed-by: Gerald Schaefer 
Signed-off-by: Sven Schnelle 
Signed-off-by: Vasily Gorbik 
Signed-off-by: Greg Kroah-Hartman

s390/setup: Fix secure ipl message

2020-01-23T07:22:38+00:00

commit 40260b01d029ba374637838213af500e03305326 upstream.

The new machine loader on z15 always creates an IPL Report block and
thus sets the IPL_PL_FLAG_IPLSR even when secure boot is disabled. This
causes the wrong message being printed at boot. Fix this by checking for
IPL_PL_FLAG_SIPL instead.

Fixes: 9641b8cc733f ("s390/ipl: read IPL report at early boot")
Signed-off-by: Philipp Rudo 
Signed-off-by: Vasily Gorbik 
Signed-off-by: Greg Kroah-Hartman

Merge tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2019-09-17T21:04:43+00:00

Pull s390 updates from Vasily Gorbik:

 - Add support for IBM z15 machines.

 - Add SHA3 and CCA AES cipher key support in zcrypt and pkey
   refactoring.

 - Move to arch_stack_walk infrastructure for the stack unwinder.

 - Various kasan fixes and improvements.

 - Various command line parsing fixes.

 - Improve decompressor phase debuggability.

 - Lift no bss usage restriction for the early code.

 - Use refcount_t for reference counters for couple of places in mm
   code.

 - Logging improvements and return code fix in vfio-ccw code.

 - Couple of zpci fixes and minor refactoring.

 - Remove some outdated documentation.

 - Fix secure boot detection.

 - Other various minor code clean ups.

* tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
  s390: remove pointless drivers-y in drivers/s390/Makefile
  s390/cpum_sf: Fix line length and format string
  s390/pci: fix MSI message data
  s390: add support for IBM z15 machines
  s390/crypto: Support for SHA3 via CPACF (MSA6)
  s390/startup: add pgm check info printing
  s390/crypto: xts-aes-s390 fix extra run-time crypto self tests finding
  vfio-ccw: fix error return code in vfio_ccw_sch_init()
  s390: vfio-ap: fix warning reset not completed
  s390/base: remove unused s390_base_mcck_handler
  s390/sclp: Fix bit checked for has_sipl
  s390/zcrypt: fix wrong handling of cca cipher keygenflags
  s390/kasan: add kdump support
  s390/setup: avoid using strncmp with hardcoded length
  s390/sclp: avoid using strncmp with hardcoded length
  s390/module: avoid using strncmp with hardcoded length
  s390/pci: avoid using strncmp with hardcoded length
  s390/kaslr: reserve memory for kasan usage
  s390/mem_detect: provide single get_mem_detect_end
  s390/cmma: reuse kstrtobool for option value parsing
  ...

s390: add support for IBM z15 machines

2019-09-13T10:19:14+00:00

Add detection for machine types 0x8562 and 8x8561 and set the ELF platform
name to z15. Add the miscellaneous-instruction-extension 3 facility to
the list of facilities for z15.

And allow to generate code that only runs on a z15 machine.

Reviewed-by: Christian Borntraeger 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Heiko Carstens

s390/setup: avoid using strncmp with hardcoded length

2019-08-29T13:34:58+00:00

Replace strncmp usage in console mode setup code with simple strcmp.
Replace strncmp which is used for prefix comparison with str_has_prefix.

Signed-off-by: Vasily Gorbik

s390: move vmalloc option parsing to startup code

2019-08-21T10:41:43+00:00

Few other crucial memory setup options are already handled in
the startup code. Those values are needed by kaslr and kasan
implementations. "vmalloc" is the last piece required for future
improvements such as early decision on kernel page levels depth required
for actual memory setup, as well as vmalloc memory area access monitoring
in kasan.

Reviewed-by: Heiko Carstens 
Signed-off-by: Vasily Gorbik

s390/setup: adjust start_code of init_mm to _text

2019-08-06T11:58:34+00:00

After some investigation it doesn't look like init_mm fields
start_code/end_code are used anywhere besides potentially in dump_mm for
debugging purposes. Originally the value of 0 for start_code reflected
the presence of lowcore and early boot code. But with kaslr in place
start_code/end_code range should not span over unoccupied by the code
segment memory. So, adjust init_mm start_code to point at the beginning
of the code segment like other architectures do it.

Acked-by: Heiko Carstens 
Signed-off-by: Vasily Gorbik

s390: enforce CONFIG_SMP

2019-06-07T08:09:37+00:00

There never have been distributions that shiped with CONFIG_SMP=n for
s390. In addition the kernel currently doesn't even compile with
CONFIG_SMP=n for s390. Most likely it wouldn't even work, even if we
fix the compile error, since nobody tests it, since there is no use
case that I can think of.
Therefore simply enforce CONFIG_SMP and get rid of some more or
less unused code.

Reviewed-by: Christian Borntraeger 
Signed-off-by: Heiko Carstens

s390/unwind: introduce stack unwind API

2019-05-02T11:54:11+00:00

Rework the dump_trace() stack unwinder interface to support different
unwinding algorithms. The new interface looks like this:

	struct unwind_state state;
	unwind_for_each_frame(&state, task, regs, start_stack)
		do_something(state.sp, state.ip, state.reliable);

The unwind_bc.c file contains the implementation for the classic
back-chain unwinder.

One positive side effect of the new code is it now handles ftraced
functions gracefully. It prints the real name of the return function
instead of 'return_to_handler'.

Signed-off-by: Martin Schwidefsky