linux.git/arch/xtensa/Kconfig, branch v4.13.7

drivers: dma-mapping: allow dma_common_mmap() for NOMMU

2017-06-30T17:03:07+00:00

Currently, internals of dma_common_mmap() is compiled out if build is
done for either NOMMU or target which explicitly says it does not
have/want coherent DMA mmap. It turned out that dma_common_mmap() can
be handy in NOMMU setup (at least for ARM).

This patch converts exitent NOMMU targets to use ARCH_NO_COHERENT_DMA_MMAP,
thus when CONFIG_MMU is gone from dma_common_mmap() their behaviour stays
unchanged.

ARM is not converted to ARCH_NO_COHERENT_DMA_MMAP because it 1)
already has mmap callback which can handle (at some extent) NOMMU 2)
already defines dummy pgprot_noncached() for NOMMU build.

c6x and frv stay untouched since they already have ARCH_NO_COHERENT_DMA_MMAP.

Cc: Steven Miao 
Cc: Geert Uytterhoeven 
Cc: Michal Simek 
Cc: Yoshinori Sato 
Cc: Rich Felker 
Cc: Chris Zankel 
Cc: Max Filippov 
Suggested-by: Christoph Hellwig 
Signed-off-by: Vladimir Murzin 
Tested-by: Benjamin Gaignard

xtensa: enable HAVE_DMA_CONTIGUOUS

2016-12-15T18:41:50+00:00

Enable HAVE_DMA_CONTIGUOUS, reserve contiguous memory at bootmem_init,
use dma_alloc_from_contiguous and dma_release_from_contiguous in
xtensa_dma_alloc/free.
This allows for big contiguous DMA buffer allocation from designated
area configured in the device tree.

Signed-off-by: Max Filippov

xtensa: disable MMU initialization option on MMUv2 cores

2016-09-29T19:55:00+00:00

MMU initialization option is currently ignored on MMUv2 cores, but it is
used in Kconfig to select kernel load and start addresses. This choice
is not available for MMUv2 cores as they have hardwired TLB entries.
Disable MMU initialization option for known MMUv2 cores so that they get
correct kernel load/start address by default.
This fixes the default allmodconfig build.

Signed-off-by: Max Filippov

xtensa: fix default kernel load address

2016-09-10T01:38:35+00:00

Make default kernel load address 0xd0003000 for MMUv2 cores and
0x60003000 for noMMU cores. Don't initialize MMU inside vmlinux for
predefined MMUv2 cores (it's noop anyway).

This fixes the following defconfig build error:
  arch/xtensa/kernel/built-in.o: In function `fast_alloca':
  (.text+0x99a): dangerous relocation: j: cannot encode: _WindowUnderflow12
  arch/xtensa/kernel/built-in.o: In function `fast_alloca':
  (.text+0x99d): dangerous relocation: j: cannot encode: _WindowUnderflow8
  arch/xtensa/kernel/built-in.o: In function `fast_alloca':
  (.text+0x9a0): dangerous relocation: j: cannot encode: _WindowUnderflow4
  arch/xtensa/kernel/built-in.o: In function `window_overflow_restore_a0_fixup':
  (.text+0x23a3): dangerous relocation: j: cannot encode: (.DoubleExceptionVector.text+0x104)
  arch/xtensa/kernel/built-in.o: In function `window_overflow_restore_a0_fixup':
  (.text+0x23c1): dangerous relocation: j: cannot encode: (.DoubleExceptionVector.text+0x104)
  arch/xtensa/kernel/built-in.o: In function `window_overflow_restore_a0_fixup':
  (.text+0x23dd): dangerous relocation: j: cannot encode: (.DoubleExceptionVector.text+0x104)

With this change all xtensa defconfigs build correctly.

Reported-by: Guenter Roeck 
Signed-off-by: Max Filippov

xtensa: support reserved-memory DT node

2016-07-24T03:34:00+00:00

This allows reserving regions of physical memory from the device tree.
See Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
for more details.

