linux.git/block, branch v4.19.255 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git blk-iolatency: Fix inflight count imbalances and IO hangs on offline 2022-06-14T14:59:30+00:00 Tejun Heo tj@kernel.org 2022-05-14T06:55:45+00:00 515d077ee3085ae343b6bea7fd031f9906645f38 commit 8a177a36da6c54c98b8685d4f914cb3637d53c0d upstream. iolatency needs to track the number of inflight IOs per cgroup. As this tracking can be expensive, it is disabled when no cgroup has iolatency configured for the device. To ensure that the inflight counters stay balanced, iolatency_set_limit() freezes the request_queue while manipulating the enabled counter, which ensures that no IO is in flight and thus all counters are zero. Unfortunately, iolatency_set_limit() isn't the only place where the enabled counter is manipulated. iolatency_pd_offline() can also dec the counter and trigger disabling. As this disabling happens without freezing the q, this can easily happen while some IOs are in flight and thus leak the counts. This can be easily demonstrated by turning on iolatency on an one empty cgroup while IOs are in flight in other cgroups and then removing the cgroup. Note that iolatency shouldn't have been enabled elsewhere in the system to ensure that removing the cgroup disables iolatency for the whole device. The following keeps flipping on and off iolatency on sda: echo +io > /sys/fs/cgroup/cgroup.subtree_control while true; do mkdir -p /sys/fs/cgroup/test echo '8:0 target=100000' > /sys/fs/cgroup/test/io.latency sleep 1 rmdir /sys/fs/cgroup/test sleep 1 done and there's concurrent fio generating direct rand reads: fio --name test --filename=/dev/sda --direct=1 --rw=randread \ --runtime=600 --time_based --iodepth=256 --numjobs=4 --bs=4k while monitoring with the following drgn script: while True: for css in css_for_each_descendant_pre(prog['blkcg_root'].css.address_of_()): for pos in hlist_for_each(container_of(css, 'struct blkcg', 'css').blkg_list): blkg = container_of(pos, 'struct blkcg_gq', 'blkcg_node') pd = blkg.pd[prog['blkcg_policy_iolatency'].plid] if pd.value_() == 0: continue iolat = container_of(pd, 'struct iolatency_grp', 'pd') inflight = iolat.rq_wait.inflight.counter.value_() if inflight: print(f'inflight={inflight} {disk_name(blkg.q.disk).decode("utf-8")} ' f'{cgroup_path(css.cgroup).decode("utf-8")}') time.sleep(1) The monitoring output looks like the following: inflight=1 sda /user.slice inflight=1 sda /user.slice ... inflight=14 sda /user.slice inflight=13 sda /user.slice inflight=17 sda /user.slice inflight=15 sda /user.slice inflight=18 sda /user.slice inflight=17 sda /user.slice inflight=20 sda /user.slice inflight=19 sda /user.slice <- fio stopped, inflight stuck at 19 inflight=19 sda /user.slice inflight=19 sda /user.slice If a cgroup with stuck inflight ends up getting throttled, the throttled IOs will never get issued as there's no completion event to wake it up leading to an indefinite hang. This patch fixes the bug by unifying enable handling into a work item which is automatically kicked off from iolatency_set_min_lat_nsec() which is called from both iolatency_set_limit() and iolatency_pd_offline() paths. Punting to a work item is necessary as iolatency_pd_offline() is called under spinlocks while freezing a request_queue requires a sleepable context. This also simplifies the code reducing LOC sans the comments and avoids the unnecessary freezes which were happening whenever a cgroup's latency target is newly set or cleared. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Liu Bo <bo.liu@linux.alibaba.com> Fixes: 8c772a9bfc7c ("blk-iolatency: fix IO hang due to negative inflight counter") Cc: stable@vger.kernel.org # v5.0+ Link: https://lore.kernel.org/r/Yn9ScX6Nx2qIiQQi@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8a177a36da6c54c98b8685d4f914cb3637d53c0d upstream.

iolatency needs to track the number of inflight IOs per cgroup. As this
tracking can be expensive, it is disabled when no cgroup has iolatency
configured for the device. To ensure that the inflight counters stay
balanced, iolatency_set_limit() freezes the request_queue while manipulating
the enabled counter, which ensures that no IO is in flight and thus all
counters are zero.

Unfortunately, iolatency_set_limit() isn't the only place where the enabled
counter is manipulated. iolatency_pd_offline() can also dec the counter and
trigger disabling. As this disabling happens without freezing the q, this
can easily happen while some IOs are in flight and thus leak the counts.

This can be easily demonstrated by turning on iolatency on an one empty
cgroup while IOs are in flight in other cgroups and then removing the
cgroup. Note that iolatency shouldn't have been enabled elsewhere in the
system to ensure that removing the cgroup disables iolatency for the whole
device.

The following keeps flipping on and off iolatency on sda:

  echo +io > /sys/fs/cgroup/cgroup.subtree_control
  while true; do
      mkdir -p /sys/fs/cgroup/test
      echo '8:0 target=100000' > /sys/fs/cgroup/test/io.latency
      sleep 1
      rmdir /sys/fs/cgroup/test
      sleep 1
  done

and there's concurrent fio generating direct rand reads:

  fio --name test --filename=/dev/sda --direct=1 --rw=randread \
      --runtime=600 --time_based --iodepth=256 --numjobs=4 --bs=4k

while monitoring with the following drgn script:

  while True:
    for css in css_for_each_descendant_pre(prog['blkcg_root'].css.address_of_()):
        for pos in hlist_for_each(container_of(css, 'struct blkcg', 'css').blkg_list):
            blkg = container_of(pos, 'struct blkcg_gq', 'blkcg_node')
            pd = blkg.pd[prog['blkcg_policy_iolatency'].plid]
            if pd.value_() == 0:
                continue
            iolat = container_of(pd, 'struct iolatency_grp', 'pd')
            inflight = iolat.rq_wait.inflight.counter.value_()
            if inflight:
                print(f'inflight={inflight} {disk_name(blkg.q.disk).decode("utf-8")} '
                      f'{cgroup_path(css.cgroup).decode("utf-8")}')
    time.sleep(1)

The monitoring output looks like the following:

  inflight=1 sda /user.slice
  inflight=1 sda /user.slice
  ...
  inflight=14 sda /user.slice
  inflight=13 sda /user.slice
  inflight=17 sda /user.slice
  inflight=15 sda /user.slice
  inflight=18 sda /user.slice
  inflight=17 sda /user.slice
  inflight=20 sda /user.slice
  inflight=19 sda /user.slice <- fio stopped, inflight stuck at 19
  inflight=19 sda /user.slice
  inflight=19 sda /user.slice

If a cgroup with stuck inflight ends up getting throttled, the throttled IOs
will never get issued as there's no completion event to wake it up leading
to an indefinite hang.

This patch fixes the bug by unifying enable handling into a work item which
is automatically kicked off from iolatency_set_min_lat_nsec() which is
called from both iolatency_set_limit() and iolatency_pd_offline() paths.
Punting to a work item is necessary as iolatency_pd_offline() is called
under spinlocks while freezing a request_queue requires a sleepable context.

This also simplifies the code reducing LOC sans the comments and avoids the
unnecessary freezes which were happening whenever a cgroup's latency target
is newly set or cleared.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Liu Bo <bo.liu@linux.alibaba.com>
Fixes: 8c772a9bfc7c ("blk-iolatency: fix IO hang due to negative inflight counter")
Cc: stable@vger.kernel.org # v5.0+
Link: https://lore.kernel.org/r/Yn9ScX6Nx2qIiQQi@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
block-map: add __GFP_ZERO flag for alloc_page in function bio_copy_kern 2022-06-06T06:24:21+00:00 Haimin Zhang tcs.kernel@gmail.com 2022-02-16T08:40:38+00:00 18243d8479fd77952bdb6340024169d30b173a40 commit cc8f7fe1f5eab010191aa4570f27641876fa1267 upstream. Add __GFP_ZERO flag for alloc_page in function bio_copy_kern to initialize the buffer of a bio. Signed-off-by: Haimin Zhang <tcs.kernel@gmail.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220216084038.15635-1-tcs.kernel@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> [DP: Backported to 4.19: Manually added __GFP_ZERO flag] Signed-off-by: Dragos-Marian Panait <dragos.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cc8f7fe1f5eab010191aa4570f27641876fa1267 upstream.

Add __GFP_ZERO flag for alloc_page in function bio_copy_kern to initialize
the buffer of a bio.

Signed-off-by: Haimin Zhang <tcs.kernel@gmail.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220216084038.15635-1-tcs.kernel@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[DP: Backported to 4.19: Manually added __GFP_ZERO flag]
Signed-off-by: Dragos-Marian Panait <dragos.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
block/compat_ioctl: fix range check in BLKGETSIZE 2022-04-27T11:39:45+00:00 Khazhismel Kumykov khazhy@google.com 2022-04-14T22:40:56+00:00 ace51abe0f3a92d512440291f8a47e2cb094ca74 commit ccf16413e520164eb718cf8b22a30438da80ff23 upstream. kernel ulong and compat_ulong_t may not be same width. Use type directly to eliminate mismatches. This would result in truncation rather than EFBIG for 32bit mode for large disks. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Khazhismel Kumykov <khazhy@google.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220414224056.2875681-1-khazhy@google.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ccf16413e520164eb718cf8b22a30438da80ff23 upstream.

kernel ulong and compat_ulong_t may not be same width. Use type directly
to eliminate mismatches.

This would result in truncation rather than EFBIG for 32bit mode for
large disks.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220414224056.2875681-1-khazhy@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "Revert "block, bfq: honor already-setup queue merges"" 2022-04-15T12:14:54+00:00 Paolo Valente paolo.valente@linaro.org 2021-11-25T18:15:10+00:00 f990f0985eda59d4f29fc83fcf300c92b1225d39 [ Upstream commit 15729ff8143f8135b03988a100a19e66d7cb7ecd ] A crash [1] happened to be triggered in conjunction with commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq: honor already-setup queue merges""). Yet, the reverted commit was not the one introducing the bug. In fact, it actually triggered a UAF introduced by a different commit, and now fixed by commit d29bd41428cf ("block, bfq: reset last_bfqq_created on group change"). So, there is no point in keeping commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges") out. This commit restores it. [1] https://bugzilla.kernel.org/show_bug.cgi?id=214503 Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20211125181510.15004-1-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 15729ff8143f8135b03988a100a19e66d7cb7ecd ]

A crash [1] happened to be triggered in conjunction with commit
2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The
latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq:
honor already-setup queue merges""). Yet, the reverted commit was not
the one introducing the bug. In fact, it actually triggered a UAF
introduced by a different commit, and now fixed by commit d29bd41428cf
("block, bfq: reset last_bfqq_created on group change").

So, there is no point in keeping commit 2d52c58b9c9b ("block, bfq:
honor already-setup queue merges") out. This commit restores it.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=214503

Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20211125181510.15004-1-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
bfq: fix use-after-free in bfq_dispatch_request 2022-04-15T12:14:54+00:00 Zhang Wensheng zhangwensheng5@huawei.com 2022-03-03T07:03:34+00:00 74e610b5ee0d95e751280567100509eb11517efa [ Upstream commit ab552fcb17cc9e4afe0e4ac4df95fc7b30e8490a ] KASAN reports a use-after-free report when doing normal scsi-mq test [69832.239032] ================================================================== [69832.241810] BUG: KASAN: use-after-free in bfq_dispatch_request+0x1045/0x44b0 [69832.243267] Read of size 8 at addr ffff88802622ba88 by task kworker/3:1H/155 [69832.244656] [69832.245007] CPU: 3 PID: 155 Comm: kworker/3:1H Not tainted 5.10.0-10295-g576c6382529e #8 [69832.246626] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [69832.249069] Workqueue: kblockd blk_mq_run_work_fn [69832.250022] Call Trace: [69832.250541] dump_stack+0x9b/0xce [69832.251232] ? bfq_dispatch_request+0x1045/0x44b0 [69832.252243] print_address_description.constprop.6+0x3e/0x60 [69832.253381] ? __cpuidle_text_end+0x5/0x5 [69832.254211] ? vprintk_func+0x6b/0x120 [69832.254994] ? bfq_dispatch_request+0x1045/0x44b0 [69832.255952] ? bfq_dispatch_request+0x1045/0x44b0 [69832.256914] kasan_report.cold.9+0x22/0x3a [69832.257753] ? bfq_dispatch_request+0x1045/0x44b0 [69832.258755] check_memory_region+0x1c1/0x1e0 [69832.260248] bfq_dispatch_request+0x1045/0x44b0 [69832.261181] ? bfq_bfqq_expire+0x2440/0x2440 [69832.262032] ? blk_mq_delay_run_hw_queues+0xf9/0x170 [69832.263022] __blk_mq_do_dispatch_sched+0x52f/0x830 [69832.264011] ? blk_mq_sched_request_inserted+0x100/0x100 [69832.265101] __blk_mq_sched_dispatch_requests+0x398/0x4f0 [69832.266206] ? blk_mq_do_dispatch_ctx+0x570/0x570 [69832.267147] ? __switch_to+0x5f4/0xee0 [69832.267898] blk_mq_sched_dispatch_requests+0xdf/0x140 [69832.268946] __blk_mq_run_hw_queue+0xc0/0x270 [69832.269840] blk_mq_run_work_fn+0x51/0x60 [69832.278170] process_one_work+0x6d4/0xfe0 [69832.278984] worker_thread+0x91/0xc80 [69832.279726] ? __kthread_parkme+0xb0/0x110 [69832.280554] ? process_one_work+0xfe0/0xfe0 [69832.281414] kthread+0x32d/0x3f0 [69832.282082] ? kthread_park+0x170/0x170 [69832.282849] ret_from_fork+0x1f/0x30 [69832.283573] [69832.283886] Allocated by task 7725: [69832.284599] kasan_save_stack+0x19/0x40 [69832.285385] __kasan_kmalloc.constprop.2+0xc1/0xd0 [69832.286350] kmem_cache_alloc_node+0x13f/0x460 [69832.287237] bfq_get_queue+0x3d4/0x1140 [69832.287993] bfq_get_bfqq_handle_split+0x103/0x510 [69832.289015] bfq_init_rq+0x337/0x2d50 [69832.289749] bfq_insert_requests+0x304/0x4e10 [69832.290634] blk_mq_sched_insert_requests+0x13e/0x390 [69832.291629] blk_mq_flush_plug_list+0x4b4/0x760 [69832.292538] blk_flush_plug_list+0x2c5/0x480 [69832.293392] io_schedule_prepare+0xb2/0xd0 [69832.294209] io_schedule_timeout+0x13/0x80 [69832.295014] wait_for_common_io.constprop.1+0x13c/0x270 [69832.296137] submit_bio_wait+0x103/0x1a0 [69832.296932] blkdev_issue_discard+0xe6/0x160 [69832.297794] blk_ioctl_discard+0x219/0x290 [69832.298614] blkdev_common_ioctl+0x50a/0x1750 [69832.304715] blkdev_ioctl+0x470/0x600 [69832.305474] block_ioctl+0xde/0x120 [69832.306232] vfs_ioctl+0x6c/0xc0 [69832.306877] __se_sys_ioctl+0x90/0xa0 [69832.307629] do_syscall_64+0x2d/0x40 [69832.308362] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [69832.309382] [69832.309701] Freed by task 155: [69832.310328] kasan_save_stack+0x19/0x40 [69832.311121] kasan_set_track+0x1c/0x30 [69832.311868] kasan_set_free_info+0x1b/0x30 [69832.312699] __kasan_slab_free+0x111/0x160 [69832.313524] kmem_cache_free+0x94/0x460 [69832.314367] bfq_put_queue+0x582/0x940 [69832.315112] __bfq_bfqd_reset_in_service+0x166/0x1d0 [69832.317275] bfq_bfqq_expire+0xb27/0x2440 [69832.318084] bfq_dispatch_request+0x697/0x44b0 [69832.318991] __blk_mq_do_dispatch_sched+0x52f/0x830 [69832.319984] __blk_mq_sched_dispatch_requests+0x398/0x4f0 [69832.321087] blk_mq_sched_dispatch_requests+0xdf/0x140 [69832.322225] __blk_mq_run_hw_queue+0xc0/0x270 [69832.323114] blk_mq_run_work_fn+0x51/0x60 [69832.323942] process_one_work+0x6d4/0xfe0 [69832.324772] worker_thread+0x91/0xc80 [69832.325518] kthread+0x32d/0x3f0 [69832.326205] ret_from_fork+0x1f/0x30 [69832.326932] [69832.338297] The buggy address belongs to the object at ffff88802622b968 [69832.338297] which belongs to the cache bfq_queue of size 512 [69832.340766] The buggy address is located 288 bytes inside of [69832.340766] 512-byte region [ffff88802622b968, ffff88802622bb68) [69832.343091] The buggy address belongs to the page: [69832.344097] page:ffffea0000988a00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88802622a528 pfn:0x26228 [69832.346214] head:ffffea0000988a00 order:2 compound_mapcount:0 compound_pincount:0 [69832.347719] flags: 0x1fffff80010200(slab|head) [69832.348625] raw: 001fffff80010200 ffffea0000dbac08 ffff888017a57650 ffff8880179fe840 [69832.354972] raw: ffff88802622a528 0000000000120008 00000001ffffffff 0000000000000000 [69832.356547] page dumped because: kasan: bad access detected [69832.357652] [69832.357970] Memory state around the buggy address: [69832.358926] ffff88802622b980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [69832.360358] ffff88802622ba00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [69832.361810] >ffff88802622ba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [69832.363273] ^ [69832.363975] ffff88802622bb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc [69832.375960] ffff88802622bb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [69832.377405] ================================================================== In bfq_dispatch_requestfunction, it may have function call: bfq_dispatch_request __bfq_dispatch_request bfq_select_queue bfq_bfqq_expire __bfq_bfqd_reset_in_service bfq_put_queue kmem_cache_free In this function call, in_serv_queue has beed expired and meet the conditions to free. In the function bfq_dispatch_request, the address of in_serv_queue pointing to has been released. For getting the value of idle_timer_disabled, it will get flags value from the address which in_serv_queue pointing to, then the problem of use-after-free happens; Fix the problem by check in_serv_queue == bfqd->in_service_queue, to get the value of idle_timer_disabled if in_serve_queue is equel to bfqd->in_service_queue. If the space of in_serv_queue pointing has been released, this judge will aviod use-after-free problem. And if in_serv_queue may be expired or finished, the idle_timer_disabled will be false which would not give effects to bfq_update_dispatch_stats. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Wensheng <zhangwensheng5@huawei.com> Link: https://lore.kernel.org/r/20220303070334.3020168-1-zhangwensheng5@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ab552fcb17cc9e4afe0e4ac4df95fc7b30e8490a ]

KASAN reports a use-after-free report when doing normal scsi-mq test

[69832.239032] ==================================================================
[69832.241810] BUG: KASAN: use-after-free in bfq_dispatch_request+0x1045/0x44b0
[69832.243267] Read of size 8 at addr ffff88802622ba88 by task kworker/3:1H/155
[69832.244656]
[69832.245007] CPU: 3 PID: 155 Comm: kworker/3:1H Not tainted 5.10.0-10295-g576c6382529e #8
[69832.246626] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[69832.249069] Workqueue: kblockd blk_mq_run_work_fn
[69832.250022] Call Trace:
[69832.250541]  dump_stack+0x9b/0xce
[69832.251232]  ? bfq_dispatch_request+0x1045/0x44b0
[69832.252243]  print_address_description.constprop.6+0x3e/0x60
[69832.253381]  ? __cpuidle_text_end+0x5/0x5
[69832.254211]  ? vprintk_func+0x6b/0x120
[69832.254994]  ? bfq_dispatch_request+0x1045/0x44b0
[69832.255952]  ? bfq_dispatch_request+0x1045/0x44b0
[69832.256914]  kasan_report.cold.9+0x22/0x3a
[69832.257753]  ? bfq_dispatch_request+0x1045/0x44b0
[69832.258755]  check_memory_region+0x1c1/0x1e0
[69832.260248]  bfq_dispatch_request+0x1045/0x44b0
[69832.261181]  ? bfq_bfqq_expire+0x2440/0x2440
[69832.262032]  ? blk_mq_delay_run_hw_queues+0xf9/0x170
[69832.263022]  __blk_mq_do_dispatch_sched+0x52f/0x830
[69832.264011]  ? blk_mq_sched_request_inserted+0x100/0x100
[69832.265101]  __blk_mq_sched_dispatch_requests+0x398/0x4f0
[69832.266206]  ? blk_mq_do_dispatch_ctx+0x570/0x570
[69832.267147]  ? __switch_to+0x5f4/0xee0
[69832.267898]  blk_mq_sched_dispatch_requests+0xdf/0x140
[69832.268946]  __blk_mq_run_hw_queue+0xc0/0x270
[69832.269840]  blk_mq_run_work_fn+0x51/0x60
[69832.278170]  process_one_work+0x6d4/0xfe0
[69832.278984]  worker_thread+0x91/0xc80
[69832.279726]  ? __kthread_parkme+0xb0/0x110
[69832.280554]  ? process_one_work+0xfe0/0xfe0
[69832.281414]  kthread+0x32d/0x3f0
[69832.282082]  ? kthread_park+0x170/0x170
[69832.282849]  ret_from_fork+0x1f/0x30
[69832.283573]
[69832.283886] Allocated by task 7725:
[69832.284599]  kasan_save_stack+0x19/0x40
[69832.285385]  __kasan_kmalloc.constprop.2+0xc1/0xd0
[69832.286350]  kmem_cache_alloc_node+0x13f/0x460
[69832.287237]  bfq_get_queue+0x3d4/0x1140
[69832.287993]  bfq_get_bfqq_handle_split+0x103/0x510
[69832.289015]  bfq_init_rq+0x337/0x2d50
[69832.289749]  bfq_insert_requests+0x304/0x4e10
[69832.290634]  blk_mq_sched_insert_requests+0x13e/0x390
[69832.291629]  blk_mq_flush_plug_list+0x4b4/0x760
[69832.292538]  blk_flush_plug_list+0x2c5/0x480
[69832.293392]  io_schedule_prepare+0xb2/0xd0
[69832.294209]  io_schedule_timeout+0x13/0x80
[69832.295014]  wait_for_common_io.constprop.1+0x13c/0x270
[69832.296137]  submit_bio_wait+0x103/0x1a0
[69832.296932]  blkdev_issue_discard+0xe6/0x160
[69832.297794]  blk_ioctl_discard+0x219/0x290
[69832.298614]  blkdev_common_ioctl+0x50a/0x1750
[69832.304715]  blkdev_ioctl+0x470/0x600
[69832.305474]  block_ioctl+0xde/0x120
[69832.306232]  vfs_ioctl+0x6c/0xc0
[69832.306877]  __se_sys_ioctl+0x90/0xa0
[69832.307629]  do_syscall_64+0x2d/0x40
[69832.308362]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[69832.309382]
[69832.309701] Freed by task 155:
[69832.310328]  kasan_save_stack+0x19/0x40
[69832.311121]  kasan_set_track+0x1c/0x30
[69832.311868]  kasan_set_free_info+0x1b/0x30
[69832.312699]  __kasan_slab_free+0x111/0x160
[69832.313524]  kmem_cache_free+0x94/0x460
[69832.314367]  bfq_put_queue+0x582/0x940
[69832.315112]  __bfq_bfqd_reset_in_service+0x166/0x1d0
[69832.317275]  bfq_bfqq_expire+0xb27/0x2440
[69832.318084]  bfq_dispatch_request+0x697/0x44b0
[69832.318991]  __blk_mq_do_dispatch_sched+0x52f/0x830
[69832.319984]  __blk_mq_sched_dispatch_requests+0x398/0x4f0
[69832.321087]  blk_mq_sched_dispatch_requests+0xdf/0x140
[69832.322225]  __blk_mq_run_hw_queue+0xc0/0x270
[69832.323114]  blk_mq_run_work_fn+0x51/0x60
[69832.323942]  process_one_work+0x6d4/0xfe0
[69832.324772]  worker_thread+0x91/0xc80
[69832.325518]  kthread+0x32d/0x3f0
[69832.326205]  ret_from_fork+0x1f/0x30
[69832.326932]
[69832.338297] The buggy address belongs to the object at ffff88802622b968
[69832.338297]  which belongs to the cache bfq_queue of size 512
[69832.340766] The buggy address is located 288 bytes inside of
[69832.340766]  512-byte region [ffff88802622b968, ffff88802622bb68)
[69832.343091] The buggy address belongs to the page:
[69832.344097] page:ffffea0000988a00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88802622a528 pfn:0x26228
[69832.346214] head:ffffea0000988a00 order:2 compound_mapcount:0 compound_pincount:0
[69832.347719] flags: 0x1fffff80010200(slab|head)
[69832.348625] raw: 001fffff80010200 ffffea0000dbac08 ffff888017a57650 ffff8880179fe840
[69832.354972] raw: ffff88802622a528 0000000000120008 00000001ffffffff 0000000000000000
[69832.356547] page dumped because: kasan: bad access detected
[69832.357652]
[69832.357970] Memory state around the buggy address:
[69832.358926]  ffff88802622b980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.360358]  ffff88802622ba00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.361810] >ffff88802622ba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.363273]                       ^
[69832.363975]  ffff88802622bb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
[69832.375960]  ffff88802622bb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[69832.377405] ==================================================================

In bfq_dispatch_requestfunction, it may have function call:

bfq_dispatch_request
	__bfq_dispatch_request
		bfq_select_queue
			bfq_bfqq_expire
				__bfq_bfqd_reset_in_service
					bfq_put_queue
						kmem_cache_free
In this function call, in_serv_queue has beed expired and meet the
conditions to free. In the function bfq_dispatch_request, the address
of in_serv_queue pointing to has been released. For getting the value
of idle_timer_disabled, it will get flags value from the address which
in_serv_queue pointing to, then the problem of use-after-free happens;

Fix the problem by check in_serv_queue == bfqd->in_service_queue, to
get the value of idle_timer_disabled if in_serve_queue is equel to
bfqd->in_service_queue. If the space of in_serv_queue pointing has
been released, this judge will aviod use-after-free problem.
And if in_serv_queue may be expired or finished, the idle_timer_disabled
will be false which would not give effects to bfq_update_dispatch_stats.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Wensheng <zhangwensheng5@huawei.com>
Link: https://lore.kernel.org/r/20220303070334.3020168-1-zhangwensheng5@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
block: don't delete queue kobject before its children 2022-04-15T12:14:43+00:00 Eric Biggers ebiggers@google.com 2022-01-24T21:59:37+00:00 b2001eb10f59363da930cdd6e086a2861986fa18 [ Upstream commit 0f69288253e9fc7c495047720e523b9f1aba5712 ] kobjects aren't supposed to be deleted before their child kobjects are deleted. Apparently this is usually benign; however, a WARN will be triggered if one of the child kobjects has a named attribute group: sysfs group 'modes' not found for kobject 'crypto' WARNING: CPU: 0 PID: 1 at fs/sysfs/group.c:278 sysfs_remove_group+0x72/0x80 ... Call Trace: sysfs_remove_groups+0x29/0x40 fs/sysfs/group.c:312 __kobject_del+0x20/0x80 lib/kobject.c:611 kobject_cleanup+0xa4/0x140 lib/kobject.c:696 kobject_release lib/kobject.c:736 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x53/0x70 lib/kobject.c:753 blk_crypto_sysfs_unregister+0x10/0x20 block/blk-crypto-sysfs.c:159 blk_unregister_queue+0xb0/0x110 block/blk-sysfs.c:962 del_gendisk+0x117/0x250 block/genhd.c:610 Fix this by moving the kobject_del() and the corresponding kobject_uevent() to the correct place. Fixes: 2c2086afc2b8 ("block: Protect less code with sysfs_lock in blk_{un,}register_queue()") Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220124215938.2769-3-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0f69288253e9fc7c495047720e523b9f1aba5712 ]

kobjects aren't supposed to be deleted before their child kobjects are
deleted.  Apparently this is usually benign; however, a WARN will be
triggered if one of the child kobjects has a named attribute group:

    sysfs group 'modes' not found for kobject 'crypto'
    WARNING: CPU: 0 PID: 1 at fs/sysfs/group.c:278 sysfs_remove_group+0x72/0x80
    ...
    Call Trace:
      sysfs_remove_groups+0x29/0x40 fs/sysfs/group.c:312
      __kobject_del+0x20/0x80 lib/kobject.c:611
      kobject_cleanup+0xa4/0x140 lib/kobject.c:696
      kobject_release lib/kobject.c:736 [inline]
      kref_put include/linux/kref.h:65 [inline]
      kobject_put+0x53/0x70 lib/kobject.c:753
      blk_crypto_sysfs_unregister+0x10/0x20 block/blk-crypto-sysfs.c:159
      blk_unregister_queue+0xb0/0x110 block/blk-sysfs.c:962
      del_gendisk+0x117/0x250 block/genhd.c:610

Fix this by moving the kobject_del() and the corresponding
kobject_uevent() to the correct place.

Fixes: 2c2086afc2b8 ("block: Protect less code with sysfs_lock in blk_{un,}register_queue()")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220124215938.2769-3-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
block: don't merge across cgroup boundaries if blkcg is enabled 2022-04-15T12:14:41+00:00 Tejun Heo tj@kernel.org 2022-03-15T00:30:11+00:00 6281beee5bb9c6d1756080052a9f989d387cf466 commit 6b2b04590b51aa4cf395fcd185ce439cab5961dc upstream. blk-iocost and iolatency are cgroup aware rq-qos policies but they didn't disable merges across different cgroups. This obviously can lead to accounting and control errors but more importantly to priority inversions - e.g. an IO which belongs to a higher priority cgroup or IO class may end up getting throttled incorrectly because it gets merged to an IO issued from a low priority cgroup. Fix it by adding blk_cgroup_mergeable() which is called from merge paths and rejects cross-cgroup and cross-issue_as_root merges. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: d70675121546 ("block: introduce blk-iolatency io controller") Cc: stable@vger.kernel.org # v4.19+ Cc: Josef Bacik <jbacik@fb.com> Link: https://lore.kernel.org/r/Yi/eE/6zFNyWJ+qd@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6b2b04590b51aa4cf395fcd185ce439cab5961dc upstream.

blk-iocost and iolatency are cgroup aware rq-qos policies but they didn't
disable merges across different cgroups. This obviously can lead to
accounting and control errors but more importantly to priority inversions -
e.g. an IO which belongs to a higher priority cgroup or IO class may end up
getting throttled incorrectly because it gets merged to an IO issued from a
low priority cgroup.

Fix it by adding blk_cgroup_mergeable() which is called from merge paths and
rejects cross-cgroup and cross-issue_as_root merges.

Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: d70675121546 ("block: introduce blk-iolatency io controller")
Cc: stable@vger.kernel.org # v4.19+
Cc: Josef Bacik <jbacik@fb.com>
Link: https://lore.kernel.org/r/Yi/eE/6zFNyWJ+qd@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
block: Fix fsync always failed if once failed 2022-03-08T18:04:08+00:00 Ye Bin yebin10@huawei.com 2021-11-29T01:26:59+00:00 6a139c9ec5082b43d0f32c5cb5d68e7a3792d409 commit 8a7518931baa8ea023700987f3db31cb0a80610b upstream. We do test with inject error fault base on v4.19, after test some time we found sync /dev/sda always failed. [root@localhost] sync /dev/sda sync: error syncing '/dev/sda': Input/output error scsi log as follows: [19069.812296] sd 0:0:0:0: [sda] tag#64 Send: scmd 0x00000000d03a0b6b [19069.812302] sd 0:0:0:0: [sda] tag#64 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00 [19069.812533] sd 0:0:0:0: [sda] tag#64 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK [19069.812536] sd 0:0:0:0: [sda] tag#64 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00 [19069.812539] sd 0:0:0:0: [sda] tag#64 scsi host busy 1 failed 0 [19069.812542] sd 0:0:0:0: Notifying upper driver of completion (result 0) [19069.812546] sd 0:0:0:0: [sda] tag#64 sd_done: completed 0 of 0 bytes [19069.812549] sd 0:0:0:0: [sda] tag#64 0 sectors total, 0 bytes done. [19069.812564] print_req_error: I/O error, dev sda, sector 0 ftrace log as follows: rep-306069 [007] .... 19654.923315: block_bio_queue: 8,0 FWS 0 + 0 [rep] rep-306069 [007] .... 19654.923333: block_getrq: 8,0 FWS 0 + 0 [rep] kworker/7:1H-250 [007] .... 19654.923352: block_rq_issue: 8,0 FF 0 () 0 + 0 [kworker/7:1H] <idle>-0 [007] ..s. 19654.923562: block_rq_complete: 8,0 FF () 18446744073709551615 + 0 [0] <idle>-0 [007] d.s. 19654.923576: block_rq_complete: 8,0 WS () 0 + 0 [-5] As 8d6996630c03 introduce 'fq->rq_status', this data only update when 'flush_rq' reference count isn't zero. If flush request once failed and record error code in 'fq->rq_status'. If there is no chance to update 'fq->rq_status',then do fsync will always failed. To address this issue reset 'fq->rq_status' after return error code to upper layer. Fixes: 8d6996630c03("block: fix null pointer dereference in blk_mq_rq_timed_out()") Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20211129012659.1553733-1-yebin10@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> [sudip: adjust context] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8a7518931baa8ea023700987f3db31cb0a80610b upstream.

We do test with inject error fault base on v4.19, after test some time we found
sync /dev/sda always failed.
[root@localhost] sync /dev/sda
sync: error syncing '/dev/sda': Input/output error

scsi log as follows:
[19069.812296] sd 0:0:0:0: [sda] tag#64 Send: scmd 0x00000000d03a0b6b
[19069.812302] sd 0:0:0:0: [sda] tag#64 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[19069.812533] sd 0:0:0:0: [sda] tag#64 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK
[19069.812536] sd 0:0:0:0: [sda] tag#64 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[19069.812539] sd 0:0:0:0: [sda] tag#64 scsi host busy 1 failed 0
[19069.812542] sd 0:0:0:0: Notifying upper driver of completion (result 0)
[19069.812546] sd 0:0:0:0: [sda] tag#64 sd_done: completed 0 of 0 bytes
[19069.812549] sd 0:0:0:0: [sda] tag#64 0 sectors total, 0 bytes done.
[19069.812564] print_req_error: I/O error, dev sda, sector 0

ftrace log as follows:
 rep-306069 [007] .... 19654.923315: block_bio_queue: 8,0 FWS 0 + 0 [rep]
 rep-306069 [007] .... 19654.923333: block_getrq: 8,0 FWS 0 + 0 [rep]
 kworker/7:1H-250   [007] .... 19654.923352: block_rq_issue: 8,0 FF 0 () 0 + 0 [kworker/7:1H]
 <idle>-0     [007] ..s. 19654.923562: block_rq_complete: 8,0 FF () 18446744073709551615 + 0 [0]
 <idle>-0     [007] d.s. 19654.923576: block_rq_complete: 8,0 WS () 0 + 0 [-5]

As 8d6996630c03 introduce 'fq->rq_status', this data only update when 'flush_rq'
reference count isn't zero. If flush request once failed and record error code
in 'fq->rq_status'. If there is no chance to update 'fq->rq_status',then do fsync
will always failed.
To address this issue reset 'fq->rq_status' after return error code to upper layer.

Fixes: 8d6996630c03("block: fix null pointer dereference in blk_mq_rq_timed_out()")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211129012659.1553733-1-yebin10@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
block/wbt: fix negative inflight counter when remove scsi device 2022-02-23T10:58:40+00:00 Laibin Qiu qiulaibin@huawei.com 2022-01-22T11:10:45+00:00 38c7f8c0599a04547f9be3be66e7b7e64d71c918 commit e92bc4cd34de2ce454bdea8cd198b8067ee4e123 upstream. Now that we disable wbt by set WBT_STATE_OFF_DEFAULT in wbt_disable_default() when switch elevator to bfq. And when we remove scsi device, wbt will be enabled by wbt_enable_default. If it become false positive between wbt_wait() and wbt_track() when submit write request. The following is the scenario that triggered the problem. T1 T2 T3 elevator_switch_mq bfq_init_queue wbt_disable_default <= Set rwb->enable_state (OFF) Submit_bio blk_mq_make_request rq_qos_throttle <= rwb->enable_state (OFF) scsi_remove_device sd_remove del_gendisk blk_unregister_queue elv_unregister_queue wbt_enable_default <= Set rwb->enable_state (ON) q_qos_track <= rwb->enable_state (ON) ^^^^^^ this request will mark WBT_TRACKED without inflight add and will lead to drop rqw->inflight to -1 in wbt_done() which will trigger IO hung. Fix this by move wbt_enable_default() from elv_unregister to bfq_exit_queue(). Only re-enable wbt when bfq exit. Fixes: 76a8040817b4b ("blk-wbt: make sure throttle is enabled properly") Remove oneline stale comment, and kill one oneshot local variable. Signed-off-by: Ming Lei <ming.lei@rehdat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/linux-block/20211214133103.551813-1-qiulaibin@huawei.com/ Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e92bc4cd34de2ce454bdea8cd198b8067ee4e123 upstream.

Now that we disable wbt by set WBT_STATE_OFF_DEFAULT in
wbt_disable_default() when switch elevator to bfq. And when
we remove scsi device, wbt will be enabled by wbt_enable_default.
If it become false positive between wbt_wait() and wbt_track()
when submit write request.

The following is the scenario that triggered the problem.

T1                          T2                           T3
                            elevator_switch_mq
                            bfq_init_queue
                            wbt_disable_default <= Set
                            rwb->enable_state (OFF)
Submit_bio
blk_mq_make_request
rq_qos_throttle
<= rwb->enable_state (OFF)
                                                         scsi_remove_device
                                                         sd_remove
                                                         del_gendisk
                                                         blk_unregister_queue
                                                         elv_unregister_queue
                                                         wbt_enable_default
                                                         <= Set rwb->enable_state (ON)
q_qos_track
<= rwb->enable_state (ON)
^^^^^^ this request will mark WBT_TRACKED without inflight add and will
lead to drop rqw->inflight to -1 in wbt_done() which will trigger IO hung.

Fix this by move wbt_enable_default() from elv_unregister to
bfq_exit_queue(). Only re-enable wbt when bfq exit.

Fixes: 76a8040817b4b ("blk-wbt: make sure throttle is enabled properly")

Remove oneline stale comment, and kill one oneshot local variable.

Signed-off-by: Ming Lei <ming.lei@rehdat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-block/20211214133103.551813-1-qiulaibin@huawei.com/
Signed-off-by: Laibin Qiu <qiulaibin@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
block: bio-integrity: Advance seed correctly for larger interval sizes 2022-02-08T17:23:14+00:00 Martin K. Petersen martin.petersen@oracle.com 2022-02-04T03:42:09+00:00 d21b6bbc78442bf490e7215ed620ec0878856a0e commit b13e0c71856817fca67159b11abac350e41289f5 upstream. Commit 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update integrity seed") added code to update the integrity seed value when advancing a bio. However, it failed to take into account that the integrity interval might be larger than the 512-byte block layer sector size. This broke bio splitting on PI devices with 4KB logical blocks. The seed value should be advanced by bio_integrity_intervals() and not the number of sectors. Cc: Dmitry Monakhov <dmonakhov@openvz.org> Cc: stable@vger.kernel.org Fixes: 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update integrity seed") Tested-by: Dmitry Ivanov <dmitry.ivanov2@hpe.com> Reported-by: Alexey Lyashkov <alexey.lyashkov@hpe.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20220204034209.4193-1-martin.petersen@oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b13e0c71856817fca67159b11abac350e41289f5 upstream.

Commit 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update
integrity seed") added code to update the integrity seed value when
advancing a bio. However, it failed to take into account that the
integrity interval might be larger than the 512-byte block layer
sector size. This broke bio splitting on PI devices with 4KB logical
blocks.

The seed value should be advanced by bio_integrity_intervals() and not
the number of sectors.

Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: stable@vger.kernel.org
Fixes: 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update integrity seed")
Tested-by: Dmitry Ivanov <dmitry.ivanov2@hpe.com>
Reported-by: Alexey Lyashkov <alexey.lyashkov@hpe.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220204034209.4193-1-martin.petersen@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>