linux.git/arch/x86/include, branch v6.1.2 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git x86/apic: Handle no CONFIG_X86_X2APIC on systems with x2APIC enabled by BIOS 2022-12-31T12:32:58+00:00 Mateusz Jończyk mat.jonczyk@o2.pl 2022-11-29T21:50:08+00:00 87c51832b7af08c0e59fab32ada893d84717420d [ Upstream commit e3998434da4f5b1f57f8d6a8a9f8502ee3723bae ] A kernel that was compiled without CONFIG_X86_X2APIC was unable to boot on platforms that have x2APIC already enabled in the BIOS before starting the kernel. The kernel was supposed to panic with an approprite error message in validate_x2apic() due to the missing X2APIC support. However, validate_x2apic() was run too late in the boot cycle, and the kernel tried to initialize the APIC nonetheless. This resulted in an earlier panic in setup_local_APIC() because the APIC was not registered. In my experiments, a panic message in setup_local_APIC() was not visible in the graphical console, which resulted in a hang with no indication what has gone wrong. Instead of calling panic(), disable the APIC, which results in a somewhat working system with the PIC only (and no SMP). This way the user is able to diagnose the problem more easily. Disabling X2APIC mode is not an option because it's impossible on systems with locked x2APIC. The proper place to disable the APIC in this case is in check_x2apic(), which is called early from setup_arch(). Doing this in __apic_intr_mode_select() is too late. Make check_x2apic() unconditionally available and remove the empty stub. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Reported-by: Robert Elliott (Servers) <elliott@hpe.com> Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/lkml/d573ba1c-0dc4-3016-712a-cc23a8a33d42@molgen.mpg.de Link: https://lore.kernel.org/lkml/20220911084711.13694-3-mat.jonczyk@o2.pl Link: https://lore.kernel.org/all/20221129215008.7247-1-mat.jonczyk@o2.pl Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e3998434da4f5b1f57f8d6a8a9f8502ee3723bae ]

A kernel that was compiled without CONFIG_X86_X2APIC was unable to boot on
platforms that have x2APIC already enabled in the BIOS before starting the
kernel.

The kernel was supposed to panic with an approprite error message in
validate_x2apic() due to the missing X2APIC support.

However, validate_x2apic() was run too late in the boot cycle, and the
kernel tried to initialize the APIC nonetheless. This resulted in an
earlier panic in setup_local_APIC() because the APIC was not registered.

In my experiments, a panic message in setup_local_APIC() was not visible
in the graphical console, which resulted in a hang with no indication
what has gone wrong.

Instead of calling panic(), disable the APIC, which results in a somewhat
working system with the PIC only (and no SMP). This way the user is able to
diagnose the problem more easily.

Disabling X2APIC mode is not an option because it's impossible on systems
with locked x2APIC.

The proper place to disable the APIC in this case is in check_x2apic(),
which is called early from setup_arch(). Doing this in
__apic_intr_mode_select() is too late.

Make check_x2apic() unconditionally available and remove the empty stub.

Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reported-by: Robert Elliott (Servers) <elliott@hpe.com>
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/d573ba1c-0dc4-3016-712a-cc23a8a33d42@molgen.mpg.de
Link: https://lore.kernel.org/lkml/20220911084711.13694-3-mat.jonczyk@o2.pl
Link: https://lore.kernel.org/all/20221129215008.7247-1-mat.jonczyk@o2.pl
Signed-off-by: Sasha Levin <sashal@kernel.org>
x86/boot: Skip realmode init code when running as Xen PV guest 2022-12-31T12:32:16+00:00 Juergen Gross jgross@suse.com 2022-11-23T11:45:23+00:00 b1898793777fe10a31c160bb8bc385d6eea640c6 [ Upstream commit f1e525009493cbd569e7c8dd7d58157855f8658d ] When running as a Xen PV guest there is no need for setting up the realmode trampoline, as realmode isn't supported in this environment. Trying to setup the trampoline has been proven to be problematic in some cases, especially when trying to debug early boot problems with Xen requiring to keep the EFI boot-services memory mapped (some firmware variants seem to claim basically all memory below 1Mb for boot services). Introduce new x86_platform_ops operations for that purpose, which can be set to a NOP by the Xen PV specific kernel boot code. [ bp: s/call_init_real_mode/do_init_real_mode/ ] Fixes: 084ee1c641a0 ("x86, realmode: Relocator for realmode code") Suggested-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20221123114523.3467-1-jgross@suse.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f1e525009493cbd569e7c8dd7d58157855f8658d ]

When running as a Xen PV guest there is no need for setting up the
realmode trampoline, as realmode isn't supported in this environment.

Trying to setup the trampoline has been proven to be problematic in
some cases, especially when trying to debug early boot problems with
Xen requiring to keep the EFI boot-services memory mapped (some
firmware variants seem to claim basically all memory below 1Mb for boot
services).

Introduce new x86_platform_ops operations for that purpose, which can
be set to a NOP by the Xen PV specific kernel boot code.

  [ bp: s/call_init_real_mode/do_init_real_mode/ ]

Fixes: 084ee1c641a0 ("x86, realmode: Relocator for realmode code")
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221123114523.3467-1-jgross@suse.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
x86/bugs: Make sure MSR_SPEC_CTRL is updated properly upon resume from S3 2022-12-02T23:45:33+00:00 Pawan Gupta pawan.kumar.gupta@linux.intel.com 2022-11-30T15:25:51+00:00 66065157420c5b9b3f078f43d313c153e1ff7f83 The "force" argument to write_spec_ctrl_current() is currently ambiguous as it does not guarantee the MSR write. This is due to the optimization that writes to the MSR happen only when the new value differs from the cached value. This is fine in most cases, but breaks for S3 resume when the cached MSR value gets out of sync with the hardware MSR value due to S3 resetting it. When x86_spec_ctrl_current is same as x86_spec_ctrl_base, the MSR write is skipped. Which results in SPEC_CTRL mitigations not getting restored. Move the MSR write from write_spec_ctrl_current() to a new function that unconditionally writes to the MSR. Update the callers accordingly and rename functions. [ bp: Rework a bit. ] Fixes: caa0ff24d5d0 ("x86/bugs: Keep a per-CPU IA32_SPEC_CTRL value") Suggested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/806d39b0bfec2fe8f50dc5446dff20f5bb24a959.1669821572.git.pawan.kumar.gupta@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
The "force" argument to write_spec_ctrl_current() is currently ambiguous
as it does not guarantee the MSR write. This is due to the optimization
that writes to the MSR happen only when the new value differs from the
cached value.

This is fine in most cases, but breaks for S3 resume when the cached MSR
value gets out of sync with the hardware MSR value due to S3 resetting
it.

When x86_spec_ctrl_current is same as x86_spec_ctrl_base, the MSR write
is skipped. Which results in SPEC_CTRL mitigations not getting restored.

Move the MSR write from write_spec_ctrl_current() to a new function that
unconditionally writes to the MSR. Update the callers accordingly and
rename functions.

  [ bp: Rework a bit. ]

Fixes: caa0ff24d5d0 ("x86/bugs: Keep a per-CPU IA32_SPEC_CTRL value")
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/806d39b0bfec2fe8f50dc5446dff20f5bb24a959.1669821572.git.pawan.kumar.gupta@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'mm-hotfixes-stable-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm 2022-12-02T21:39:38+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-12-02T21:39:38+00:00 bdaa78c6aa861f0e8c612a0b2272423d92f0071c Pull misc hotfixes from Andrew Morton: "15 hotfixes, 11 marked cc:stable. Only three or four of the latter address post-6.0 issues, which is hopefully a sign that things are converging" * tag 'mm-hotfixes-stable-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: revert "kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible" Kconfig.debug: provide a little extra FRAME_WARN leeway when KASAN is enabled drm/amdgpu: temporarily disable broken Clang builds due to blown stack-frame mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths mm/khugepaged: fix GUP-fast interaction by sending IPI mm/khugepaged: take the right locks for page table retraction mm: migrate: fix THP's mapcount on isolation mm: introduce arch_has_hw_nonleaf_pmd_young() mm: add dummy pmd_young() for architectures not having it mm/damon/sysfs: fix wrong empty schemes assumption under online tuning in damon_sysfs_set_schemes() tools/vm/slabinfo-gnuplot: use "grep -E" instead of "egrep" nilfs2: fix NULL pointer dereference in nilfs_palloc_commit_free_entry() hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing madvise: use zap_page_range_single for madvise dontneed mm: replace VM_WARN_ON to pr_warn if the node is offline with __GFP_THISNODE 
Pull misc hotfixes from Andrew Morton:
 "15 hotfixes,  11 marked cc:stable.

  Only three or four of the latter address post-6.0 issues, which is
  hopefully a sign that things are converging"

* tag 'mm-hotfixes-stable-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  revert "kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible"
  Kconfig.debug: provide a little extra FRAME_WARN leeway when KASAN is enabled
  drm/amdgpu: temporarily disable broken Clang builds due to blown stack-frame
  mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths
  mm/khugepaged: fix GUP-fast interaction by sending IPI
  mm/khugepaged: take the right locks for page table retraction
  mm: migrate: fix THP's mapcount on isolation
  mm: introduce arch_has_hw_nonleaf_pmd_young()
  mm: add dummy pmd_young() for architectures not having it
  mm/damon/sysfs: fix wrong empty schemes assumption under online tuning in damon_sysfs_set_schemes()
  tools/vm/slabinfo-gnuplot: use "grep -E" instead of "egrep"
  nilfs2: fix NULL pointer dereference in nilfs_palloc_commit_free_entry()
  hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing
  madvise: use zap_page_range_single for madvise dontneed
  mm: replace VM_WARN_ON to pr_warn if the node is offline with __GFP_THISNODE
mm: introduce arch_has_hw_nonleaf_pmd_young() 2022-11-30T22:49:41+00:00 Juergen Gross jgross@suse.com 2022-11-23T06:45:10+00:00 4aaf269c768dbacd6268af73fda2ffccaa3f1d88 When running as a Xen PV guests commit eed9a328aa1a ("mm: x86: add CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG") can cause a protection violation in pmdp_test_and_clear_young(): BUG: unable to handle page fault for address: ffff8880083374d0 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 3026067 P4D 3026067 PUD 3027067 PMD 7fee5067 PTE 8010000008337065 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 158 Comm: kswapd0 Not tainted 6.1.0-rc5-20221118-doflr+ #1 RIP: e030:pmdp_test_and_clear_young+0x25/0x40 This happens because the Xen hypervisor can't emulate direct writes to page table entries other than PTEs. This can easily be fixed by introducing arch_has_hw_nonleaf_pmd_young() similar to arch_has_hw_pte_young() and test that instead of CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG. Link: https://lkml.kernel.org/r/20221123064510.16225-1-jgross@suse.com Fixes: eed9a328aa1a ("mm: x86: add CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG") Signed-off-by: Juergen Gross <jgross@suse.com> Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Acked-by: Yu Zhao <yuzhao@google.com> Tested-by: Sander Eikelenboom <linux@eikelenboom.it> Acked-by: David Hildenbrand <david@redhat.com> [core changes] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 
When running as a Xen PV guests commit eed9a328aa1a ("mm: x86: add
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG") can cause a protection violation in
pmdp_test_and_clear_young():

 BUG: unable to handle page fault for address: ffff8880083374d0
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0003) - permissions violation
 PGD 3026067 P4D 3026067 PUD 3027067 PMD 7fee5067 PTE 8010000008337065
 Oops: 0003 [#1] PREEMPT SMP NOPTI
 CPU: 7 PID: 158 Comm: kswapd0 Not tainted 6.1.0-rc5-20221118-doflr+ #1
 RIP: e030:pmdp_test_and_clear_young+0x25/0x40

This happens because the Xen hypervisor can't emulate direct writes to
page table entries other than PTEs.

This can easily be fixed by introducing arch_has_hw_nonleaf_pmd_young()
similar to arch_has_hw_pte_young() and test that instead of
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG.

Link: https://lkml.kernel.org/r/20221123064510.16225-1-jgross@suse.com
Fixes: eed9a328aa1a ("mm: x86: add CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Acked-by: Yu Zhao <yuzhao@google.com>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Acked-by: David Hildenbrand <david@redhat.com>	[core changes]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm: add dummy pmd_young() for architectures not having it 2022-11-30T22:49:41+00:00 Juergen Gross jgross@suse.com 2022-11-30T22:49:41+00:00 6617da8fb565445e0be4a4885443006374943d09 In order to avoid #ifdeffery add a dummy pmd_young() implementation as a fallback. This is required for the later patch "mm: introduce arch_has_hw_nonleaf_pmd_young()". Link: https://lkml.kernel.org/r/fd3ac3cd-7349-6bbd-890a-71a9454ca0b3@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Yu Zhao <yuzhao@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 
In order to avoid #ifdeffery add a dummy pmd_young() implementation as a
fallback.  This is required for the later patch "mm: introduce
arch_has_hw_nonleaf_pmd_young()".