Signed-off-by: Max Filippov

xtensa: drop sysmem and switch to memblock

2016-07-24T03:34:00+00:00

Memblock is the standard kernel boot-time memory tracker/allocator. Use
it instead of the custom sysmem allocator. This allows using kmemleak,
CMA and device tree memory reservation.

Signed-off-by: Max Filippov

xtensa: minimize use of PLATFORM_DEFAULT_MEM_{ADDR,SIZE}

2016-07-24T03:33:59+00:00

Now that the kernel load address and KSEG physical base address have
their own Kconfig symbols PLATFORM_DEFAULT_MEM seems redundant. It makes
little sense to use it in MMU configurations instead of KSEG_PADDR.
In noMMU configurations there's no explicit KSEG, so it's still useful
for the early cache initialization and definition of ARCH_PFN_OFFSET,
which affects mem_map size.

- limit it to noMMU; MMU variants have XCHAL_KSEG_PADDR and
  XCHAL_KSEG_SIZE;
- don't use it to define TASK_SIZE or MAX_LOW_PFN: first doesn't make
  any difference in noMMU, second is meaningless as there's no high
  memory;
- don't add default physical memory region: memory layout should come
  from the DT, bootloader tags, or memmap= command line parameter.

Signed-off-by: Max Filippov

xtensa: cleanup MMU setup and kernel layout macros

2016-07-24T03:33:58+00:00

Make kernel load address explicit, independent of the selected MMU
configuration and configurable from Kconfig. Do not restrict it to the
first 512MB of the physical address space.

Cleanup kernel memory layout macros:

- rename VECBASE_RESET_VADDR to VECBASE_VADDR, XC_VADDR to VECTOR_VADDR;
- drop VIRTUAL_MEMORY_ADDRESS and LOAD_MEMORY_ADDRESS;
- introduce PHYS_OFFSET and use it in __va and __pa definitions;
- synchronize MMU/noMMU vectors, drop unused NMI vector;
- replace hardcoded vectors offset of 0x3000 with Kconfig symbol.

Signed-off-by: Max Filippov

xtensa: add alternative kernel memory layouts

2016-07-24T03:33:58+00:00

MMUv3 is able to support low memory bigger than 128MB.
Implement 256MB and 512MB KSEG layouts:

- add Kconfig selector for KSEG layout;
- add KSEG base address, size and alignment definitions to
  arch/xtensa/include/asm/kmem_layout.h;
- use new definitions in TLB initialization;
- add build time memory map consistency checks.

See Documentation/xtensa/mmu.txt for the details of new memory layouts.

Signed-off-by: Max Filippov

exit_thread: remove empty bodies

2016-05-21T00:58:30+00:00

Define HAVE_EXIT_THREAD for archs which want to do something in
exit_thread. For others, let's define exit_thread as an empty inline.

This is a cleanup before we change the prototype of exit_thread to
accept a task parameter.

[akpm@linux-foundation.org: fix mips]
Signed-off-by: Jiri Slaby 
Cc: "David S. Miller" 
Cc: "H. Peter Anvin" 
Cc: "James E.J. Bottomley" 
Cc: Aurelien Jacquiot 
Cc: Benjamin Herrenschmidt 
Cc: Catalin Marinas 
Cc: Chen Liqin 
Cc: Chris Metcalf 
Cc: Chris Zankel 
Cc: David Howells 
Cc: Fenghua Yu 
Cc: Geert Uytterhoeven 
Cc: Guan Xuetao 
Cc: Haavard Skinnemoen 
Cc: Hans-Christian Egtvedt 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ivan Kokshaysky 
Cc: James Hogan 
Cc: Jeff Dike 
Cc: Jesper Nilsson 
Cc: Jiri Slaby 
Cc: Jonas Bonn 
Cc: Koichi Yasutake 
Cc: Lennox Wu 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Martin Schwidefsky 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Mikael Starvik 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Ralf Baechle 
Cc: Rich Felker 
Cc: Richard Henderson 
Cc: Richard Kuo 
Cc: Richard Weinberger 
Cc: Russell King 
Cc: Steven Miao 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds