linux.git/arch, branch v6.1.98 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git arm64: dts: rockchip: Fix the DCDC_REG2 minimum voltage on Quartz64 Model B 2024-07-11T10:47:16+00:00 Dragan Simic dsimic@manjaro.org 2024-05-20T17:20:28+00:00 ee42c150831324b95412b34afcd2a0176cb0a942 commit d201c92bff90f3d3d0b079fc955378c15c0483cc upstream. Correct the specified regulator-min-microvolt value for the buck DCDC_REG2 regulator, which is part of the Rockchip RK809 PMIC, in the Pine64 Quartz64 Model B board dts. According to the RK809 datasheet, version 1.01, this regulator is capable of producing voltages as low as 0.5 V on its output, instead of going down to 0.9 V only, which is additionally confirmed by the regulator-min-microvolt values found in the board dts files for the other supported boards that use the same RK809 PMIC. This allows the DVFS to clock the GPU on the Quartz64 Model B below 700 MHz, all the way down to 200 MHz, which saves some power and reduces the amount of generated heat a bit, improving the thermal headroom and possibly improving the bursty CPU and GPU performance on this board. This also eliminates the following warnings in the kernel log: core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000, not supported by regulator panfrost fde60000.gpu: _opp_add: OPP not supported by regulators (200000000) core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000, not supported by regulator panfrost fde60000.gpu: _opp_add: OPP not supported by regulators (300000000) core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000, not supported by regulator panfrost fde60000.gpu: _opp_add: OPP not supported by regulators (400000000) core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000, not supported by regulator panfrost fde60000.gpu: _opp_add: OPP not supported by regulators (600000000) Fixes: dcc8c66bef79 ("arm64: dts: rockchip: add Pine64 Quartz64-B device tree") Cc: stable@vger.kernel.org Reported-By: Diederik de Haas <didi.debian@cknow.org> Signed-off-by: Dragan Simic <dsimic@manjaro.org> Tested-by: Diederik de Haas <didi.debian@cknow.org> Link: https://lore.kernel.org/r/e70742ea2df432bf57b3f7de542d81ca22b0da2f.1716225483.git.dsimic@manjaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d201c92bff90f3d3d0b079fc955378c15c0483cc upstream.

Correct the specified regulator-min-microvolt value for the buck DCDC_REG2
regulator, which is part of the Rockchip RK809 PMIC, in the Pine64 Quartz64
Model B board dts.  According to the RK809 datasheet, version 1.01, this
regulator is capable of producing voltages as low as 0.5 V on its output,
instead of going down to 0.9 V only, which is additionally confirmed by the
regulator-min-microvolt values found in the board dts files for the other
supported boards that use the same RK809 PMIC.

This allows the DVFS to clock the GPU on the Quartz64 Model B below 700 MHz,
all the way down to 200 MHz, which saves some power and reduces the amount of
generated heat a bit, improving the thermal headroom and possibly improving
the bursty CPU and GPU performance on this board.

This also eliminates the following warnings in the kernel log:

  core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000, not supported by regulator
  panfrost fde60000.gpu: _opp_add: OPP not supported by regulators (200000000)
  core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000, not supported by regulator
  panfrost fde60000.gpu: _opp_add: OPP not supported by regulators (300000000)
  core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000, not supported by regulator
  panfrost fde60000.gpu: _opp_add: OPP not supported by regulators (400000000)
  core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000, not supported by regulator
  panfrost fde60000.gpu: _opp_add: OPP not supported by regulators (600000000)

Fixes: dcc8c66bef79 ("arm64: dts: rockchip: add Pine64 Quartz64-B device tree")
Cc: stable@vger.kernel.org
Reported-By: Diederik de Haas <didi.debian@cknow.org>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/e70742ea2df432bf57b3f7de542d81ca22b0da2f.1716225483.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/pseries: Fix scv instruction crash with kexec 2024-07-11T10:47:15+00:00 Nicholas Piggin npiggin@gmail.com 2024-06-25T13:40:47+00:00 c550679d604798d9fed8a5b2bb5693448a25407c commit 21a741eb75f80397e5f7d3739e24d7d75e619011 upstream. kexec on pseries disables AIL (reloc_on_exc), required for scv instruction support, before other CPUs have been shut down. This means they can execute scv instructions after AIL is disabled, which causes an interrupt at an unexpected entry location that crashes the kernel. Change the kexec sequence to disable AIL after other CPUs have been brought down. As a refresher, the real-mode scv interrupt vector is 0x17000, and the fixed-location head code probably couldn't easily deal with implementing such high addresses so it was just decided not to support that interrupt at all. Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions") Cc: stable@vger.kernel.org # v5.9+ Reported-by: Sourabh Jain <sourabhjain@linux.ibm.com> Closes: https://lore.kernel.org/3b4b2943-49ad-4619-b195-bc416f1d1409@linux.ibm.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Gautam Menghani <gautam@linux.ibm.com> Tested-by: Sourabh Jain <sourabhjain@linux.ibm.com> Link: https://msgid.link/20240625134047.298759-1-npiggin@gmail.com Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 21a741eb75f80397e5f7d3739e24d7d75e619011 upstream.

