linux.git/block, branch v5.17.6 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Revert "block: inherit request start time from bio for BLK_CGROUP" 2022-05-09T07:16:29+00:00 Tejun Heo tj@kernel.org 2022-04-27T19:49:12+00:00 290ca230b81b0de657c38284aadcdf60db034f74 commit 4cddeacad6d4b23493a108d0705e7d2ab89ba5a3 upstream. This reverts commit 0006707723233cb2a9a23ca19fc3d0864835704c. It has a couple problems: * bio_issue_time() is stored in bio->bi_issue truncated to 51 bits. This overflows in slightly over 26 days. Setting rq->io_start_time_ns with it means that io duration calculation would yield >26days after 26 days of uptime. This, for example, confuses kyber making it cause high IO latencies. * rq->io_start_time_ns should record the time that the IO is issued to the device so that on-device latency can be measured. However, bio_issue_time() is set before the bio goes through the rq-qos controllers (wbt, iolatency, iocost), so when the bio gets throttled in any of the mechanisms, the measured latencies make no sense - on-device latencies end up higher than request-alloc-to-completion latencies. We'll need a smarter way to avoid calling ktime_get_ns() repeatedly back-to-back. For now, let's revert the commit. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org # v5.16+ Link: https://lore.kernel.org/r/YmmeOLfo5lzc+8yI@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4cddeacad6d4b23493a108d0705e7d2ab89ba5a3 upstream.

This reverts commit 0006707723233cb2a9a23ca19fc3d0864835704c. It has a
couple problems:

* bio_issue_time() is stored in bio->bi_issue truncated to 51 bits. This
  overflows in slightly over 26 days. Setting rq->io_start_time_ns with it
  means that io duration calculation would yield >26days after 26 days of
  uptime. This, for example, confuses kyber making it cause high IO
  latencies.

* rq->io_start_time_ns should record the time that the IO is issued to the
  device so that on-device latency can be measured. However,
  bio_issue_time() is set before the bio goes through the rq-qos controllers
  (wbt, iolatency, iocost), so when the bio gets throttled in any of the
  mechanisms, the measured latencies make no sense - on-device latencies end
  up higher than request-alloc-to-completion latencies.

We'll need a smarter way to avoid calling ktime_get_ns() repeatedly
back-to-back. For now, let's revert the commit.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v5.16+
Link: https://lore.kernel.org/r/YmmeOLfo5lzc+8yI@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bfq: Fix warning in bfqq_request_over_limit() 2022-05-09T07:16:29+00:00 Jan Kara jack@suse.cz 2022-04-07T14:07:38+00:00 229deb36d1eee86daee46273cdd024098b8954b9 commit 09df6a75fffa68169c5ef9bef990cd7ba94f3eef upstream. People are occasionally reporting a warning bfqq_request_over_limit() triggering reporting that BFQ's idea of cgroup hierarchy (and its depth) does not match what generic blkcg code thinks. This can actually happen when bfqq gets moved between BFQ groups while bfqq_request_over_limit() is running. Make sure the code is safe against BFQ queue being moved to a different BFQ group. Fixes: 76f1df88bbc2 ("bfq: Limit number of requests consumed by each cgroup") CC: stable@vger.kernel.org Link: https://lore.kernel.org/all/CAJCQCtTw_2C7ZSz7as5Gvq=OmnDiio=HRkQekqWpKot84sQhFA@mail.gmail.com/ Reported-by: Chris Murphy <lists@colorremedies.com> Reported-by: "yukuai (C)" <yukuai3@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220407140738.9723-1-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 09df6a75fffa68169c5ef9bef990cd7ba94f3eef upstream.

People are occasionally reporting a warning bfqq_request_over_limit()
triggering reporting that BFQ's idea of cgroup hierarchy (and its depth)
does not match what generic blkcg code thinks. This can actually happen
when bfqq gets moved between BFQ groups while bfqq_request_over_limit()
is running. Make sure the code is safe against BFQ queue being moved to
a different BFQ group.

Fixes: 76f1df88bbc2 ("bfq: Limit number of requests consumed by each cgroup")
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/all/CAJCQCtTw_2C7ZSz7as5Gvq=OmnDiio=HRkQekqWpKot84sQhFA@mail.gmail.com/
Reported-by: Chris Murphy <lists@colorremedies.com>
Reported-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220407140738.9723-1-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iocost: don't reset the inuse weight of under-weighted debtors 2022-05-09T07:16:16+00:00 Tejun Heo tj@kernel.org 2022-04-27T05:01:01+00:00 f877ae5f83c95d5999f695bb81b24dc2925f006b commit 8c936f9ea11ec4e35e288810a7503b5c841a355f upstream. When an iocg is in debt, its inuse weight is owned by debt handling and should stay at 1. This invariant was broken when determining the amount of surpluses at the beginning of donation calculation - when an iocg's hierarchical weight is too low, the iocg is excluded from donation calculation and its inuse is reset to its active regardless of its indebtedness, triggering warnings like the following: WARNING: CPU: 5 PID: 0 at block/blk-iocost.c:1416 iocg_kick_waitq+0x392/0x3a0 ... RIP: 0010:iocg_kick_waitq+0x392/0x3a0 Code: 00 00 be ff ff ff ff 48 89 4d a8 e8 98 b2 70 00 48 8b 4d a8 85 c0 0f 85 4a fe ff ff 0f 0b e9 43 fe ff ff 0f 0b e9 4d fe ff ff <0f> 0b e9 50 fe ff ff e8 a2 ae 70 00 66 90 0f 1f 44 00 00 55 48 89 RSP: 0018:ffffc90000200d08 EFLAGS: 00010016 ... <IRQ> ioc_timer_fn+0x2e0/0x1470 call_timer_fn+0xa1/0x2c0 ... As this happens only when an iocg's hierarchical weight is negligible, its impact likely is limited to triggering the warnings. Fix it by skipping resetting inuse of under-weighted debtors. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Rik van Riel <riel@surriel.com> Fixes: c421a3eb2e27 ("blk-iocost: revamp debt handling") Cc: stable@vger.kernel.org # v5.10+ Link: https://lore.kernel.org/r/YmjODd4aif9BzFuO@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8c936f9ea11ec4e35e288810a7503b5c841a355f upstream.

