<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/arch/sh, branch v5.4.47</title>
<subtitle>Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git</subtitle>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/'/>
<entry>
<title>pinctrl: sh-pfc: sh7269: Fix CAN function GPIOs</title>
<updated>2020-02-24T07:36:41+00:00</updated>
<author>
<name>Geert Uytterhoeven</name>
<email>geert+renesas@glider.be</email>
</author>
<published>2019-12-18T19:48:10+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=e39aac0e65f1374da1b9354b0922431e42c9403c'/>
<id>e39aac0e65f1374da1b9354b0922431e42c9403c</id>
<content type='text'>
[ Upstream commit 02aeb2f21530c98fc3ca51028eda742a3fafbd9f ]

pinmux_func_gpios[] contains a hole due to the missing function GPIO
definition for the "CTX0&amp;CTX1" signal, which is the logical "AND" of the
first two CAN outputs.

A closer look reveals other issues:
  - Some functionality is available on alternative pins, but the
    PINMUX_DATA() entries is using the wrong marks,
  - Several configurations are missing.

Fix this by:
  - Renaming CTX0CTX1CTX2_MARK, CRX0CRX1_PJ22_MARK, and
    CRX0CRX1CRX2_PJ20_MARK to CTX0_CTX1_CTX2_MARK, CRX0_CRX1_PJ22_MARK,
    resp. CRX0_CRX1_CRX2_PJ20_MARK for consistency with the
    corresponding enum IDs,
  - Adding all missing enum IDs and marks,
  - Use the right (*_PJ2x) variants for alternative pins,
  - Adding all missing configurations to pinmux_data[],
  - Adding all missing function GPIO definitions to pinmux_func_gpios[].

See SH7268 Group, SH7269 Group User’s Manual: Hardware, Rev. 2.00:
  [1] Table 1.4 List of Pins
  [2] Figure 23.29 Connection Example when Using Channels 0 and 1 as One
      Channel (64 Mailboxes × 1 Channel) and Channel 2 as One Channel
      (32 Mailboxes × 1 Channel),
  [3] Figure 23.30 Connection Example when Using Channels 0, 1, and 2 as
      One Channel (96 Mailboxes × 1 Channel),
  [4] Table 48.3 Multiplexed Pins (Port B),
  [5] Table 48.4 Multiplexed Pins (Port C),
  [6] Table 48.10 Multiplexed Pins (Port J),
  [7] Section 48.2.4 Port B Control Registers 0 to 5 (PBCR0 to PBCR5).

Signed-off-by: Geert Uytterhoeven &lt;geert+renesas@glider.be&gt;
Link: https://lore.kernel.org/r/20191218194812.12741-5-geert+renesas@glider.be
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 02aeb2f21530c98fc3ca51028eda742a3fafbd9f ]

pinmux_func_gpios[] contains a hole due to the missing function GPIO
definition for the "CTX0&amp;CTX1" signal, which is the logical "AND" of the
first two CAN outputs.

A closer look reveals other issues:
  - Some functionality is available on alternative pins, but the
    PINMUX_DATA() entries is using the wrong marks,
  - Several configurations are missing.

Fix this by:
  - Renaming CTX0CTX1CTX2_MARK, CRX0CRX1_PJ22_MARK, and
    CRX0CRX1CRX2_PJ20_MARK to CTX0_CTX1_CTX2_MARK, CRX0_CRX1_PJ22_MARK,
    resp. CRX0_CRX1_CRX2_PJ20_MARK for consistency with the
    corresponding enum IDs,
  - Adding all missing enum IDs and marks,
  - Use the right (*_PJ2x) variants for alternative pins,
  - Adding all missing configurations to pinmux_data[],
  - Adding all missing function GPIO definitions to pinmux_func_gpios[].

See SH7268 Group, SH7269 Group User’s Manual: Hardware, Rev. 2.00:
  [1] Table 1.4 List of Pins
  [2] Figure 23.29 Connection Example when Using Channels 0 and 1 as One
      Channel (64 Mailboxes × 1 Channel) and Channel 2 as One Channel
      (32 Mailboxes × 1 Channel),
  [3] Figure 23.30 Connection Example when Using Channels 0, 1, and 2 as
      One Channel (96 Mailboxes × 1 Channel),
  [4] Table 48.3 Multiplexed Pins (Port B),
  [5] Table 48.4 Multiplexed Pins (Port C),
  [6] Table 48.10 Multiplexed Pins (Port J),
  [7] Section 48.2.4 Port B Control Registers 0 to 5 (PBCR0 to PBCR5).

Signed-off-by: Geert Uytterhoeven &lt;geert+renesas@glider.be&gt;
Link: https://lore.kernel.org/r/20191218194812.12741-5-geert+renesas@glider.be
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mm/memory_hotplug: shrink zones when offlining memory</title>
<updated>2020-01-09T09:19:56+00:00</updated>
<author>
<name>David Hildenbrand</name>
<email>david@redhat.com</email>
</author>
<published>2020-01-04T20:59:33+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=e84c5b76173b3b49b054aa340066d5001ab20b70'/>
<id>e84c5b76173b3b49b054aa340066d5001ab20b70</id>
<content type='text'>
commit feee6b2989165631b17ac6d4ccdbf6759254e85a upstream.

We currently try to shrink a single zone when removing memory.  We use
the zone of the first page of the memory we are removing.  If that
memmap was never initialized (e.g., memory was never onlined), we will
read garbage and can trigger kernel BUGs (due to a stale pointer):

    BUG: unable to handle page fault for address: 000000000000353d
    #PF: supervisor write access in kernel mode
    #PF: error_code(0x0002) - not-present page
    PGD 0 P4D 0
    Oops: 0002 [#1] SMP PTI
    CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ #317
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4
    Workqueue: kacpi_hotplug acpi_hotplug_work_fn
    RIP: 0010:clear_zone_contiguous+0x5/0x10
    Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840
    RSP: 0018:ffffad2400043c98 EFLAGS: 00010246
    RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000
    RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40
    RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001
    R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000
    R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680
    FS:  0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Call Trace:
     __remove_pages+0x4b/0x640
     arch_remove_memory+0x63/0x8d
     try_remove_memory+0xdb/0x130
     __remove_memory+0xa/0x11
     acpi_memory_device_remove+0x70/0x100
     acpi_bus_trim+0x55/0x90
     acpi_device_hotplug+0x227/0x3a0
     acpi_hotplug_work_fn+0x1a/0x30
     process_one_work+0x221/0x550
     worker_thread+0x50/0x3b0
     kthread+0x105/0x140
     ret_from_fork+0x3a/0x50
    Modules linked in:
    CR2: 000000000000353d

Instead, shrink the zones when offlining memory or when onlining failed.
Introduce and use remove_pfn_range_from_zone(() for that.  We now
properly shrink the zones, even if we have DIMMs whereby

 - Some memory blocks fall into no zone (never onlined)

 - Some memory blocks fall into multiple zones (offlined+re-onlined)

 - Multiple memory blocks that fall into different zones

Drop the zone parameter (with a potential dubious value) from
__remove_pages() and __remove_section().

Link: http://lkml.kernel.org/r/20191006085646.5768-6-david@redhat.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online")	[visible after d0dc12e86b319]
Signed-off-by: David Hildenbrand &lt;david@redhat.com&gt;
Reviewed-by: Oscar Salvador &lt;osalvador@suse.de&gt;
Cc: Michal Hocko &lt;mhocko@suse.com&gt;
Cc: "Matthew Wilcox (Oracle)" &lt;willy@infradead.org&gt;
Cc: "Aneesh Kumar K.V" &lt;aneesh.kumar@linux.ibm.com&gt;
Cc: Pavel Tatashin &lt;pasha.tatashin@soleen.com&gt;
Cc: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Cc: Dan Williams &lt;dan.j.williams@intel.com&gt;
Cc: Logan Gunthorpe &lt;logang@deltatee.com&gt;
Cc: &lt;stable@vger.kernel.org&gt;	[5.0+]
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit feee6b2989165631b17ac6d4ccdbf6759254e85a upstream.

We currently try to shrink a single zone when removing memory.  We use
the zone of the first page of the memory we are removing.  If that
memmap was never initialized (e.g., memory was never onlined), we will
read garbage and can trigger kernel BUGs (due to a stale pointer):

    BUG: unable to handle page fault for address: 000000000000353d
    #PF: supervisor write access in kernel mode
    #PF: error_code(0x0002) - not-present page
    PGD 0 P4D 0
    Oops: 0002 [#1] SMP PTI
    CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ #317
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4
    Workqueue: kacpi_hotplug acpi_hotplug_work_fn
    RIP: 0010:clear_zone_contiguous+0x5/0x10
    Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840
    RSP: 0018:ffffad2400043c98 EFLAGS: 00010246
    RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000
    RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40
    RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001
    R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000
    R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680
    FS:  0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Call Trace:
     __remove_pages+0x4b/0x640
     arch_remove_memory+0x63/0x8d
     try_remove_memory+0xdb/0x130
     __remove_memory+0xa/0x11
     acpi_memory_device_remove+0x70/0x100
     acpi_bus_trim+0x55/0x90
     acpi_device_hotplug+0x227/0x3a0
     acpi_hotplug_work_fn+0x1a/0x30
     process_one_work+0x221/0x550
     worker_thread+0x50/0x3b0
     kthread+0x105/0x140
     ret_from_fork+0x3a/0x50
    Modules linked in:
    CR2: 000000000000353d

Instead, shrink the zones when offlining memory or when onlining failed.
Introduce and use remove_pfn_range_from_zone(() for that.  We now
properly shrink the zones, even if we have DIMMs whereby

 - Some memory blocks fall into no zone (never onlined)

 - Some memory blocks fall into multiple zones (offlined+re-onlined)

 - Multiple memory blocks that fall into different zones

Drop the zone parameter (with a potential dubious value) from
__remove_pages() and __remove_section().

Link: http://lkml.kernel.org/r/20191006085646.5768-6-david@redhat.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online")	[visible after d0dc12e86b319]
Signed-off-by: David Hildenbrand &lt;david@redhat.com&gt;
Reviewed-by: Oscar Salvador &lt;osalvador@suse.de&gt;
Cc: Michal Hocko &lt;mhocko@suse.com&gt;
Cc: "Matthew Wilcox (Oracle)" &lt;willy@infradead.org&gt;
Cc: "Aneesh Kumar K.V" &lt;aneesh.kumar@linux.ibm.com&gt;
Cc: Pavel Tatashin &lt;pasha.tatashin@soleen.com&gt;
Cc: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Cc: Dan Williams &lt;dan.j.williams@intel.com&gt;
Cc: Logan Gunthorpe &lt;logang@deltatee.com&gt;
Cc: &lt;stable@vger.kernel.org&gt;	[5.0+]
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>pinctrl: sh-pfc: sh7734: Fix duplicate TCLK1_B</title>
<updated>2019-12-31T15:44:32+00:00</updated>
<author>
<name>Geert Uytterhoeven</name>
<email>geert+renesas@glider.be</email>
</author>
<published>2019-10-24T13:13:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=e9cd798d6300a14e48ef46bbfa1b5bcf5d97c87c'/>
<id>e9cd798d6300a14e48ef46bbfa1b5bcf5d97c87c</id>
<content type='text'>
[ Upstream commit 884caadad128efad8e00c1cdc3177bc8912ee8ec ]

The definitions for bit field [19:18] of the Peripheral Function Select
Register 3 were accidentally copied from bit field [20], leading to
duplicates for the TCLK1_B function, and missing TCLK0, CAN_CLK_B, and
ET0_ETXD4 functions.

Fix this by adding the missing GPIO_FN_CAN_CLK_B and GPIO_FN_ET0_ETXD4
enum values, and correcting the functions.

Reported-by: Ben Dooks &lt;ben.dooks@codethink.co.uk&gt;
Signed-off-by: Geert Uytterhoeven &lt;geert+renesas@glider.be&gt;
Link: https://lore.kernel.org/r/20191024131308.16659-1-geert+renesas@glider.be
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 884caadad128efad8e00c1cdc3177bc8912ee8ec ]

The definitions for bit field [19:18] of the Peripheral Function Select
Register 3 were accidentally copied from bit field [20], leading to
duplicates for the TCLK1_B function, and missing TCLK0, CAN_CLK_B, and
ET0_ETXD4 functions.

Fix this by adding the missing GPIO_FN_CAN_CLK_B and GPIO_FN_ET0_ETXD4
enum values, and correcting the functions.

Reported-by: Ben Dooks &lt;ben.dooks@codethink.co.uk&gt;
Signed-off-by: Geert Uytterhoeven &lt;geert+renesas@glider.be&gt;
Link: https://lore.kernel.org/r/20191024131308.16659-1-geert+renesas@glider.be
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mm: treewide: clarify pgtable_page_{ctor,dtor}() naming</title>
<updated>2019-09-26T17:10:44+00:00</updated>
<author>
<name>Mark Rutland</name>
<email>mark.rutland@arm.com</email>
</author>
<published>2019-09-25T23:49:46+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=b4ed71f557e458257e0f71b11969954acb389240'/>
<id>b4ed71f557e458257e0f71b11969954acb389240</id>
<content type='text'>
The naming of pgtable_page_{ctor,dtor}() seems to have confused a few
people, and until recently arm64 used these erroneously/pointlessly for
other levels of page table.

To make it incredibly clear that these only apply to the PTE level, and to
align with the naming of pgtable_pmd_page_{ctor,dtor}(), let's rename them
to pgtable_pte_page_{ctor,dtor}().

These changes were generated with the following shell script:

----
git grep -lw 'pgtable_page_.tor' | while read FILE; do
    sed -i '{s/pgtable_page_ctor/pgtable_pte_page_ctor/}' $FILE;
    sed -i '{s/pgtable_page_dtor/pgtable_pte_page_dtor/}' $FILE;
done
----

... with the documentation re-flowed to remain under 80 columns, and
whitespace fixed up in macros to keep backslashes aligned.

There should be no functional change as a result of this patch.

Link: http://lkml.kernel.org/r/20190722141133.3116-1-mark.rutland@arm.com
Signed-off-by: Mark Rutland &lt;mark.rutland@arm.com&gt;
Reviewed-by: Mike Rapoport &lt;rppt@linux.ibm.com&gt;
Acked-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;	[m68k]
Cc: Anshuman Khandual &lt;anshuman.khandual@arm.com&gt;
Cc: Matthew Wilcox &lt;willy@infradead.org&gt;
Cc: Michal Hocko &lt;mhocko@suse.com&gt;
Cc: Yu Zhao &lt;yuzhao@google.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The naming of pgtable_page_{ctor,dtor}() seems to have confused a few
people, and until recently arm64 used these erroneously/pointlessly for
other levels of page table.

To make it incredibly clear that these only apply to the PTE level, and to
align with the naming of pgtable_pmd_page_{ctor,dtor}(), let's rename them
to pgtable_pte_page_{ctor,dtor}().

These changes were generated with the following shell script:

----
git grep -lw 'pgtable_page_.tor' | while read FILE; do
    sed -i '{s/pgtable_page_ctor/pgtable_pte_page_ctor/}' $FILE;
    sed -i '{s/pgtable_page_dtor/pgtable_pte_page_dtor/}' $FILE;
done
----

... with the documentation re-flowed to remain under 80 columns, and
whitespace fixed up in macros to keep backslashes aligned.

There should be no functional change as a result of this patch.

Link: http://lkml.kernel.org/r/20190722141133.3116-1-mark.rutland@arm.com
Signed-off-by: Mark Rutland &lt;mark.rutland@arm.com&gt;
Reviewed-by: Mike Rapoport &lt;rppt@linux.ibm.com&gt;
Acked-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;	[m68k]
Cc: Anshuman Khandual &lt;anshuman.khandual@arm.com&gt;
Cc: Matthew Wilcox &lt;willy@infradead.org&gt;
Cc: Michal Hocko &lt;mhocko@suse.com&gt;
Cc: Yu Zhao &lt;yuzhao@google.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mm: consolidate pgtable_cache_init() and pgd_cache_init()</title>
<updated>2019-09-24T22:54:09+00:00</updated>
<author>
<name>Mike Rapoport</name>
<email>rppt@linux.ibm.com</email>
</author>
<published>2019-09-23T22:35:31+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=782de70c42930baae55234f3df0dc90774924447'/>
<id>782de70c42930baae55234f3df0dc90774924447</id>
<content type='text'>
Both pgtable_cache_init() and pgd_cache_init() are used to initialize kmem
cache for page table allocations on several architectures that do not use
PAGE_SIZE tables for one or more levels of the page table hierarchy.

Most architectures do not implement these functions and use __weak default
NOP implementation of pgd_cache_init().  Since there is no such default
for pgtable_cache_init(), its empty stub is duplicated among most
architectures.

Rename the definitions of pgd_cache_init() to pgtable_cache_init() and
drop empty stubs of pgtable_cache_init().

Link: http://lkml.kernel.org/r/1566457046-22637-1-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport &lt;rppt@linux.ibm.com&gt;
Acked-by: Will Deacon &lt;will@kernel.org&gt;		[arm64]
Acked-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;	[x86]
Cc: Catalin Marinas &lt;catalin.marinas@arm.com&gt;
Cc: Ingo Molnar &lt;mingo@redhat.com&gt;
Cc: Borislav Petkov &lt;bp@alien8.de&gt;
Cc: Matthew Wilcox &lt;willy@infradead.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Both pgtable_cache_init() and pgd_cache_init() are used to initialize kmem
cache for page table allocations on several architectures that do not use
PAGE_SIZE tables for one or more levels of the page table hierarchy.

Most architectures do not implement these functions and use __weak default
NOP implementation of pgd_cache_init().  Since there is no such default
for pgtable_cache_init(), its empty stub is duplicated among most
architectures.

Rename the definitions of pgd_cache_init() to pgtable_cache_init() and
drop empty stubs of pgtable_cache_init().

Link: http://lkml.kernel.org/r/1566457046-22637-1-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport &lt;rppt@linux.ibm.com&gt;
Acked-by: Will Deacon &lt;will@kernel.org&gt;		[arm64]
Acked-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;	[x86]
Cc: Catalin Marinas &lt;catalin.marinas@arm.com&gt;
Cc: Ingo Molnar &lt;mingo@redhat.com&gt;
Cc: Borislav Petkov &lt;bp@alien8.de&gt;
Cc: Matthew Wilcox &lt;willy@infradead.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>sh: switch to generic version of pte allocation</title>
<updated>2019-09-24T22:54:09+00:00</updated>
<author>
<name>Mike Rapoport</name>
<email>rppt@linux.ibm.com</email>
</author>
<published>2019-09-23T22:35:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=6fb12766f7fcd7934b09fbfbd32a725cc2febf96'/>
<id>6fb12766f7fcd7934b09fbfbd32a725cc2febf96</id>
<content type='text'>
The sh implementation pte_alloc_one(), pte_alloc_one_kernel(),
pte_free_kernel() and pte_free() is identical to the generic except of
lack of __GFP_ACCOUNT for the user PTEs allocation.

Switch sh to use generic version of these functions.

Link: http://lkml.kernel.org/r/1565250728-21721-4-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport &lt;rppt@linux.ibm.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The sh implementation pte_alloc_one(), pte_alloc_one_kernel(),
pte_free_kernel() and pte_free() is identical to the generic except of
lack of __GFP_ACCOUNT for the user PTEs allocation.

Switch sh to use generic version of these functions.

Link: http://lkml.kernel.org/r/1565250728-21721-4-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport &lt;rppt@linux.ibm.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mm: remove quicklist page table caches</title>
<updated>2019-09-24T22:54:09+00:00</updated>
<author>
<name>Nicholas Piggin</name>
<email>npiggin@gmail.com</email>
</author>
<published>2019-09-23T22:35:19+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=13224794cb0832caa403ad583d8605202cabc6bc'/>
<id>13224794cb0832caa403ad583d8605202cabc6bc</id>
<content type='text'>
Patch series "mm: remove quicklist page table caches".

A while ago Nicholas proposed to remove quicklist page table caches [1].

I've rebased his patch on the curren upstream and switched ia64 and sh to
use generic versions of PTE allocation.

[1] https://lore.kernel.org/linux-mm/20190711030339.20892-1-npiggin@gmail.com

This patch (of 3):

Remove page table allocator "quicklists".  These have been around for a
long time, but have not got much traction in the last decade and are only
used on ia64 and sh architectures.

The numbers in the initial commit look interesting but probably don't
apply anymore.  If anybody wants to resurrect this it's in the git
history, but it's unhelpful to have this code and divergent allocator
behaviour for minor archs.

Also it might be better to instead make more general improvements to page
allocator if this is still so slow.

Link: http://lkml.kernel.org/r/1565250728-21721-2-git-send-email-rppt@linux.ibm.com
Signed-off-by: Nicholas Piggin &lt;npiggin@gmail.com&gt;
Signed-off-by: Mike Rapoport &lt;rppt@linux.ibm.com&gt;
Cc: Tony Luck &lt;tony.luck@intel.com&gt;
Cc: Yoshinori Sato &lt;ysato@users.sourceforge.jp&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Patch series "mm: remove quicklist page table caches".

A while ago Nicholas proposed to remove quicklist page table caches [1].

I've rebased his patch on the curren upstream and switched ia64 and sh to
use generic versions of PTE allocation.

[1] https://lore.kernel.org/linux-mm/20190711030339.20892-1-npiggin@gmail.com

This patch (of 3):

Remove page table allocator "quicklists".  These have been around for a
long time, but have not got much traction in the last decade and are only
used on ia64 and sh architectures.

The numbers in the initial commit look interesting but probably don't
apply anymore.  If anybody wants to resurrect this it's in the git
history, but it's unhelpful to have this code and divergent allocator
behaviour for minor archs.

Also it might be better to instead make more general improvements to page
allocator if this is still so slow.

Link: http://lkml.kernel.org/r/1565250728-21721-2-git-send-email-rppt@linux.ibm.com
Signed-off-by: Nicholas Piggin &lt;npiggin@gmail.com&gt;
Signed-off-by: Mike Rapoport &lt;rppt@linux.ibm.com&gt;
Cc: Tony Luck &lt;tony.luck@intel.com&gt;
Cc: Yoshinori Sato &lt;ysato@users.sourceforge.jp&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping</title>
<updated>2019-09-19T20:27:23+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2019-09-19T20:27:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=671df189537883f36cf9c7d4f9495bfac0f86627'/>
<id>671df189537883f36cf9c7d4f9495bfac0f86627</id>
<content type='text'>
Pull dma-mapping updates from Christoph Hellwig:

 - add dma-mapping and block layer helpers to take care of IOMMU merging
   for mmc plus subsequent fixups (Yoshihiro Shimoda)

 - rework handling of the pgprot bits for remapping (me)

 - take care of the dma direct infrastructure for swiotlb-xen (me)

 - improve the dma noncoherent remapping infrastructure (me)

 - better defaults for -&gt;mmap, -&gt;get_sgtable and -&gt;get_required_mask
   (me)

 - cleanup mmaping of coherent DMA allocations (me)

 - various misc cleanups (Andy Shevchenko, me)

* tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits)
  mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE
  mmc: queue: Fix bigger segments usage
  arm64: use asm-generic/dma-mapping.h
  swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page
  swiotlb-xen: simplify cache maintainance
  swiotlb-xen: use the same foreign page check everywhere
  swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable
  xen: remove the exports for xen_{create,destroy}_contiguous_region
  xen/arm: remove xen_dma_ops
  xen/arm: simplify dma_cache_maint
  xen/arm: use dev_is_dma_coherent
  xen/arm: consolidate page-coherent.h
  xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance
  arm: remove wrappers for the generic dma remap helpers
  dma-mapping: introduce a dma_common_find_pages helper
  dma-mapping: always use VM_DMA_COHERENT for generic DMA remap
  vmalloc: lift the arm flag for coherent mappings to common code
  dma-mapping: provide a better default -&gt;get_required_mask
  dma-mapping: remove the dma_declare_coherent_memory export
  remoteproc: don't allow modular build
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull dma-mapping updates from Christoph Hellwig:

 - add dma-mapping and block layer helpers to take care of IOMMU merging
   for mmc plus subsequent fixups (Yoshihiro Shimoda)

 - rework handling of the pgprot bits for remapping (me)

 - take care of the dma direct infrastructure for swiotlb-xen (me)

 - improve the dma noncoherent remapping infrastructure (me)

 - better defaults for -&gt;mmap, -&gt;get_sgtable and -&gt;get_required_mask
   (me)

 - cleanup mmaping of coherent DMA allocations (me)

 - various misc cleanups (Andy Shevchenko, me)

* tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits)
  mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE
  mmc: queue: Fix bigger segments usage
  arm64: use asm-generic/dma-mapping.h
  swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page
  swiotlb-xen: simplify cache maintainance
  swiotlb-xen: use the same foreign page check everywhere
  swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable
  xen: remove the exports for xen_{create,destroy}_contiguous_region
  xen/arm: remove xen_dma_ops
  xen/arm: simplify dma_cache_maint
  xen/arm: use dev_is_dma_coherent
  xen/arm: consolidate page-coherent.h
  xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance
  arm: remove wrappers for the generic dma remap helpers
  dma-mapping: introduce a dma_common_find_pages helper
  dma-mapping: always use VM_DMA_COHERENT for generic DMA remap
  vmalloc: lift the arm flag for coherent mappings to common code
  dma-mapping: provide a better default -&gt;get_required_mask
  dma-mapping: remove the dma_declare_coherent_memory export
  remoteproc: don't allow modular build
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>dma-mapping: remove CONFIG_ARCH_NO_COHERENT_DMA_MMAP</title>
<updated>2019-09-04T09:13:18+00:00</updated>
<author>
<name>Christoph Hellwig</name>
<email>hch@lst.de</email>
</author>
<published>2019-08-06T12:06:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=62fcee9a3bd73e279d3052245a652a918d0c51da'/>
<id>62fcee9a3bd73e279d3052245a652a918d0c51da</id>
<content type='text'>
CONFIG_ARCH_NO_COHERENT_DMA_MMAP is now functionally identical to
!CONFIG_MMU, so remove the separate symbol.  The only difference is that
arm did not set it for !CONFIG_MMU, but arm uses a separate dma mapping
implementation including its own mmap method, which is handled by moving
the CONFIG_MMU check in dma_can_mmap so that is only applies to the
dma-direct case, just as the other ifdefs for it.

Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
Acked-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;	# m68k
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
CONFIG_ARCH_NO_COHERENT_DMA_MMAP is now functionally identical to
!CONFIG_MMU, so remove the separate symbol.  The only difference is that
arm did not set it for !CONFIG_MMU, but arm uses a separate dma mapping
implementation including its own mmap method, which is handled by moving
the CONFIG_MMU check in dma_can_mmap so that is only applies to the
dma-direct case, just as the other ifdefs for it.

Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
Acked-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;	# m68k
</pre>
</div>
</content>
</entry>
<entry>
<title>driver core: initialize a default DMA mask for platform device</title>
<updated>2019-08-22T16:41:55+00:00</updated>
<author>
<name>Christoph Hellwig</name>
<email>hch@lst.de</email>
</author>
<published>2019-08-16T06:24:35+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=cdfee5623290bc893f595636b44fa28e8207c5b3'/>
<id>cdfee5623290bc893f595636b44fa28e8207c5b3</id>
<content type='text'>
We still treat devices without a DMA mask as defaulting to 32-bits for
both mask, but a few releases ago we've started warning about such
cases, as they require special cases to work around this sloppyness.
Add a dma_mask field to struct platform_device so that we can initialize
the dma_mask pointer in struct device and initialize both masks to
32-bits by default, replacing similar functionality in m68k and
powerpc.  The arch_setup_pdev_archdata hooks is now unused and removed.

Note that the code looks a little odd with the various conditionals
because we have to support platform_device structures that are
statically allocated.

Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
Acked-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Link: https://lore.kernel.org/r/20190816062435.881-7-hch@lst.de
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
We still treat devices without a DMA mask as defaulting to 32-bits for
both mask, but a few releases ago we've started warning about such
cases, as they require special cases to work around this sloppyness.
Add a dma_mask field to struct platform_device so that we can initialize
the dma_mask pointer in struct device and initialize both masks to
32-bits by default, replacing similar functionality in m68k and
powerpc.  The arch_setup_pdev_archdata hooks is now unused and removed.

Note that the code looks a little odd with the various conditionals
because we have to support platform_device structures that are
statically allocated.

Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
Acked-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Link: https://lore.kernel.org/r/20190816062435.881-7-hch@lst.de
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