kexec on pseries disables AIL (reloc_on_exc), required for scv
instruction support, before other CPUs have been shut down. This means
they can execute scv instructions after AIL is disabled, which causes an
interrupt at an unexpected entry location that crashes the kernel.

Change the kexec sequence to disable AIL after other CPUs have been
brought down.

As a refresher, the real-mode scv interrupt vector is 0x17000, and the
fixed-location head code probably couldn't easily deal with implementing
such high addresses so it was just decided not to support that interrupt
at all.

Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: stable@vger.kernel.org # v5.9+
Reported-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Closes: https://lore.kernel.org/3b4b2943-49ad-4619-b195-bc416f1d1409@linux.ibm.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Tested-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Link: https://msgid.link/20240625134047.298759-1-npiggin@gmail.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
riscv: kexec: Avoid deadlock in kexec crash path 2024-07-11T10:47:12+00:00 Song Shuai songshuaishuai@tinylab.org 2024-06-26T02:33:16+00:00 653deee48a4682ea17a05b96fb6842795ab5943c [ Upstream commit c562ba719df570c986caf0941fea2449150bcbc4 ] If the kexec crash code is called in the interrupt context, the machine_kexec_mask_interrupts() function will trigger a deadlock while trying to acquire the irqdesc spinlock and then deactivate irqchip in irq_set_irqchip_state() function. Unlike arm64, riscv only requires irq_eoi handler to complete EOI and keeping irq_set_irqchip_state() will only leave this possible deadlock without any use. So we simply remove it. Link: https://lore.kernel.org/linux-riscv/20231208111015.173237-1-songshuaishuai@tinylab.org/ Fixes: b17d19a5314a ("riscv: kexec: Fixup irq controller broken in kexec crash path") Signed-off-by: Song Shuai <songshuaishuai@tinylab.org> Reviewed-by: Ryo Takakura <takakura@valinux.co.jp> Link: https://lore.kernel.org/r/20240626023316.539971-1-songshuaishuai@tinylab.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c562ba719df570c986caf0941fea2449150bcbc4 ]

If the kexec crash code is called in the interrupt context, the
machine_kexec_mask_interrupts() function will trigger a deadlock while
trying to acquire the irqdesc spinlock and then deactivate irqchip in
irq_set_irqchip_state() function.

Unlike arm64, riscv only requires irq_eoi handler to complete EOI and
keeping irq_set_irqchip_state() will only leave this possible deadlock
without any use. So we simply remove it.

Link: https://lore.kernel.org/linux-riscv/20231208111015.173237-1-songshuaishuai@tinylab.org/
Fixes: b17d19a5314a ("riscv: kexec: Fixup irq controller broken in kexec crash path")
Signed-off-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Ryo Takakura <takakura@valinux.co.jp>
Link: https://lore.kernel.org/r/20240626023316.539971-1-songshuaishuai@tinylab.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
KVM: s390: fix LPSWEY handling 2024-07-11T10:47:11+00:00 Christian Borntraeger borntraeger@linux.ibm.com 2024-06-28T16:35:47+00:00 c159afd3b55a10b4fd135457e3bd9315f57c5900 [ Upstream commit 4c6abb7f7b349f00c0f7ed5045bf67759c012892 ] in rare cases, e.g. for injecting a machine check we do intercept all load PSW instructions via ICTL_LPSW. With facility 193 a new variant LPSWEY was added. KVM needs to handle that as well. Fixes: a3efa8429266 ("KVM: s390: gen_facilities: allow facilities 165, 193, 194 and 196") Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Message-ID: <20240628163547.2314-1-borntraeger@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4c6abb7f7b349f00c0f7ed5045bf67759c012892 ]

in rare cases, e.g. for injecting a machine check we do intercept all
load PSW instructions via ICTL_LPSW. With facility 193 a new variant
LPSWEY was added. KVM needs to handle that as well.

