linux.git/arch/xtensa/platforms, branch v4.1.8

Merge tag 'xtensa-for-next-20150413' of git://github.com/jcmvbkbc/linux-xtensa into for_next

2015-04-14T04:47:53+00:00

Xtensa improvements for 4.1:

- fix locking issues in ISS network driver;
- document PIC and MX interrupt distributor device tree bindings;
- add CY7C67300 USB controller support to XTFPGA.

Signed-off-by: Chris Zankel

xtensa: xtfpga: add CY7C67300 USB controller support

2015-04-13T06:34:37+00:00

Signed-off-by: Max Filippov

xtensa: ISS: fix locking in TAP network adapter

2015-04-13T06:01:00+00:00

- don't lock lp->lock in the iss_net_timer for the call of iss_net_poll,
  it will lock it itself;
- invert order of lp->lock and opened_lock acquisition in the
  iss_net_open to make it consistent with iss_net_poll;
- replace spin_lock with spin_lock_bh when acquiring locks used in
  iss_net_timer from non-atomic context;
- replace spin_lock_irqsave with spin_lock_bh in the iss_net_start_xmit
  as the driver doesn't use lp->lock in the hard IRQ context;
- replace __SPIN_LOCK_UNLOCKED(lp.lock) with spin_lock_init, otherwise
  lockdep is unhappy about using non-static key.

Cc: 
Signed-off-by: Max Filippov

xtensa: xtfpga: fix hardware lockup caused by LCD driver

2015-02-27T04:55:29+00:00

LCD driver is always built for the XTFPGA platform, but its base address
is not configurable, and is wrong for ML605/KC705. Its initialization
locks up KC705 board hardware.

Make the whole driver optional, and its base address and bus width
configurable. Implement 4-bit bus access method.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov

xtensa: remove s6000 variant and s6105 platform

2014-10-21T09:29:01+00:00

The Stretch s6000 family support has been merged into mainline 5 years
ago. There appear to be no users of this code since nobody complained
that there is a merge error preventing compilation.

Apart from the s6105 IP camera reference design there are no s6000 devices
known to ever have run Linux and as the chips are out of production there
probably never will be. The successor s7000 no longer uses an Xtensa core
for the OS.

Let's remove the code until someone is found who actually needs it.

Signed-off-by: Daniel Glöckner 
Signed-off-by: Max Filippov

xtensa: make PLATFORM_DEFAULT_MEM parameters configurable

2014-10-21T09:28:59+00:00

This allows using xtfpga platform with both MMU and noMMU cores.

Signed-off-by: Max Filippov

xtensa: ISS: don't depend on CONFIG_TTY

2014-05-05T16:04:10+00:00

Build console support only when CONFIG_TTY is selected.
This restores ISS as the default platform for allnoconfig builds.

Signed-off-by: Max Filippov 
Signed-off-by: Chris Zankel

xtensa: xt2000: drop redundant sysmem initialization

2014-04-10T07:19:03+00:00

sysmem structure initialization in xt2000 platform_init is identical to
the one done in init_arch just before the call to platform_init.

Signed-off-by: Max Filippov

xtensa: xtfpga: set ethoc clock frequency

2014-02-21T17:33:44+00:00

Connect xtfpga board ethernet MAC to the clock in the DTS. Set up MAC
base frequency in the platform data in case of build w/o CONFIG_OF.

Signed-off-by: Max Filippov

xtensa: xtfpga: use common clock framework

2014-02-21T17:33:43+00:00

With this change the board needs to set up single clock object, users of
this clock will get correct frequency automatically.

Signed-off-by: Max Filippov