linux.git/arch/unicore32, branch v4.14.123

kmemcheck: stop using GFP_NOTRACK and SLAB_NOTRACK

2018-02-22T14:42:23+00:00

commit 75f296d93bcebcfe375884ddac79e30263a31766 upstream.

Convert all allocations that used a NOTRACK flag to stop using it.

Link: http://lkml.kernel.org/r/20171007030159.22241-3-alexander.levin@verizon.com
Signed-off-by: Sasha Levin 
Cc: Alexander Potapenko 
Cc: Eric W. Biederman 
Cc: Michal Hocko 
Cc: Pekka Enberg 
Cc: Steven Rostedt 
Cc: Tim Hansen 
Cc: Vegard Nossum 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

kernel/exit.c: export abort() to modules

2018-02-13T09:19:49+00:00

commit dc8635b78cd8669c37e230058d18c33af7451ab1 upstream.

gcc -fisolate-erroneous-paths-dereference can generate calls to abort()
from modular code too.

[arnd@arndb.de: drop duplicate exports of abort()]
  Link: http://lkml.kernel.org/r/20180102103311.706364-1-arnd@arndb.de
Reported-by: Vineet Gupta 
Cc: Sudip Mukherjee 
Cc: Arnd Bergmann 
Cc: Alexey Brodkin 
Cc: Russell King 
Cc: Jose Abreu 
Signed-off-by: Andrew Morton 
Signed-off-by: Arnd Bergmann 
Signed-off-by: Linus Torvalds 
Cc: Evgeniy Didin 
Signed-off-by: Greg Kroah-Hartman

arch, mm: Allow arch_dup_mmap() to fail

2017-12-29T16:53:43+00:00

commit c10e83f598d08046dd1ebc8360d4bb12d802d51b upstream.

In order to sanitize the LDT initialization on x86 arch_dup_mmap() must be
allowed to fail. Fix up all instances.

Signed-off-by: Thomas Gleixner 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Andy Lutomirski 
Cc: Andy Lutomirsky 
Cc: Boris Ostrovsky 
Cc: Borislav Petkov 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Dave Hansen 
Cc: Dave Hansen 
Cc: David Laight 
Cc: Denys Vlasenko 
Cc: Eduardo Valentin 
Cc: Greg KH 
Cc: H. Peter Anvin 
Cc: Josh Poimboeuf 
Cc: Juergen Gross 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Will Deacon 
Cc: aliguori@amazon.com
Cc: dan.j.williams@intel.com
Cc: hughd@google.com
Cc: keescook@google.com
Cc: kirill.shutemov@linux.intel.com
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX license identifier to uapi header files with a license

2017-11-02T10:20:11+00:00

Many user space API headers have licensing information, which is either
incomplete, badly formatted or just a shorthand for referring to the
license under which the file is supposed to be.  This makes it hard for
compliance tools to determine the correct license.

Update these files with an SPDX license identifier.  The identifier was
chosen based on the license information in the file.

GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license
identifier with the added 'WITH Linux-syscall-note' exception, which is
the officially assigned exception identifier for the kernel syscall
exception:

   NOTE! This copyright does *not* cover user programs that use kernel
   services by normal system calls - this is merely considered normal use
   of the kernel, and does *not* fall under the heading of "derived work".

This exception makes it possible to include GPL headers into non GPL
code, without confusing license compliance tools.

Headers which have either explicit dual licensing or are just licensed
under a non GPL license are updated with the corresponding SPDX
identifier and the GPLv2 with syscall exception identifier.  The format
is:
        ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE)

SPDX license identifiers are a legally binding shorthand, which can be
used instead of the full boiler plate text.  The update does not remove
existing license information as this has to be done on a case by case
basis and the copyright holders might have to be consulted. This will
happen in a separate step.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.  See the previous patch in this series for the
methodology of how this patch was researched.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

unicore32/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks

2017-08-03T21:29:34+00:00

The pci_fixup_irqs() function allocates IRQs for all PCI devices present in
a system; those PCI devices possibly belong to different PCI bus trees (and
possibly rooted at different host bridges) and may well be enabled (ie
probed and bound to a driver) by the time pci_fixup_irqs() is called when
probing a given host bridge driver.

Furthermore, current kernel code relying on pci_fixup_irqs() to assign
legacy PCI IRQs to devices does not work at all for hotplugged devices in
that the code carrying out the IRQ fixup is called at host bridge driver
probe time, which just cannot take into account devices hotplugged after
the system has booted.

The introduction of map/swizzle function hooks in struct pci_host_bridge
allows us to define per-bridge map/swizzle functions that can be used at
device probe time in PCI core code to allocate IRQs for a given device
(through pci_assign_irq()).

Convert PCI host bridge initialization code to the
pci_scan_root_bus_bridge() API (that allows to pass a struct
pci_host_bridge with initialized map/swizzle pointers) and remove the
pci_fixup_irqs() call from arch code.

Signed-off-by: Lorenzo Pieralisi 
Signed-off-by: Bjorn Helgaas 
Cc: Guan Xuetao

unicore32: move generic-y of exported headers to uapi/asm/Kbuild

2017-07-11T12:33:52+00:00

Since commit fcc8487d477a ("uapi: export all headers under uapi
directories"), all (and only) headers under uapi directories are
exported, but asm-generic wrappers are still exceptions.

To complete de-coupling the uapi from kernel headers, move generic-y
of exported headers to uapi/asm/Kbuild.

With this change, "make headers_install" will just need to parse
uapi/asm/Kbuild to build up exported headers.

Also, move "generic-y += kprobes.h" up in order to keep the entries
sorted.

Signed-off-by: Masahiro Yamada

signal: Remove non-uapi

2017-06-04T13:11:47+00:00

By moving the kernel side __SI_* defintions right next to the userspace
ones we can kill the non-uapi versions of  include
include/asm-generic/siginfo.h and untangle the unholy mess of includes.

[ tglx: Removed uapi/asm/siginfo.h from m32r, microblaze, mn10300 and score ]

Signed-off-by: Christoph Hellwig 
Signed-off-by: Thomas Gleixner 
Cc: linux-arch@vger.kernel.org
Cc: Fenghua Yu 
Cc: Tony Luck 
Cc: linux-ia64@vger.kernel.org
Cc: Arnd Bergmann 
Cc: sparclinux@vger.kernel.org
Cc: "David S. Miller" 
Link: http://lkml.kernel.org/r/20170603190102.28866-6-hch@lst.de

Merge tag 'kbuild-uapi-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2017-05-11T03:45:36+00:00

Pull Kbuild UAPI updates from Masahiro Yamada:
 "Improvement of headers_install by Nicolas Dichtel.

  It has been long since the introduction of uapi directories, but the
  de-coupling of exported headers has not been completed. Headers listed
  in header-y are exported whether they exist in uapi directories or
  not. His work fixes this inconsistency.

  All (and only) headers under uapi directories are now exported. The
  asm-generic wrappers are still exceptions, but this is a big step
  forward"

* tag 'kbuild-uapi-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  arch/include: remove empty Kbuild files
  uapi: export all arch specifics directories
  uapi: export all headers under uapi directories
  smc_diag.h: fix include from userland
  btrfs_tree.h: fix include from userland
  uapi: includes linux/types.h before exporting files
  Makefile.headersinst: remove destination-y option
  Makefile.headersinst: cleanup input files
  x86: stop exporting msr-index.h to userland
  nios2: put setup.h in uapi
  h8300: put bitsperlong.h in uapi

Merge tag 'kbuild-misc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2017-05-11T03:41:43+00:00

Pull misc Kbuild updates from Masahiro Yamada:

 - clean up builddeb script

 - use full path for KBUILD_IMAGE to fix rpm-pkg build

 - fix objdiff tool to ignore debug info

* tag 'kbuild-misc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  builddeb: fix typo
  builddeb: Update a few outdated and hardcoded strings
  deb-pkg: Remove the KBUILD_IMAGE workaround
  unicore32: Use full path in KBUILD_IMAGE definition
  sh: Use full path in KBUILD_IMAGE definition
  arc: Use full path in KBUILD_IMAGE definition
  arm: Use full path in KBUILD_IMAGE definition
  arm64: Use full path in KBUILD_IMAGE definition
  scripts: objdiff: Ignore debug info when comparing