Fixes: a3efa8429266 ("KVM: s390: gen_facilities: allow facilities 165, 193, 194 and 196")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-ID: <20240628163547.2314-1-borntraeger@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#" 2024-07-11T10:47:09+00:00 Greg Kurz groug@kaod.org 2021-03-09T18:11:10+00:00 ce8d496786dd029458ea88a3b9911e588f5a0417 [ Upstream commit 8873aab8646194a4446117bb617cc71bddda2dee ] All these commands end up peeking into the PACA using the user originated cpu id as an index. Check the cpu id is valid in order to prevent xmon to crash. Instead of printing an error, this follows the same behavior as the "lp s #" command : ignore the buggy cpu id parameter and fall back to the #-less version of the command. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/161531347060.252863.10490063933688958044.stgit@bahia.lan Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8873aab8646194a4446117bb617cc71bddda2dee ]

All these commands end up peeking into the PACA using the user
originated cpu id as an index. Check the cpu id is valid in order
to prevent xmon to crash. Instead of printing an error, this follows
the same behavior as the "lp s #" command : ignore the buggy cpu id
parameter and fall back to the #-less version of the command.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/161531347060.252863.10490063933688958044.stgit@bahia.lan
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/64: Set _IO_BASE to POISON_POINTER_DELTA not 0 for CONFIG_PCI=n 2024-07-11T10:47:08+00:00 Michael Ellerman mpe@ellerman.id.au 2024-05-03T07:56:19+00:00 9c06fe8cfbdf8106130443f5d1167b019f43fb45 [ Upstream commit be140f1732b523947425aaafbe2e37b41b622d96 ] There is code that builds with calls to IO accessors even when CONFIG_PCI=n, but the actual calls are guarded by runtime checks. If not those calls would be faulting, because the page at virtual address zero is (usually) not mapped into the kernel. As Arnd pointed out, it is possible a large port value could cause the address to be above mmap_min_addr which would then access userspace, which would be a bug. To avoid any such issues, set _IO_BASE to POISON_POINTER_DELTA. That is a value chosen to point into unmapped space between the kernel and userspace, so any access will always fault. Note that on 32-bit POISON_POINTER_DELTA is 0, so the patch only has an effect on 64-bit. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240503075619.394467-2-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit be140f1732b523947425aaafbe2e37b41b622d96 ]

There is code that builds with calls to IO accessors even when
CONFIG_PCI=n, but the actual calls are guarded by runtime checks.

If not those calls would be faulting, because the page at virtual
address zero is (usually) not mapped into the kernel. As Arnd pointed
out, it is possible a large port value could cause the address to be
above mmap_min_addr which would then access userspace, which would be
a bug.

To avoid any such issues, set _IO_BASE to POISON_POINTER_DELTA. That
is a value chosen to point into unmapped space between the kernel and
userspace, so any access will always fault.

Note that on 32-bit POISON_POINTER_DELTA is 0, so the patch only has an
effect on 64-bit.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240503075619.394467-2-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc: Avoid nmi_enter/nmi_exit in real mode interrupt. 2024-07-11T10:47:05+00:00 Mahesh Salgaonkar mahesh@linux.ibm.com 2024-04-10T04:30:06+00:00 8d3f83dfb23674540c827a8d65fba20aa300b252 [ Upstream commit 0db880fc865ffb522141ced4bfa66c12ab1fbb70 ] nmi_enter()/nmi_exit() touches per cpu variables which can lead to kernel crash when invoked during real mode interrupt handling (e.g. early HMI/MCE interrupt handler) if percpu allocation comes from vmalloc area. Early HMI/MCE handlers are called through DEFINE_INTERRUPT_HANDLER_NMI() wrapper which invokes nmi_enter/nmi_exit calls. We don't see any issue when percpu allocation is from the embedded first chunk. However with CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK enabled there are chances where percpu allocation can come from the vmalloc area. With kernel command line "percpu_alloc=page" we can force percpu allocation to come from vmalloc area and can see kernel crash in machine_check_early: [ 1.215714] NIP [c000000000e49eb4] rcu_nmi_enter+0x24/0x110 [ 1.215717] LR [c0000000000461a0] machine_check_early+0xf0/0x2c0 [ 1.215719] --- interrupt: 200 [ 1.215720] [c000000fffd73180] [0000000000000000] 0x0 (unreliable) [ 1.215722] [c000000fffd731b0] [0000000000000000] 0x0 [ 1.215724] [c000000fffd73210] [c000000000008364] machine_check_early_common+0x134/0x1f8 Fix this by avoiding use of nmi_enter()/nmi_exit() in real mode if percpu first chunk is not embedded. Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Shirisha Ganta <shirisha@linux.ibm.com> Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240410043006.81577-1-mahesh@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0db880fc865ffb522141ced4bfa66c12ab1fbb70 ]

nmi_enter()/nmi_exit() touches per cpu variables which can lead to kernel
crash when invoked during real mode interrupt handling (e.g. early HMI/MCE
interrupt handler) if percpu allocation comes from vmalloc area.

Early HMI/MCE handlers are called through DEFINE_INTERRUPT_HANDLER_NMI()
wrapper which invokes nmi_enter/nmi_exit calls. We don't see any issue when
percpu allocation is from the embedded first chunk. However with
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK enabled there are chances where percpu
allocation can come from the vmalloc area.

With kernel command line "percpu_alloc=page" we can force percpu allocation
to come from vmalloc area and can see kernel crash in machine_check_early:

[    1.215714] NIP [c000000000e49eb4] rcu_nmi_enter+0x24/0x110
[    1.215717] LR [c0000000000461a0] machine_check_early+0xf0/0x2c0
[    1.215719] --- interrupt: 200
[    1.215720] [c000000fffd73180] [0000000000000000] 0x0 (unreliable)
[    1.215722] [c000000fffd731b0] [0000000000000000] 0x0
[    1.215724] [c000000fffd73210] [c000000000008364] machine_check_early_common+0x134/0x1f8

Fix this by avoiding use of nmi_enter()/nmi_exit() in real mode if percpu
first chunk is not embedded.

Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Shirisha Ganta <shirisha@linux.ibm.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240410043006.81577-1-mahesh@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
arm64: dts: rockchip: Add sound-dai-cells for RK3368 2024-07-05T07:32:01+00:00 Alex Bee knaerzche@gmail.com 2024-06-23T09:01:15+00:00 16d92a6dfa299a076a961fd1e5fe356acdb916fb [ Upstream commit 8d7ec44aa5d1eb94a30319074762a1740440cdc8 ] Add the missing #sound-dai-cells for RK3368's I2S and S/PDIF controllers. Fixes: f7d89dfe1e31 ("arm64: dts: rockchip: add i2s nodes support for RK3368 SoCs") Fixes: 0328d68ea76d ("arm64: dts: rockchip: add rk3368 spdif node") Signed-off-by: Alex Bee <knaerzche@gmail.com> Link: https://lore.kernel.org/r/20240623090116.670607-4-knaerzche@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8d7ec44aa5d1eb94a30319074762a1740440cdc8 ]

Add the missing #sound-dai-cells for RK3368's I2S and S/PDIF controllers.

Fixes: f7d89dfe1e31 ("arm64: dts: rockchip: add i2s nodes support for RK3368 SoCs")
Fixes: 0328d68ea76d ("arm64: dts: rockchip: add rk3368 spdif node")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20240623090116.670607-4-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
arm64: dts: rockchip: fix PMIC interrupt pin on ROCK Pi E 2024-07-05T07:32:01+00:00 FUKAUMI Naoki naoki@radxa.com 2024-06-19T05:00:46+00:00 4e66009d35ccbfebe7b04140517e87313def7172 [ Upstream commit 02afd3d5b9fa4ffed284c0f7e7bec609097804fc ] use GPIO0_A2 as interrupt pin for PMIC. GPIO2_A6 was used for pre-production board. Fixes: b918e81f2145 ("arm64: dts: rockchip: rk3328: Add Radxa ROCK Pi E") Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://lore.kernel.org/r/20240619050047.1217-1-naoki@radxa.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 02afd3d5b9fa4ffed284c0f7e7bec609097804fc ]

use GPIO0_A2 as interrupt pin for PMIC. GPIO2_A6 was used for
pre-production board.

Fixes: b918e81f2145 ("arm64: dts: rockchip: rk3328: Add Radxa ROCK Pi E")
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20240619050047.1217-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: rockchip: rk3066a: add #sound-dai-cells to hdmi node 2024-07-05T07:32:01+00:00 Johan Jonker jbx6244@gmail.com 2024-06-13T18:08:10+00:00 2581e814d751e03e405e5adacdea389080440a7b [ Upstream commit cca46f811d0000c1522a5e18ea48c27a15e45c05 ] '#sound-dai-cells' is required to properly interpret the list of DAI specified in the 'sound-dai' property, so add them to the 'hdmi' node for 'rk3066a.dtsi'. Fixes: fadc78062477 ("ARM: dts: rockchip: add rk3066 hdmi nodes") Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/8b229dcc-94e4-4bbc-9efc-9d5ddd694532@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit cca46f811d0000c1522a5e18ea48c27a15e45c05 ]

'#sound-dai-cells' is required to properly interpret
the list of DAI specified in the 'sound-dai' property,
so add them to the 'hdmi' node for 'rk3066a.dtsi'.

Fixes: fadc78062477 ("ARM: dts: rockchip: add rk3066 hdmi nodes")
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/8b229dcc-94e4-4bbc-9efc-9d5ddd694532@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>