When an iocg is in debt, its inuse weight is owned by debt handling and
should stay at 1. This invariant was broken when determining the amount of
surpluses at the beginning of donation calculation - when an iocg's
hierarchical weight is too low, the iocg is excluded from donation
calculation and its inuse is reset to its active regardless of its
indebtedness, triggering warnings like the following:

 WARNING: CPU: 5 PID: 0 at block/blk-iocost.c:1416 iocg_kick_waitq+0x392/0x3a0
 ...
 RIP: 0010:iocg_kick_waitq+0x392/0x3a0
 Code: 00 00 be ff ff ff ff 48 89 4d a8 e8 98 b2 70 00 48 8b 4d a8 85 c0 0f 85 4a fe ff ff 0f 0b e9 43 fe ff ff 0f 0b e9 4d fe ff ff <0f> 0b e9 50 fe ff ff e8 a2 ae 70 00 66 90 0f 1f 44 00 00 55 48 89
 RSP: 0018:ffffc90000200d08 EFLAGS: 00010016
 ...
  <IRQ>
  ioc_timer_fn+0x2e0/0x1470
  call_timer_fn+0xa1/0x2c0
 ...

As this happens only when an iocg's hierarchical weight is negligible, its
impact likely is limited to triggering the warnings. Fix it by skipping
resetting inuse of under-weighted debtors.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Rik van Riel <riel@surriel.com>
Fixes: c421a3eb2e27 ("blk-iocost: revamp debt handling")
Cc: stable@vger.kernel.org # v5.10+
Link: https://lore.kernel.org/r/YmjODd4aif9BzFuO@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
block/compat_ioctl: fix range check in BLKGETSIZE 2022-04-27T12:40:54+00:00 Khazhismel Kumykov khazhy@google.com 2022-04-14T22:40:56+00:00 3341481bf2bba2b3cb07de48e33c0ef778fb362c commit ccf16413e520164eb718cf8b22a30438da80ff23 upstream. kernel ulong and compat_ulong_t may not be same width. Use type directly to eliminate mismatches. This would result in truncation rather than EFBIG for 32bit mode for large disks. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Khazhismel Kumykov <khazhy@google.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220414224056.2875681-1-khazhy@google.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ccf16413e520164eb718cf8b22a30438da80ff23 upstream.

kernel ulong and compat_ulong_t may not be same width. Use type directly
to eliminate mismatches.

This would result in truncation rather than EFBIG for 32bit mode for
large disks.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220414224056.2875681-1-khazhy@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
block: fix offset/size check in bio_trim() 2022-04-20T07:36:18+00:00 Ming Lei ming.lei@redhat.com 2022-04-14T08:44:43+00:00 5c232a86fef605a0a7cda23cc8c2f6b46102241c [ Upstream commit 8535c0185d14ea41f0efd6a357961b05daf6687e ] Unit of bio->bi_iter.bi_size is bytes, but unit of offset/size is sector. Fix the above issue in checking offset/size in bio_trim(). Fixes: e83502ca5f1e ("block: fix argument type of bio_trim()") Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220414084443.1736850-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8535c0185d14ea41f0efd6a357961b05daf6687e ]

Unit of bio->bi_iter.bi_size is bytes, but unit of offset/size
is sector.

Fix the above issue in checking offset/size in bio_trim().

Fixes: e83502ca5f1e ("block: fix argument type of bio_trim()")
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220414084443.1736850-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
block: restore the old set_task_ioprio() behaviour wrt PF_EXITING 2022-04-08T11:58:57+00:00 Jiri Slaby jslaby@suse.cz 2022-03-28T08:59:28+00:00 9c2463490b9b5a9d86d9892e0b3eba74ebe548a0 commit 15583a563cd5a7358e975599b7de7caacd9e9ce9 upstream. PF_EXITING tasks were silently ignored before the below commits. Continue doing so. Otherwise python-psutil tests fail: ERROR: psutil.tests.test_process.TestProcess.test_zombie_process ---------------------------------------------------------------------- Traceback (most recent call last): File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/build/lib.linux-x86_64-3.9/psutil/_pslinux.py", line 1661, in wrapper return fun(self, *args, **kwargs) File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/build/lib.linux-x86_64-3.9/psutil/_pslinux.py", line 2133, in ionice_set return cext.proc_ioprio_set(self.pid, ioclass, value) ProcessLookupError: [Errno 3] No such process During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/psutil/tests/test_process.py", line 1313, in test_zombie_process succeed_or_zombie_p_exc(fun) File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/psutil/tests/test_process.py", line 1288, in succeed_or_zombie_p_exc return fun() File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/build/lib.linux-x86_64-3.9/psutil/__init__.py", line 792, in ionice return self._proc.ionice_set(ioclass, value) File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/build/lib.linux-x86_64-3.9/psutil/_pslinux.py", line 1665, in wrapper raise NoSuchProcess(self.pid, self._name) psutil.NoSuchProcess: process no longer exists (pid=2057) Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Fixes: 5fc11eebb4 (block: open code create_task_io_context in set_task_ioprio) Fixes: a957b61254 (block: fix error in handling dead task for ioprio setting) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220328085928.7899-1-jslaby@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 15583a563cd5a7358e975599b7de7caacd9e9ce9 upstream.

PF_EXITING tasks were silently ignored before the below commits.
Continue doing so. Otherwise python-psutil tests fail:
  ERROR: psutil.tests.test_process.TestProcess.test_zombie_process
  ----------------------------------------------------------------------
  Traceback (most recent call last):
    File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/build/lib.linux-x86_64-3.9/psutil/_pslinux.py", line 1661, in wrapper
      return fun(self, *args, **kwargs)
    File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/build/lib.linux-x86_64-3.9/psutil/_pslinux.py", line 2133, in ionice_set
      return cext.proc_ioprio_set(self.pid, ioclass, value)
  ProcessLookupError: [Errno 3] No such process

  During handling of the above exception, another exception occurred:

  Traceback (most recent call last):
    File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/psutil/tests/test_process.py", line 1313, in test_zombie_process
      succeed_or_zombie_p_exc(fun)
    File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/psutil/tests/test_process.py", line 1288, in succeed_or_zombie_p_exc
      return fun()
    File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/build/lib.linux-x86_64-3.9/psutil/__init__.py", line 792, in ionice
      return self._proc.ionice_set(ioclass, value)
    File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/build/lib.linux-x86_64-3.9/psutil/_pslinux.py", line 1665, in wrapper
      raise NoSuchProcess(self.pid, self._name)
  psutil.NoSuchProcess: process no longer exists (pid=2057)

Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Fixes: 5fc11eebb4 (block: open code create_task_io_context in set_task_ioprio)
Fixes: a957b61254 (block: fix error in handling dead task for ioprio setting)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220328085928.7899-1-jslaby@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
block: Fix the maximum minor value is blk_alloc_ext_minor() 2022-04-08T11:58:57+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2022-03-26T14:50:46+00:00 fbe2cc4525480ddd20c866bb5c0578071e01451a commit d1868328dec5ae2cf210111025fcbc71f78dd5ca upstream. ida_alloc_range(..., min, max, ...) returns values from min to max, inclusive. So, NR_EXT_DEVT is a valid idx returned by blk_alloc_ext_minor(). This is an issue because in device_add_disk(), this value is used in: ddev->devt = MKDEV(disk->major, disk->first_minor); and NR_EXT_DEVT is '(1 << MINORBITS)'. So, should 'disk->first_minor' be NR_EXT_DEVT, it would overflow. Fixes: 22ae8ce8b892 ("block: simplify bdev/disk lookup in blkdev_get") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/cc17199798312406b90834e433d2cefe8266823d.1648306232.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d1868328dec5ae2cf210111025fcbc71f78dd5ca upstream.

ida_alloc_range(..., min, max, ...) returns values from min to max,
inclusive.

So, NR_EXT_DEVT is a valid idx returned by blk_alloc_ext_minor().

This is an issue because in device_add_disk(), this value is used in:
   ddev->devt = MKDEV(disk->major, disk->first_minor);
and NR_EXT_DEVT is '(1 << MINORBITS)'.

So, should 'disk->first_minor' be NR_EXT_DEVT, it would overflow.

Fixes: 22ae8ce8b892 ("block: simplify bdev/disk lookup in blkdev_get")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/cc17199798312406b90834e433d2cefe8266823d.1648306232.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "Revert "block, bfq: honor already-setup queue merges"" 2022-04-08T11:58:38+00:00 Paolo Valente paolo.valente@linaro.org 2021-11-25T18:15:10+00:00 4083925bd6dc89216d156474a8076feec904e607 [ Upstream commit 15729ff8143f8135b03988a100a19e66d7cb7ecd ] A crash [1] happened to be triggered in conjunction with commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq: honor already-setup queue merges""). Yet, the reverted commit was not the one introducing the bug. In fact, it actually triggered a UAF introduced by a different commit, and now fixed by commit d29bd41428cf ("block, bfq: reset last_bfqq_created on group change"). So, there is no point in keeping commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges") out. This commit restores it. [1] https://bugzilla.kernel.org/show_bug.cgi?id=214503 Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20211125181510.15004-1-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 15729ff8143f8135b03988a100a19e66d7cb7ecd ]

A crash [1] happened to be triggered in conjunction with commit
2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The
latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq:
honor already-setup queue merges""). Yet, the reverted commit was not
the one introducing the bug. In fact, it actually triggered a UAF
introduced by a different commit, and now fixed by commit d29bd41428cf
("block, bfq: reset last_bfqq_created on group change").

So, there is no point in keeping commit 2d52c58b9c9b ("block, bfq:
honor already-setup queue merges") out. This commit restores it.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=214503

Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20211125181510.15004-1-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
bfq: fix use-after-free in bfq_dispatch_request 2022-04-08T11:58:38+00:00 Zhang Wensheng zhangwensheng5@huawei.com 2022-03-03T07:03:34+00:00 40b4ba0030e0b02cbacd424ebb9f4c8b0976c786 [ Upstream commit ab552fcb17cc9e4afe0e4ac4df95fc7b30e8490a ] KASAN reports a use-after-free report when doing normal scsi-mq test [69832.239032] ================================================================== [69832.241810] BUG: KASAN: use-after-free in bfq_dispatch_request+0x1045/0x44b0 [69832.243267] Read of size 8 at addr ffff88802622ba88 by task kworker/3:1H/155 [69832.244656] [69832.245007] CPU: 3 PID: 155 Comm: kworker/3:1H Not tainted 5.10.0-10295-g576c6382529e #8 [69832.246626] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [69832.249069] Workqueue: kblockd blk_mq_run_work_fn [69832.250022] Call Trace: [69832.250541] dump_stack+0x9b/0xce [69832.251232] ? bfq_dispatch_request+0x1045/0x44b0 [69832.252243] print_address_description.constprop.6+0x3e/0x60 [69832.253381] ? __cpuidle_text_end+0x5/0x5 [69832.254211] ? vprintk_func+0x6b/0x120 [69832.254994] ? bfq_dispatch_request+0x1045/0x44b0 [69832.255952] ? bfq_dispatch_request+0x1045/0x44b0 [69832.256914] kasan_report.cold.9+0x22/0x3a [69832.257753] ? bfq_dispatch_request+0x1045/0x44b0 [69832.258755] check_memory_region+0x1c1/0x1e0 [69832.260248] bfq_dispatch_request+0x1045/0x44b0 [69832.261181] ? bfq_bfqq_expire+0x2440/0x2440 [69832.262032] ? blk_mq_delay_run_hw_queues+0xf9/0x170 [69832.263022] __blk_mq_do_dispatch_sched+0x52f/0x830 [69832.264011] ? blk_mq_sched_request_inserted+0x100/0x100 [69832.265101] __blk_mq_sched_dispatch_requests+0x398/0x4f0 [69832.266206] ? blk_mq_do_dispatch_ctx+0x570/0x570 [69832.267147] ? __switch_to+0x5f4/0xee0 [69832.267898] blk_mq_sched_dispatch_requests+0xdf/0x140 [69832.268946] __blk_mq_run_hw_queue+0xc0/0x270 [69832.269840] blk_mq_run_work_fn+0x51/0x60 [69832.278170] process_one_work+0x6d4/0xfe0 [69832.278984] worker_thread+0x91/0xc80 [69832.279726] ? __kthread_parkme+0xb0/0x110 [69832.280554] ? process_one_work+0xfe0/0xfe0 [69832.281414] kthread+0x32d/0x3f0 [69832.282082] ? kthread_park+0x170/0x170 [69832.282849] ret_from_fork+0x1f/0x30 [69832.283573] [69832.283886] Allocated by task 7725: [69832.284599] kasan_save_stack+0x19/0x40 [69832.285385] __kasan_kmalloc.constprop.2+0xc1/0xd0 [69832.286350] kmem_cache_alloc_node+0x13f/0x460 [69832.287237] bfq_get_queue+0x3d4/0x1140 [69832.287993] bfq_get_bfqq_handle_split+0x103/0x510 [69832.289015] bfq_init_rq+0x337/0x2d50 [69832.289749] bfq_insert_requests+0x304/0x4e10 [69832.290634] blk_mq_sched_insert_requests+0x13e/0x390 [69832.291629] blk_mq_flush_plug_list+0x4b4/0x760 [69832.292538] blk_flush_plug_list+0x2c5/0x480 [69832.293392] io_schedule_prepare+0xb2/0xd0 [69832.294209] io_schedule_timeout+0x13/0x80 [69832.295014] wait_for_common_io.constprop.1+0x13c/0x270 [69832.296137] submit_bio_wait+0x103/0x1a0 [69832.296932] blkdev_issue_discard+0xe6/0x160 [69832.297794] blk_ioctl_discard+0x219/0x290 [69832.298614] blkdev_common_ioctl+0x50a/0x1750 [69832.304715] blkdev_ioctl+0x470/0x600 [69832.305474] block_ioctl+0xde/0x120 [69832.306232] vfs_ioctl+0x6c/0xc0 [69832.306877] __se_sys_ioctl+0x90/0xa0 [69832.307629] do_syscall_64+0x2d/0x40 [69832.308362] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [69832.309382] [69832.309701] Freed by task 155: [69832.310328] kasan_save_stack+0x19/0x40 [69832.311121] kasan_set_track+0x1c/0x30 [69832.311868] kasan_set_free_info+0x1b/0x30 [69832.312699] __kasan_slab_free+0x111/0x160 [69832.313524] kmem_cache_free+0x94/0x460 [69832.314367] bfq_put_queue+0x582/0x940 [69832.315112] __bfq_bfqd_reset_in_service+0x166/0x1d0 [69832.317275] bfq_bfqq_expire+0xb27/0x2440 [69832.318084] bfq_dispatch_request+0x697/0x44b0 [69832.318991] __blk_mq_do_dispatch_sched+0x52f/0x830 [69832.319984] __blk_mq_sched_dispatch_requests+0x398/0x4f0 [69832.321087] blk_mq_sched_dispatch_requests+0xdf/0x140 [69832.322225] __blk_mq_run_hw_queue+0xc0/0x270 [69832.323114] blk_mq_run_work_fn+0x51/0x60 [69832.323942] process_one_work+0x6d4/0xfe0 [69832.324772] worker_thread+0x91/0xc80 [69832.325518] kthread+0x32d/0x3f0 [69832.326205] ret_from_fork+0x1f/0x30 [69832.326932] [69832.338297] The buggy address belongs to the object at ffff88802622b968 [69832.338297] which belongs to the cache bfq_queue of size 512 [69832.340766] The buggy address is located 288 bytes inside of [69832.340766] 512-byte region [ffff88802622b968, ffff88802622bb68) [69832.343091] The buggy address belongs to the page: [69832.344097] page:ffffea0000988a00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88802622a528 pfn:0x26228 [69832.346214] head:ffffea0000988a00 order:2 compound_mapcount:0 compound_pincount:0 [69832.347719] flags: 0x1fffff80010200(slab|head) [69832.348625] raw: 001fffff80010200 ffffea0000dbac08 ffff888017a57650 ffff8880179fe840 [69832.354972] raw: ffff88802622a528 0000000000120008 00000001ffffffff 0000000000000000 [69832.356547] page dumped because: kasan: bad access detected [69832.357652] [69832.357970] Memory state around the buggy address: [69832.358926] ffff88802622b980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [69832.360358] ffff88802622ba00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [69832.361810] >ffff88802622ba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [69832.363273] ^ [69832.363975] ffff88802622bb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc [69832.375960] ffff88802622bb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [69832.377405] ================================================================== In bfq_dispatch_requestfunction, it may have function call: bfq_dispatch_request __bfq_dispatch_request bfq_select_queue bfq_bfqq_expire __bfq_bfqd_reset_in_service bfq_put_queue kmem_cache_free In this function call, in_serv_queue has beed expired and meet the conditions to free. In the function bfq_dispatch_request, the address of in_serv_queue pointing to has been released. For getting the value of idle_timer_disabled, it will get flags value from the address which in_serv_queue pointing to, then the problem of use-after-free happens; Fix the problem by check in_serv_queue == bfqd->in_service_queue, to get the value of idle_timer_disabled if in_serve_queue is equel to bfqd->in_service_queue. If the space of in_serv_queue pointing has been released, this judge will aviod use-after-free problem. And if in_serv_queue may be expired or finished, the idle_timer_disabled will be false which would not give effects to bfq_update_dispatch_stats. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Wensheng <zhangwensheng5@huawei.com> Link: https://lore.kernel.org/r/20220303070334.3020168-1-zhangwensheng5@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ab552fcb17cc9e4afe0e4ac4df95fc7b30e8490a ]

KASAN reports a use-after-free report when doing normal scsi-mq test

[69832.239032] ==================================================================
[69832.241810] BUG: KASAN: use-after-free in bfq_dispatch_request+0x1045/0x44b0
[69832.243267] Read of size 8 at addr ffff88802622ba88 by task kworker/3:1H/155
[69832.244656]
[69832.245007] CPU: 3 PID: 155 Comm: kworker/3:1H Not tainted 5.10.0-10295-g576c6382529e #8
[69832.246626] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[69832.249069] Workqueue: kblockd blk_mq_run_work_fn
[69832.250022] Call Trace:
[69832.250541]  dump_stack+0x9b/0xce
[69832.251232]  ? bfq_dispatch_request+0x1045/0x44b0
[69832.252243]  print_address_description.constprop.6+0x3e/0x60
[69832.253381]  ? __cpuidle_text_end+0x5/0x5
[69832.254211]  ? vprintk_func+0x6b/0x120
[69832.254994]  ? bfq_dispatch_request+0x1045/0x44b0
[69832.255952]  ? bfq_dispatch_request+0x1045/0x44b0
[69832.256914]  kasan_report.cold.9+0x22/0x3a
[69832.257753]  ? bfq_dispatch_request+0x1045/0x44b0
[69832.258755]  check_memory_region+0x1c1/0x1e0
[69832.260248]  bfq_dispatch_request+0x1045/0x44b0
[69832.261181]  ? bfq_bfqq_expire+0x2440/0x2440
[69832.262032]  ? blk_mq_delay_run_hw_queues+0xf9/0x170
[69832.263022]  __blk_mq_do_dispatch_sched+0x52f/0x830
[69832.264011]  ? blk_mq_sched_request_inserted+0x100/0x100
[69832.265101]  __blk_mq_sched_dispatch_requests+0x398/0x4f0
[69832.266206]  ? blk_mq_do_dispatch_ctx+0x570/0x570
[69832.267147]  ? __switch_to+0x5f4/0xee0
[69832.267898]  blk_mq_sched_dispatch_requests+0xdf/0x140
[69832.268946]  __blk_mq_run_hw_queue+0xc0/0x270
[69832.269840]  blk_mq_run_work_fn+0x51/0x60
[69832.278170]  process_one_work+0x6d4/0xfe0
[69832.278984]  worker_thread+0x91/0xc80
[69832.279726]  ? __kthread_parkme+0xb0/0x110
[69832.280554]  ? process_one_work+0xfe0/0xfe0
[69832.281414]  kthread+0x32d/0x3f0
[69832.282082]  ? kthread_park+0x170/0x170
[69832.282849]  ret_from_fork+0x1f/0x30
[69832.283573]
[69832.283886] Allocated by task 7725:
[69832.284599]  kasan_save_stack+0x19/0x40
[69832.285385]  __kasan_kmalloc.constprop.2+0xc1/0xd0
[69832.286350]  kmem_cache_alloc_node+0x13f/0x460
[69832.287237]  bfq_get_queue+0x3d4/0x1140
[69832.287993]  bfq_get_bfqq_handle_split+0x103/0x510
[69832.289015]  bfq_init_rq+0x337/0x2d50
[69832.289749]  bfq_insert_requests+0x304/0x4e10
[69832.290634]  blk_mq_sched_insert_requests+0x13e/0x390
[69832.291629]  blk_mq_flush_plug_list+0x4b4/0x760
[69832.292538]  blk_flush_plug_list+0x2c5/0x480
[69832.293392]  io_schedule_prepare+0xb2/0xd0
[69832.294209]  io_schedule_timeout+0x13/0x80
[69832.295014]  wait_for_common_io.constprop.1+0x13c/0x270
[69832.296137]  submit_bio_wait+0x103/0x1a0
[69832.296932]  blkdev_issue_discard+0xe6/0x160
[69832.297794]  blk_ioctl_discard+0x219/0x290
[69832.298614]  blkdev_common_ioctl+0x50a/0x1750
[69832.304715]  blkdev_ioctl+0x470/0x600
[69832.305474]  block_ioctl+0xde/0x120
[69832.306232]  vfs_ioctl+0x6c/0xc0
[69832.306877]  __se_sys_ioctl+0x90/0xa0
[69832.307629]  do_syscall_64+0x2d/0x40
[69832.308362]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[69832.309382]
[69832.309701] Freed by task 155:
[69832.310328]  kasan_save_stack+0x19/0x40
[69832.311121]  kasan_set_track+0x1c/0x30
[69832.311868]  kasan_set_free_info+0x1b/0x30
[69832.312699]  __kasan_slab_free+0x111/0x160
[69832.313524]  kmem_cache_free+0x94/0x460
[69832.314367]  bfq_put_queue+0x582/0x940
[69832.315112]  __bfq_bfqd_reset_in_service+0x166/0x1d0
[69832.317275]  bfq_bfqq_expire+0xb27/0x2440
[69832.318084]  bfq_dispatch_request+0x697/0x44b0
[69832.318991]  __blk_mq_do_dispatch_sched+0x52f/0x830
[69832.319984]  __blk_mq_sched_dispatch_requests+0x398/0x4f0
[69832.321087]  blk_mq_sched_dispatch_requests+0xdf/0x140
[69832.322225]  __blk_mq_run_hw_queue+0xc0/0x270
[69832.323114]  blk_mq_run_work_fn+0x51/0x60
[69832.323942]  process_one_work+0x6d4/0xfe0
[69832.324772]  worker_thread+0x91/0xc80
[69832.325518]  kthread+0x32d/0x3f0
[69832.326205]  ret_from_fork+0x1f/0x30
[69832.326932]
[69832.338297] The buggy address belongs to the object at ffff88802622b968
[69832.338297]  which belongs to the cache bfq_queue of size 512
[69832.340766] The buggy address is located 288 bytes inside of
[69832.340766]  512-byte region [ffff88802622b968, ffff88802622bb68)
[69832.343091] The buggy address belongs to the page:
[69832.344097] page:ffffea0000988a00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88802622a528 pfn:0x26228
[69832.346214] head:ffffea0000988a00 order:2 compound_mapcount:0 compound_pincount:0
[69832.347719] flags: 0x1fffff80010200(slab|head)
[69832.348625] raw: 001fffff80010200 ffffea0000dbac08 ffff888017a57650 ffff8880179fe840
[69832.354972] raw: ffff88802622a528 0000000000120008 00000001ffffffff 0000000000000000
[69832.356547] page dumped because: kasan: bad access detected
[69832.357652]
[69832.357970] Memory state around the buggy address:
[69832.358926]  ffff88802622b980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.360358]  ffff88802622ba00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.361810] >ffff88802622ba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.363273]                       ^
[69832.363975]  ffff88802622bb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
[69832.375960]  ffff88802622bb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[69832.377405] ==================================================================

In bfq_dispatch_requestfunction, it may have function call:

bfq_dispatch_request
	__bfq_dispatch_request
		bfq_select_queue
			bfq_bfqq_expire
				__bfq_bfqd_reset_in_service
					bfq_put_queue
						kmem_cache_free
In this function call, in_serv_queue has beed expired and meet the
conditions to free. In the function bfq_dispatch_request, the address
of in_serv_queue pointing to has been released. For getting the value
of idle_timer_disabled, it will get flags value from the address which
in_serv_queue pointing to, then the problem of use-after-free happens;

Fix the problem by check in_serv_queue == bfqd->in_service_queue, to
get the value of idle_timer_disabled if in_serve_queue is equel to
bfqd->in_service_queue. If the space of in_serv_queue pointing has
been released, this judge will aviod use-after-free problem.
And if in_serv_queue may be expired or finished, the idle_timer_disabled
will be false which would not give effects to bfq_update_dispatch_stats.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Wensheng <zhangwensheng5@huawei.com>
Link: https://lore.kernel.org/r/20220303070334.3020168-1-zhangwensheng5@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
block, bfq: don't move oom_bfqq 2022-04-08T11:58:36+00:00 Yu Kuai yukuai3@huawei.com 2022-01-29T01:59:24+00:00 c01fced8d38fbccc82787065229578006f28e020 [ Upstream commit 8410f70977734f21b8ed45c37e925d311dfda2e7 ] Our test report a UAF: [ 2073.019181] ================================================================== [ 2073.019188] BUG: KASAN: use-after-free in __bfq_put_async_bfqq+0xa0/0x168 [ 2073.019191] Write of size 8 at addr ffff8000ccf64128 by task rmmod/72584 [ 2073.019192] [ 2073.019196] CPU: 0 PID: 72584 Comm: rmmod Kdump: loaded Not tainted 4.19.90-yk #5 [ 2073.019198] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 2073.019200] Call trace: [ 2073.019203] dump_backtrace+0x0/0x310 [ 2073.019206] show_stack+0x28/0x38 [ 2073.019210] dump_stack+0xec/0x15c [ 2073.019216] print_address_description+0x68/0x2d0 [ 2073.019220] kasan_report+0x238/0x2f0 [ 2073.019224] __asan_store8+0x88/0xb0 [ 2073.019229] __bfq_put_async_bfqq+0xa0/0x168 [ 2073.019233] bfq_put_async_queues+0xbc/0x208 [ 2073.019236] bfq_pd_offline+0x178/0x238 [ 2073.019240] blkcg_deactivate_policy+0x1f0/0x420 [ 2073.019244] bfq_exit_queue+0x128/0x178 [ 2073.019249] blk_mq_exit_sched+0x12c/0x160 [ 2073.019252] elevator_exit+0xc8/0xd0 [ 2073.019256] blk_exit_queue+0x50/0x88 [ 2073.019259] blk_cleanup_queue+0x228/0x3d8 [ 2073.019267] null_del_dev+0xfc/0x1e0 [null_blk] [ 2073.019274] null_exit+0x90/0x114 [null_blk] [ 2073.019278] __arm64_sys_delete_module+0x358/0x5a0 [ 2073.019282] el0_svc_common+0xc8/0x320 [ 2073.019287] el0_svc_handler+0xf8/0x160 [ 2073.019290] el0_svc+0x10/0x218 [ 2073.019291] [ 2073.019294] Allocated by task 14163: [ 2073.019301] kasan_kmalloc+0xe0/0x190 [ 2073.019305] kmem_cache_alloc_node_trace+0x1cc/0x418 [ 2073.019308] bfq_pd_alloc+0x54/0x118 [ 2073.019313] blkcg_activate_policy+0x250/0x460 [ 2073.019317] bfq_create_group_hierarchy+0x38/0x110 [ 2073.019321] bfq_init_queue+0x6d0/0x948 [ 2073.019325] blk_mq_init_sched+0x1d8/0x390 [ 2073.019330] elevator_switch_mq+0x88/0x170 [ 2073.019334] elevator_switch+0x140/0x270 [ 2073.019338] elv_iosched_store+0x1a4/0x2a0 [ 2073.019342] queue_attr_store+0x90/0xe0 [ 2073.019348] sysfs_kf_write+0xa8/0xe8 [ 2073.019351] kernfs_fop_write+0x1f8/0x378 [ 2073.019359] __vfs_write+0xe0/0x360 [ 2073.019363] vfs_write+0xf0/0x270 [ 2073.019367] ksys_write+0xdc/0x1b8 [ 2073.019371] __arm64_sys_write+0x50/0x60 [ 2073.019375] el0_svc_common+0xc8/0x320 [ 2073.019380] el0_svc_handler+0xf8/0x160 [ 2073.019383] el0_svc+0x10/0x218 [ 2073.019385] [ 2073.019387] Freed by task 72584: [ 2073.019391] __kasan_slab_free+0x120/0x228 [ 2073.019394] kasan_slab_free+0x10/0x18 [ 2073.019397] kfree+0x94/0x368 [ 2073.019400] bfqg_put+0x64/0xb0 [ 2073.019404] bfqg_and_blkg_put+0x90/0xb0 [ 2073.019408] bfq_put_queue+0x220/0x228 [ 2073.019413] __bfq_put_async_bfqq+0x98/0x168 [ 2073.019416] bfq_put_async_queues+0xbc/0x208 [ 2073.019420] bfq_pd_offline+0x178/0x238 [ 2073.019424] blkcg_deactivate_policy+0x1f0/0x420 [ 2073.019429] bfq_exit_queue+0x128/0x178 [ 2073.019433] blk_mq_exit_sched+0x12c/0x160 [ 2073.019437] elevator_exit+0xc8/0xd0 [ 2073.019440] blk_exit_queue+0x50/0x88 [ 2073.019443] blk_cleanup_queue+0x228/0x3d8 [ 2073.019451] null_del_dev+0xfc/0x1e0 [null_blk] [ 2073.019459] null_exit+0x90/0x114 [null_blk] [ 2073.019462] __arm64_sys_delete_module+0x358/0x5a0 [ 2073.019467] el0_svc_common+0xc8/0x320 [ 2073.019471] el0_svc_handler+0xf8/0x160 [ 2073.019474] el0_svc+0x10/0x218 [ 2073.019475] [ 2073.019479] The buggy address belongs to the object at ffff8000ccf63f00 which belongs to the cache kmalloc-1024 of size 1024 [ 2073.019484] The buggy address is located 552 bytes inside of 1024-byte region [ffff8000ccf63f00, ffff8000ccf64300) [ 2073.019486] The buggy address belongs to the page: [ 2073.019492] page:ffff7e000333d800 count:1 mapcount:0 mapping:ffff8000c0003a00 index:0x0 compound_mapcount: 0 [ 2073.020123] flags: 0x7ffff0000008100(slab|head) [ 2073.020403] raw: 07ffff0000008100 ffff7e0003334c08 ffff7e00001f5a08 ffff8000c0003a00 [ 2073.020409] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000 [ 2073.020411] page dumped because: kasan: bad access detected [ 2073.020412] [ 2073.020414] Memory state around the buggy address: [ 2073.020420] ffff8000ccf64000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2073.020424] ffff8000ccf64080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2073.020428] >ffff8000ccf64100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2073.020430] ^ [ 2073.020434] ffff8000ccf64180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2073.020438] ffff8000ccf64200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2073.020439] ================================================================== The same problem exist in mainline as well. This is because oom_bfqq is moved to a non-root group, thus root_group is freed earlier. Thus fix the problem by don't move oom_bfqq. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20220129015924.3958918-4-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8410f70977734f21b8ed45c37e925d311dfda2e7 ]

Our test report a UAF:

[ 2073.019181] ==================================================================
[ 2073.019188] BUG: KASAN: use-after-free in __bfq_put_async_bfqq+0xa0/0x168
[ 2073.019191] Write of size 8 at addr ffff8000ccf64128 by task rmmod/72584
[ 2073.019192]
[ 2073.019196] CPU: 0 PID: 72584 Comm: rmmod Kdump: loaded Not tainted 4.19.90-yk #5
[ 2073.019198] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 2073.019200] Call trace:
[ 2073.019203]  dump_backtrace+0x0/0x310
[ 2073.019206]  show_stack+0x28/0x38
[ 2073.019210]  dump_stack+0xec/0x15c
[ 2073.019216]  print_address_description+0x68/0x2d0
[ 2073.019220]  kasan_report+0x238/0x2f0
[ 2073.019224]  __asan_store8+0x88/0xb0
[ 2073.019229]  __bfq_put_async_bfqq+0xa0/0x168
[ 2073.019233]  bfq_put_async_queues+0xbc/0x208
[ 2073.019236]  bfq_pd_offline+0x178/0x238
[ 2073.019240]  blkcg_deactivate_policy+0x1f0/0x420
[ 2073.019244]  bfq_exit_queue+0x128/0x178
[ 2073.019249]  blk_mq_exit_sched+0x12c/0x160
[ 2073.019252]  elevator_exit+0xc8/0xd0
[ 2073.019256]  blk_exit_queue+0x50/0x88
[ 2073.019259]  blk_cleanup_queue+0x228/0x3d8
[ 2073.019267]  null_del_dev+0xfc/0x1e0 [null_blk]
[ 2073.019274]  null_exit+0x90/0x114 [null_blk]
[ 2073.019278]  __arm64_sys_delete_module+0x358/0x5a0
[ 2073.019282]  el0_svc_common+0xc8/0x320
[ 2073.019287]  el0_svc_handler+0xf8/0x160
[ 2073.019290]  el0_svc+0x10/0x218
[ 2073.019291]
[ 2073.019294] Allocated by task 14163:
[ 2073.019301]  kasan_kmalloc+0xe0/0x190
[ 2073.019305]  kmem_cache_alloc_node_trace+0x1cc/0x418
[ 2073.019308]  bfq_pd_alloc+0x54/0x118
[ 2073.019313]  blkcg_activate_policy+0x250/0x460
[ 2073.019317]  bfq_create_group_hierarchy+0x38/0x110
[ 2073.019321]  bfq_init_queue+0x6d0/0x948
[ 2073.019325]  blk_mq_init_sched+0x1d8/0x390
[ 2073.019330]  elevator_switch_mq+0x88/0x170
[ 2073.019334]  elevator_switch+0x140/0x270
[ 2073.019338]  elv_iosched_store+0x1a4/0x2a0
[ 2073.019342]  queue_attr_store+0x90/0xe0
[ 2073.019348]  sysfs_kf_write+0xa8/0xe8
[ 2073.019351]  kernfs_fop_write+0x1f8/0x378
[ 2073.019359]  __vfs_write+0xe0/0x360
[ 2073.019363]  vfs_write+0xf0/0x270
[ 2073.019367]  ksys_write+0xdc/0x1b8
[ 2073.019371]  __arm64_sys_write+0x50/0x60
[ 2073.019375]  el0_svc_common+0xc8/0x320
[ 2073.019380]  el0_svc_handler+0xf8/0x160
[ 2073.019383]  el0_svc+0x10/0x218
[ 2073.019385]
[ 2073.019387] Freed by task 72584:
[ 2073.019391]  __kasan_slab_free+0x120/0x228
[ 2073.019394]  kasan_slab_free+0x10/0x18
[ 2073.019397]  kfree+0x94/0x368
[ 2073.019400]  bfqg_put+0x64/0xb0
[ 2073.019404]  bfqg_and_blkg_put+0x90/0xb0
[ 2073.019408]  bfq_put_queue+0x220/0x228
[ 2073.019413]  __bfq_put_async_bfqq+0x98/0x168
[ 2073.019416]  bfq_put_async_queues+0xbc/0x208
[ 2073.019420]  bfq_pd_offline+0x178/0x238
[ 2073.019424]  blkcg_deactivate_policy+0x1f0/0x420
[ 2073.019429]  bfq_exit_queue+0x128/0x178
[ 2073.019433]  blk_mq_exit_sched+0x12c/0x160
[ 2073.019437]  elevator_exit+0xc8/0xd0
[ 2073.019440]  blk_exit_queue+0x50/0x88
[ 2073.019443]  blk_cleanup_queue+0x228/0x3d8
[ 2073.019451]  null_del_dev+0xfc/0x1e0 [null_blk]
[ 2073.019459]  null_exit+0x90/0x114 [null_blk]
[ 2073.019462]  __arm64_sys_delete_module+0x358/0x5a0
[ 2073.019467]  el0_svc_common+0xc8/0x320
[ 2073.019471]  el0_svc_handler+0xf8/0x160
[ 2073.019474]  el0_svc+0x10/0x218
[ 2073.019475]
[ 2073.019479] The buggy address belongs to the object at ffff8000ccf63f00
 which belongs to the cache kmalloc-1024 of size 1024
[ 2073.019484] The buggy address is located 552 bytes inside of
 1024-byte region [ffff8000ccf63f00, ffff8000ccf64300)
[ 2073.019486] The buggy address belongs to the page:
[ 2073.019492] page:ffff7e000333d800 count:1 mapcount:0 mapping:ffff8000c0003a00 index:0x0 compound_mapcount: 0
[ 2073.020123] flags: 0x7ffff0000008100(slab|head)
[ 2073.020403] raw: 07ffff0000008100 ffff7e0003334c08 ffff7e00001f5a08 ffff8000c0003a00
[ 2073.020409] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000
[ 2073.020411] page dumped because: kasan: bad access detected
[ 2073.020412]
[ 2073.020414] Memory state around the buggy address:
[ 2073.020420]  ffff8000ccf64000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020424]  ffff8000ccf64080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020428] >ffff8000ccf64100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020430]                                   ^
[ 2073.020434]  ffff8000ccf64180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020438]  ffff8000ccf64200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020439] ==================================================================

The same problem exist in mainline as well.

This is because oom_bfqq is moved to a non-root group, thus root_group
is freed earlier.

Thus fix the problem by don't move oom_bfqq.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20220129015924.3958918-4-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>