Link: https://lkml.kernel.org/r/fd3ac3cd-7349-6bbd-890a-71a9454ca0b3@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
x86/tsx: Add a feature bit for TSX control MSR support 2022-11-21T13:08:20+00:00 Pawan Gupta pawan.kumar.gupta@linux.intel.com 2022-11-15T19:17:05+00:00 aaa65d17eec372c6a9756833f3964ba05b05ea14 Support for the TSX control MSR is enumerated in MSR_IA32_ARCH_CAPABILITIES. This is different from how other CPU features are enumerated i.e. via CPUID. Currently, a call to tsx_ctrl_is_supported() is required for enumerating the feature. In the absence of a feature bit for TSX control, any code that relies on checking feature bits directly will not work. In preparation for adding a feature bit check in MSR save/restore during suspend/resume, set a new feature bit X86_FEATURE_TSX_CTRL when MSR_IA32_TSX_CTRL is present. Also make tsx_ctrl_is_supported() use the new feature bit to avoid any overhead of reading the MSR. [ bp: Remove tsx_ctrl_is_supported(), add room for two more feature bits in word 11 which are coming up in the next merge window. ] Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/de619764e1d98afbb7a5fa58424f1278ede37b45.1668539735.git.pawan.kumar.gupta@linux.intel.com 
Support for the TSX control MSR is enumerated in MSR_IA32_ARCH_CAPABILITIES.
This is different from how other CPU features are enumerated i.e. via
CPUID. Currently, a call to tsx_ctrl_is_supported() is required for
enumerating the feature. In the absence of a feature bit for TSX control,
any code that relies on checking feature bits directly will not work.

In preparation for adding a feature bit check in MSR save/restore
during suspend/resume, set a new feature bit X86_FEATURE_TSX_CTRL when
MSR_IA32_TSX_CTRL is present. Also make tsx_ctrl_is_supported() use the
new feature bit to avoid any overhead of reading the MSR.

  [ bp: Remove tsx_ctrl_is_supported(), add room for two more feature
    bits in word 11 which are coming up in the next merge window. ]

Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/de619764e1d98afbb7a5fa58424f1278ede37b45.1668539735.git.pawan.kumar.gupta@linux.intel.com
Merge tag 'locking_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2022-11-20T18:39:45+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-11-20T18:39:45+00:00 6a211a753d1c836856cf942afbf3b6bfdcf0a5f4 Pull locking fix from Borislav Petkov: - Fix a build error with clang 11 * tag 'locking_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking: Fix qspinlock/x86 inline asm error 
Pull locking fix from Borislav Petkov:

 - Fix a build error with clang 11

* tag 'locking_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking: Fix qspinlock/x86 inline asm error
locking: Fix qspinlock/x86 inline asm error 2022-11-16T09:18:09+00:00 Guo Jin guoj17@chinatelecom.cn 2022-11-08T06:01:26+00:00 23df39fc6a36183af5e6e4f47523f1ad2cdc1d30 When compiling linux 6.1.0-rc3 configured with CONFIG_64BIT=y and CONFIG_PARAVIRT_SPINLOCKS=y on x86_64 using LLVM 11.0, an error: "<inline asm> error: changed section flags for .spinlock.text, expected:: 0x6" occurred. The reason is the .spinlock.text in kernel/locking/qspinlock.o is used many times, but its flags are omitted in subsequent use. LLVM 11.0 assembler didn't permit to leave out flags in subsequent uses of the same sections. So this patch adds the corresponding flags to avoid above error. Fixes: 501f7f69bca1 ("locking: Add __lockfunc to slow path functions") Signed-off-by: Guo Jin <guoj17@chinatelecom.cn> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20221108060126.2505-1-guoj17@chinatelecom.cn 
When compiling linux 6.1.0-rc3 configured with CONFIG_64BIT=y and
CONFIG_PARAVIRT_SPINLOCKS=y on x86_64 using LLVM 11.0, an error:
"<inline asm> error: changed section flags for .spinlock.text,
expected:: 0x6" occurred.

The reason is the .spinlock.text in kernel/locking/qspinlock.o
is used many times, but its flags are omitted in subsequent use.

LLVM 11.0 assembler didn't permit to
leave out flags in subsequent uses of the same sections.

So this patch adds the corresponding flags to avoid above error.

Fixes: 501f7f69bca1 ("locking: Add __lockfunc to slow path functions")
Signed-off-by: Guo Jin <guoj17@chinatelecom.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20221108060126.2505-1-guoj17@chinatelecom.cn
x86/cpu: Restore AMD's DE_CFG MSR after resume 2022-11-15T18:15:58+00:00 Borislav Petkov bp@suse.de 2022-11-14T11:44:01+00:00 2632daebafd04746b4b96c2f26a6021bc38f6209 DE_CFG contains the LFENCE serializing bit, restore it on resume too. This is relevant to older families due to the way how they do S3. Unify and correct naming while at it. Fixes: e4d0e84e4907 ("x86/cpu/AMD: Make LFENCE a serializing instruction") Reported-by: Andrew Cooper <Andrew.Cooper3@citrix.com> Reported-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
DE_CFG contains the LFENCE serializing bit, restore it on resume too.
This is relevant to older families due to the way how they do S3.

Unify and correct naming while at it.

Fixes: e4d0e84e4907 ("x86/cpu/AMD: Make LFENCE a serializing instruction")
Reported-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Reported-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>