linux.git/arch/um/kernel, branch v3.10.76

vm: add VM_FAULT_SIGSEGV handling support

2015-04-29T08:34:00+00:00

commit 33692f27597fcab536d7cbbcc8f52905133e4aa7 upstream.

The core VM already knows about VM_FAULT_SIGBUS, but cannot return a
"you should SIGSEGV" error, because the SIGSEGV case was generally
handled by the caller - usually the architecture fault handler.

That results in lots of duplication - all the architecture fault
handlers end up doing very similar "look up vma, check permissions, do
retries etc" - but it generally works.  However, there are cases where
the VM actually wants to SIGSEGV, and applications _expect_ SIGSEGV.

In particular, when accessing the stack guard page, libsigsegv expects a
SIGSEGV.  And it usually got one, because the stack growth is handled by
that duplicated architecture fault handler.

However, when the generic VM layer started propagating the error return
from the stack expansion in commit fee7e49d4514 ("mm: propagate error
from stack expansion even for guard page"), that now exposed the
existing VM_FAULT_SIGBUS result to user space.  And user space really
expected SIGSEGV, not SIGBUS.

To fix that case, we need to add a VM_FAULT_SIGSEGV, and teach all those
duplicate architecture fault handlers about it.  They all already have
the code to handle SIGSEGV, so it's about just tying that new return
value to the existing code, but it's all a bit annoying.

This is the mindless minimal patch to do this.  A more extensive patch
would be to try to gather up the mostly shared fault handling logic into
one generic helper routine, and long-term we really should do that
cleanup.

Just from this patch, you can generally see that most architectures just
copied (directly or indirectly) the old x86 way of doing things, but in
the meantime that original x86 model has been improved to hold the VM
semaphore for shorter times etc and to handle VM_FAULT_RETRY and other
"newer" things, so it would be a good idea to bring all those
improvements to the generic case and teach other architectures about
them too.

Reported-and-tested-by: Takashi Iwai 
Tested-by: Jan Engelhardt 
Acked-by: Heiko Carstens  # "s390 still compiles and boots"
Cc: linux-arch@vger.kernel.org
Signed-off-by: Linus Torvalds 
[shengyong: Backport to 3.10
 - adjust context
 - ignore modification for arch nios2, because 3.10 does not support it
 - ignore modification for driver lustre, because 3.10 does not support it
 - ignore VM_FAULT_FALLBACK in VM_FAULT_ERROR, becase 3.10 does not support
   this flag
 - add SIGSEGV handling to powerpc/cell spu_fault.c, because 3.10 does not
   separate it to copro_fault.c
 - add SIGSEGV handling in mm/memory.c, because 3.10 does not separate it
   to gup.c
]
Signed-off-by: Sheng Yong 
Signed-off-by: Greg Kroah-Hartman

arch: mm: pass userspace fault flag to generic fault handler

2014-11-21T17:22:56+00:00

commit 759496ba6407c6994d6a5ce3a5e74937d7816208 upstream.

Unlike global OOM handling, memory cgroup code will invoke the OOM killer
in any OOM situation because it has no way of telling faults occuring in
kernel context - which could be handled more gracefully - from
user-triggered faults.

Pass a flag that identifies faults originating in user space from the
architecture-specific fault handlers to generic code so that memcg OOM
handling can be improved.

Signed-off-by: Johannes Weiner 
Reviewed-by: Michal Hocko 
Cc: David Rientjes 
Cc: KAMEZAWA Hiroyuki 
Cc: azurIt 
Cc: KOSAKI Motohiro 
Signed-off-by: Andrew Morton 
Signed-off-by: Cong Wang 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

arch: mm: do not invoke OOM killer on kernel fault OOM

2014-11-21T17:22:55+00:00

commit 871341023c771ad233620b7a1fb3d9c7031c4e5c upstream.

Kernel faults are expected to handle OOM conditions gracefully (gup,
uaccess etc.), so they should never invoke the OOM killer.  Reserve this
for faults triggered in user context when it is the only option.

Most architectures already do this, fix up the remaining few.

Signed-off-by: Johannes Weiner 
Reviewed-by: Michal Hocko 
Acked-by: KOSAKI Motohiro 
Cc: David Rientjes 
Cc: KAMEZAWA Hiroyuki 
Cc: azurIt 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Cong Wang 
Signed-off-by: Greg Kroah-Hartman

uml: check length in exitcode_proc_write()

2013-11-13T03:05:33+00:00

commit 201f99f170df14ba52ea4c52847779042b7a623b upstream.

We don't cap the size of buffer from the user so we could write past the
end of the array here.  Only root can write to this file.

Reported-by: Nico Golde 
Reported-by: Fabian Yamaguchi 
Signed-off-by: Dan Carpenter 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

um: Implement probe_kernel_read()

2013-09-27T00:18:29+00:00

commit f75b1b1bedfb498cc43a992ce4d7ed8df3b1e770 upstream.

UML needs it's own probe_kernel_read() to handle kernel
mode faults correctly.
The implementation uses mincore() on the host side to detect
whether a page is owned by the UML kernel process.

This fixes also a possible crash when sysrq-t is used.
Starting with 3.10 sysrq-t calls probe_kernel_read() to
read details from the kernel workers. As kernel worker are
completely async pointers may turn NULL while reading them.

Signed-off-by: Richard Weinberger 
Cc: 
Cc: 
Signed-off-by: Greg Kroah-Hartman

dump_stack: consolidate dump_stack() implementations and unify their behaviors

2013-05-01T00:04:02+00:00

Both dump_stack() and show_stack() are currently implemented by each
architecture.  show_stack(NULL, NULL) dumps the backtrace for the
current task as does dump_stack().  On some archs, dump_stack() prints
extra information - pid, utsname and so on - in addition to the
backtrace while the two are identical on other archs.

The usages in arch-independent code of the two functions indicate
show_stack(NULL, NULL) should print out bare backtrace while
dump_stack() is used for debugging purposes when something went wrong,
so it does make sense to print additional information on the task which
triggered dump_stack().

There's no reason to require archs to implement two separate but mostly
identical functions.  It leads to unnecessary subtle information.

This patch expands the dummy fallback dump_stack() implementation in
lib/dump_stack.c such that it prints out debug information (taken from
x86) and invokes show_stack(NULL, NULL) and drops arch-specific
dump_stack() implementations in all archs except blackfin.  Blackfin's
dump_stack() does something wonky that I don't understand.

Debug information can be printed separately by calling
dump_stack_print_info() so that arch-specific dump_stack()
implementation can still emit the same debug information.  This is used
in blackfin.

This patch brings the following behavior changes.

* On some archs, an extra level in backtrace for show_stack() could be
  printed.  This is because the top frame was determined in
  dump_stack() on those archs while generic dump_stack() can't do that
  reliably.  It can be compensated by inlining dump_stack() but not
  sure whether that'd be necessary.

* Most archs didn't use to print debug info on dump_stack().  They do
  now.

An example WARN dump follows.

 WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505()
 Hardware name: empty
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9
  0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48
  ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c
  0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58
 Call Trace:
  [] dump_stack+0x19/0x1b
  [] warn_slowpath_common+0x7f/0xc0
  [] warn_slowpath_null+0x1a/0x20
  [] init_workqueues+0x35/0x505
  ...

v2: CPU number added to the generic debug info as requested by s390
    folks and dropped the s390 specific dump_stack().  This loses %ksp
    from the debug message which the maintainers think isn't important
    enough to keep the s390-specific dump_stack() implementation.

    dump_stack_print_info() is moved to kernel/printk.c from
    lib/dump_stack.c.  Because linkage is per objecct file,
    dump_stack_print_info() living in the same lib file as generic
    dump_stack() means that archs which implement custom dump_stack()
    - at this point, only blackfin - can't use dump_stack_print_info()
    as that will bring in the generic version of dump_stack() too.  v1
    The v1 patch broke build on blackfin due to this issue.  The build
    breakage was reported by Fengguang Wu.

Signed-off-by: Tejun Heo 
Acked-by: David S. Miller 
Acked-by: Vineet Gupta 
Acked-by: Jesper Nilsson 
Acked-by: Vineet Gupta 
Acked-by: Martin Schwidefsky 	[s390 bits]
Cc: Heiko Carstens 
Cc: Mike Frysinger 
Cc: Fengguang Wu 
Cc: Bjorn Helgaas 
Cc: Sam Ravnborg 
Acked-by: Richard Kuo 		[hexagon bits]
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2013-04-30T14:50:17+00:00

Pull SMP/hotplug changes from Ingo Molnar:
 "This is a pretty large, multi-arch series unifying and generalizing
  the various disjunct pieces of idle routines that architectures have
  historically copied from each other and have grown in random, wildly
  inconsistent and sometimes buggy directions:

   101 files changed, 455 insertions(+), 1328 deletions(-)

  this went through a number of review and test iterations before it was
  committed, it was tested on various architectures, was exposed to
  linux-next for quite some time - nevertheless it might cause problems
  on architectures that don't read the mailing lists and don't regularly
  test linux-next.

  This cat herding excercise was motivated by the -rt kernel, and was
  brought to you by Thomas "the Whip" Gleixner."

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  idle: Remove GENERIC_IDLE_LOOP config switch
  um: Use generic idle loop
  ia64: Make sure interrupts enabled when we "safe_halt()"
  sparc: Use generic idle loop
  idle: Remove unused ARCH_HAS_DEFAULT_IDLE
  bfin: Fix typo in arch_cpu_idle()
  xtensa: Use generic idle loop
  x86: Use generic idle loop
  unicore: Use generic idle loop
  tile: Use generic idle loop
  tile: Enter idle with preemption disabled
  sh: Use generic idle loop
  score: Use generic idle loop
  s390: Use generic idle loop
  powerpc: Use generic idle loop
  parisc: Use generic idle loop
  openrisc: Use generic idle loop
  mn10300: Use generic idle loop
  mips: Use generic idle loop
  microblaze: Use generic idle loop
  ...

early_printk: consolidate random copies of identical code

2013-04-30T01:28:13+00:00

The early console implementations are the same all over the place.  Move
the print function to kernel/printk and get rid of the copies.

[akpm@linux-foundation.org: arch/mips/kernel/early_printk.c needs kernel.h for va_list]
[paul.gortmaker@windriver.com: sh4: make the bios early console support depend on EARLY_PRINTK]
Signed-off-by: Thomas Gleixner 
Signed-off-by: Paul Gortmaker 
Cc: Russell King 
Acked-by: Mike Frysinger 
Cc: Michal Simek 
Cc: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mundt 
Cc: "David S. Miller" 
Cc: Chris Metcalf 
Cc: Richard Weinberger 
Reviewed-by: Ingo Molnar 
Tested-by: Paul Gortmaker 
Cc: Geert Uytterhoeven 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm/um: use free_highmem_page() to free highmem pages into buddy system

2013-04-29T22:54:32+00:00

Use helper function free_highmem_page() to free highmem pages into
the buddy system.

Signed-off-by: Jiang Liu 
Cc: Jeff Dike 
Cc: Richard Weinberger 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm/um: use common help functions to free reserved pages

2013-04-29T22:54:31+00:00

Use common help functions to free reserved pages.

Signed-off-by: Jiang Liu 
Cc: Jeff Dike 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds