linux.git/block/blk-settings.c, branch v4.14.49

block: Warn if blk_queue_rq_timed_out() is called for a blk-mq queue

2017-08-23T18:02:30+00:00

The timeout handler set by blk_queue_rq_timed_out() is only used
in single queue mode. Calling this function for blk-mq drivers is
wrong. Hence issue a warning if this function is called by a blk-mq
driver.

Signed-off-by: Bart Van Assche 
Cc: Christoph Hellwig 
Cc: Hannes Reinecke 
Cc: Johannes Thumshirn 
Signed-off-by: Jens Axboe

block: don't bother with bounce limits for make_request drivers

2017-06-27T18:13:45+00:00

We only call blk_queue_bounce for request-based drivers, so stop messing
with it for make_request based drivers.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

block: remove the discard_zeroes_data flag

2017-04-08T17:25:38+00:00

Now that we use the proper REQ_OP_WRITE_ZEROES operation everywhere we can
kill this hack.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Martin K. Petersen 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Jens Axboe

block: optionally merge discontiguous discard bios into a single request

2017-02-08T20:43:08+00:00

Add a new merge strategy that merges discard bios into a request until the
maximum number of discard ranges (or the maximum discard size) is reached
from the plug merging code.  I/O scheduler merging is not wired up yet
but might also be useful, although not for fast devices like NVMe which
are the only user for now.

Note that for now we don't support limiting the size of each discard range,
but if needed that can be added later.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

block: Use pointer to backing_dev_info from request_queue

2017-02-02T15:20:48+00:00

We will want to have struct backing_dev_info allocated separately from
struct request_queue. As the first step add pointer to backing_dev_info
to request_queue and convert all users touching it. No functional
changes in this patch.

Reviewed-by: Christoph Hellwig 
Signed-off-by: Jan Kara 
Signed-off-by: Jens Axboe

Merge branch 'for-4.10/block' of git://git.kernel.dk/linux-block

2016-12-13T18:19:16+00:00

Pull block layer updates from Jens Axboe:
 "This is the main block pull request this series. Contrary to previous
  release, I've kept the core and driver changes in the same branch. We
  always ended up having dependencies between the two for obvious
  reasons, so makes more sense to keep them together. That said, I'll
  probably try and keep more topical branches going forward, especially
  for cycles that end up being as busy as this one.

  The major parts of this pull request is:

   - Improved support for O_DIRECT on block devices, with a small
     private implementation instead of using the pig that is
     fs/direct-io.c. From Christoph.

   - Request completion tracking in a scalable fashion. This is utilized
     by two components in this pull, the new hybrid polling and the
     writeback queue throttling code.

   - Improved support for polling with O_DIRECT, adding a hybrid mode
     that combines pure polling with an initial sleep. From me.

   - Support for automatic throttling of writeback queues on the block
     side. This uses feedback from the device completion latencies to
     scale the queue on the block side up or down. From me.

   - Support from SMR drives in the block layer and for SD. From Hannes
     and Shaun.

   - Multi-connection support for nbd. From Josef.

   - Cleanup of request and bio flags, so we have a clear split between
     which are bio (or rq) private, and which ones are shared. From
     Christoph.

   - A set of patches from Bart, that improve how we handle queue
     stopping and starting in blk-mq.

   - Support for WRITE_ZEROES from Chaitanya.

   - Lightnvm updates from Javier/Matias.

   - Supoort for FC for the nvme-over-fabrics code. From James Smart.

   - A bunch of fixes from a whole slew of people, too many to name
     here"

* 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits)
  blk-stat: fix a few cases of missing batch flushing
  blk-flush: run the queue when inserting blk-mq flush
  elevator: make the rqhash helpers exported
  blk-mq: abstract out blk_mq_dispatch_rq_list() helper
  blk-mq: add blk_mq_start_stopped_hw_queue()
  block: improve handling of the magic discard payload
  blk-wbt: don't throttle discard or write zeroes
  nbd: use dev_err_ratelimited in io path
  nbd: reset the setup task for NBD_CLEAR_SOCK
  nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME
  nvme-fabrics: Add target support for FC transport
  nvme-fabrics: Add host support for FC transport
  nvme-fabrics: Add FC transport LLDD api definitions
  nvme-fabrics: Add FC transport FC-NVME definitions
  nvme-fabrics: Add FC transport error codes to nvme.h
  Add type 0x28 NVME type code to scsi fc headers
  nvme-fabrics: patch target code in prep for FC transport support
  nvme-fabrics: set sqe.command_id in core not transports
  parser: add u64 number parser
  nvme-rdma: align to generic ib_event logging helper
  ...

mm: don't cap request size based on read-ahead setting

2016-12-13T02:55:08+00:00

We ran into a funky issue, where someone doing 256K buffered reads saw
128K requests at the device level.  Turns out it is read-ahead capping
the request size, since we use 128K as the default setting.  This
doesn't make a lot of sense - if someone is issuing 256K reads, they
should see 256K reads, regardless of the read-ahead setting, if the
underlying device can support a 256K read in a single command.

This patch introduces a bdi hint, io_pages.  This is the soft max IO
size for the lower level, I've hooked it up to the bdev settings here.
Read-ahead is modified to issue the maximum of the user request size,
and the read-ahead max size, but capped to the max request size on the
device side.  The latter is done to avoid reading ahead too much, if the
application asks for a huge read.  With this patch, the kernel behaves
like the application expects.

Link: http://lkml.kernel.org/r/1479498073-8657-1-git-send-email-axboe@fb.com
Signed-off-by: Jens Axboe 
Acked-by: Johannes Weiner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

block: add support for REQ_OP_WRITE_ZEROES

2016-12-01T14:58:40+00:00

This adds a new block layer operation to zero out a range of
LBAs. This allows to implement zeroing for devices that don't use
either discard with a predictable zero pattern or WRITE SAME of zeroes.
The prominent example of that is NVMe with the Write Zeroes command,
but in the future, this should also help with improving the way
zeroing discards work. For this operation, suitable entry is exported in
sysfs which indicate the number of maximum bytes allowed in one
write zeroes operation by the device.

Signed-off-by: Chaitanya Kulkarni 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

block: hook up writeback throttling

2016-11-10T20:53:40+00:00

Enable throttling of buffered writeback to make it a lot
more smooth, and has way less impact on other system activity.
Background writeback should be, by definition, background
activity. The fact that we flush huge bundles of it at the time
means that it potentially has heavy impacts on foreground workloads,
which isn't ideal. We can't easily limit the sizes of writes that
we do, since that would impact file system layout in the presence
of delayed allocation. So just throttle back buffered writeback,
unless someone is waiting for it.

The algorithm for when to throttle takes its inspiration in the
CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors
the minimum latencies of requests over a window of time. In that
window of time, if the minimum latency of any request exceeds a
given target, then a scale count is incremented and the queue depth
is shrunk. The next monitoring window is shrunk accordingly. Unlike
CoDel, if we hit a window that exhibits good behavior, then we
simply increment the scale count and re-calculate the limits for that
scale value. This prevents us from oscillating between a
close-to-ideal value and max all the time, instead remaining in the
windows where we get good behavior.

Unlike CoDel, blk-wb allows the scale count to to negative. This
happens if we primarily have writes going on. Unlike positive
scale counts, this doesn't change the size of the monitoring window.
When the heavy writers finish, blk-bw quickly snaps back to it's
stable state of a zero scale count.

The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency
target to me met. It defaults to 2 msec for non-rotational storage, and
75 msec for rotational storage. Setting this value to '0' disables
blk-wb. Generally, a user would not have to touch this setting.

We don't enable WBT on devices that are managed with CFQ, and have
a non-root block cgroup attached. If we have a proportional share setup
on this particular disk, then the wbt throttling will interfere with
that. We don't have a strong need for wbt for that case, since we will
rely on CFQ doing that for us.

Signed-off-by: Jens Axboe

block: add code to track actual device queue depth

2016-11-05T23:09:53+00:00

For blk-mq, ->nr_requests does track queue depth, at least at init
time. But for the older queue paths, it's simply a soft setting.
On top of that, it's generally larger than the hardware setting
on purpose, to allow backup of requests for merging.

Fill a hole in struct request with a 'queue_depth' member, that
drivers can call to more closely inform the block layer of the
real queue depth.

Signed-off-by: Jens Axboe 
Reviewed-by: Jan Kara