linux.git/drivers/base/power, branch v5.12.5

PM: runtime: Fix unpaired parent child_count for force_resume

2021-05-19T08:56:09+00:00

commit c745253e2a691a40c66790defe85c104a887e14a upstream.

As pm_runtime_need_not_resume() relies also on usage_count, it can return
a different value in pm_runtime_force_suspend() compared to when called in
pm_runtime_force_resume(). Different return values can happen if anything
calls PM runtime functions in between, and causes the parent child_count
to increase on every resume.

So far I've seen the issue only for omapdrm that does complicated things
with PM runtime calls during system suspend for legacy reasons:

omap_atomic_commit_tail() for omapdrm.0
 dispc_runtime_get()
  wakes up 58000000.dss as it's the dispc parent
   dispc_runtime_resume()
    rpm_resume() increases parent child_count
 dispc_runtime_put() won't idle, PM runtime suspend blocked
pm_runtime_force_suspend() for 58000000.dss, !pm_runtime_need_not_resume()
 __update_runtime_status()
system suspended
pm_runtime_force_resume() for 58000000.dss, pm_runtime_need_not_resume()
 pm_runtime_enable() only called because of pm_runtime_need_not_resume()
omap_atomic_commit_tail() for omapdrm.0
 dispc_runtime_get()
  wakes up 58000000.dss as it's the dispc parent
   dispc_runtime_resume()
    rpm_resume() increases parent child_count
 dispc_runtime_put() won't idle, PM runtime suspend blocked
...
rpm_suspend for 58000000.dss but parent child_count is now unbalanced

Let's fix the issue by adding a flag for needs_force_resume and use it in
pm_runtime_force_resume() instead of pm_runtime_need_not_resume().

Additionally omapdrm system suspend could be simplified later on to avoid
lots of unnecessary PM runtime calls and the complexity it adds. The
driver can just use internal functions that are shared between the PM
runtime and system suspend related functions.

Fixes: 4918e1f87c5f ("PM / runtime: Rework pm_runtime_force_suspend/resume()")
Signed-off-by: Tony Lindgren 
Reviewed-by: Ulf Hansson 
Tested-by: Tomi Valkeinen 
Cc: 4.16+  # 4.16+
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

PM: runtime: Fix race getting/putting suppliers at probe

2021-03-29T17:27:09+00:00

pm_runtime_put_suppliers() must not decrement rpm_active unless the
consumer is suspended. That is because, otherwise, it could suspend
suppliers for an active consumer.

That can happen as follows:

 static int driver_probe_device(struct device_driver *drv, struct device *dev)
 {
	int ret = 0;

	if (!device_is_registered(dev))
		return -ENODEV;

	dev->can_match = true;
	pr_debug("bus: '%s': %s: matched device %s with driver %s\n",
		 drv->bus->name, __func__, dev_name(dev), drv->name);

	pm_runtime_get_suppliers(dev);
	if (dev->parent)
		pm_runtime_get_sync(dev->parent);

 At this point, dev can runtime suspend so rpm_put_suppliers() can run,
 rpm_active becomes 1 (the lowest value).

	pm_runtime_barrier(dev);
	if (initcall_debug)
		ret = really_probe_debug(dev, drv);
	else
		ret = really_probe(dev, drv);

 Probe callback can have runtime resumed dev, and then runtime put
 so dev is awaiting autosuspend, but rpm_active is 2.

	pm_request_idle(dev);

	if (dev->parent)
		pm_runtime_put(dev->parent);

	pm_runtime_put_suppliers(dev);

 Now pm_runtime_put_suppliers() will put the supplier
 i.e. rpm_active 2 -> 1, but consumer can still be active.

	return ret;
 }

Fix by checking the runtime status. For any status other than
RPM_SUSPENDED, rpm_active can be considered to be "owned" by
rpm_[get/put]_suppliers() and pm_runtime_put_suppliers() need do nothing.

Reported-by: Asutosh Das 
Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance")
Signed-off-by: Adrian Hunter 
Cc: 5.1+  # 5.1+
Signed-off-by: Rafael J. Wysocki

PM: runtime: Fix ordering in pm_runtime_get_suppliers()

2021-03-29T17:27:09+00:00

rpm_active indicates how many times the supplier usage_count has been
incremented. Consequently it must be updated after pm_runtime_get_sync() of
the supplier, not before.

Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance")
Signed-off-by: Adrian Hunter 
Cc: 5.1+  # 5.1+
Signed-off-by: Rafael J. Wysocki

PM: runtime: Defer suspending suppliers

2021-03-22T14:21:38+00:00

Because the PM-runtime status of the device is not updated in
__rpm_callback(), attempts to suspend the suppliers of the given
device triggered by the rpm_put_suppliers() call in there may
cause a supplier to be suspended completely before the status of
the consumer is updated to RPM_SUSPENDED, which is confusing.

To avoid that (1) modify __rpm_callback() to only decrease the
PM-runtime usage counter of each supplier and (2) make rpm_suspend()
try to suspend the suppliers after changing the consumer's status to
RPM_SUSPENDED, in analogy with the device's parent.

Link: https://lore.kernel.org/linux-pm/CAPDyKFqm06KDw_p8WXsM4dijDbho4bb6T4k50UqqvR1_COsp8g@mail.gmail.com/
Fixes: 21d5c57b3726 ("PM / runtime: Use device links")
Reported-by: elaine.zhang 
Diagnosed-by: Ulf Hansson 
Reviewed-by: Ulf Hansson 
Signed-off-by: Rafael J. Wysocki

Revert "PM: runtime: Update device status before letting suppliers suspend"

2021-03-19T15:35:47+00:00

Revert commit 44cc89f76464 ("PM: runtime: Update device status
before letting suppliers suspend") that introduced a race condition
into __rpm_callback() which allowed a concurrent rpm_resume() to
run and resume the device prematurely after its status had been
changed to RPM_SUSPENDED by __rpm_callback().

Fixes: 44cc89f76464 ("PM: runtime: Update device status before letting suppliers suspend")
Link: https://lore.kernel.org/linux-pm/24dfb6fc-5d54-6ee2-9195-26428b7ecf8a@intel.com/
Reported-by: Adrian Hunter 
Cc: 4.10+  # 4.10+
Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Ulf Hansson

PM: runtime: Update device status before letting suppliers suspend

2021-03-01T16:40:38+00:00

Because the PM-runtime status of the device is not updated in
__rpm_callback(), attempts to suspend the suppliers of the given
device triggered by rpm_put_suppliers() called by it may fail.

Fix this by making __rpm_callback() update the device's status to
RPM_SUSPENDED before calling rpm_put_suppliers() if the current
status of the device is RPM_SUSPENDING and the callback just invoked
by it has returned 0 (success).

While at it, modify the code in __rpm_callback() to always check
the device's PM-runtime status under its PM lock.

Link: https://lore.kernel.org/linux-pm/CAPDyKFqm06KDw_p8WXsM4dijDbho4bb6T4k50UqqvR1_COsp8g@mail.gmail.com/
Fixes: 21d5c57b3726 ("PM / runtime: Use device links")
Reported-by: Elaine Zhang 
Diagnosed-by: Ulf Hansson 
Signed-off-by: Rafael J. Wysocki 
Tested-by: Elaine Zhang 
Reviewed-by: Ulf Hansson 
Cc: 4.10+  # 4.10+
Signed-off-by: Rafael J. Wysocki

Merge tag 'driver-core-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2021-02-24T18:13:55+00:00

Pull driver core / debugfs update from Greg KH:
 "Here is the "big" driver core and debugfs update for 5.12-rc1

  This set of driver core patches caused a bunch of problems in
  linux-next for the past few weeks, when Saravana tried to set
  fw_devlink=on as the default functionality. This caused a number of
  systems to stop booting, and lots of bugs were fixed in this area for
  almost all of the reported systems, but this option is not ready to be
  turned on just yet for the default operation based on this testing, so
  I've reverted that change at the very end so we don't have to worry
  about regressions in 5.12

  We will try to turn this on for 5.13 if testing goes better over the
  next few months.

  Other than the fixes caused by the fw_devlink testing in here, there's
  not much more:

   - debugfs fixes for invalid input into debugfs_lookup()

   - kerneldoc cleanups

   - warn message if platform drivers return an error on their remove
     callback (a futile effort, but good to catch).

  All of these have been in linux-next for a while now, and the
  regressions have gone away with the revert of the fw_devlink change"

* tag 'driver-core-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
  Revert "driver core: Set fw_devlink=on by default"
  of: property: fw_devlink: Ignore interrupts property for some configs
  debugfs: do not attempt to create a new file before the filesystem is initalized
  debugfs: be more robust at handling improper input in debugfs_lookup()
  driver core: auxiliary bus: Fix calling stage for auxiliary bus init
  of: irq: Fix the return value for of_irq_parse_one() stub
  of: irq: make a stub for of_irq_parse_one()
  clk: Mark fwnodes when their clock provider is added/removed
  PM: domains: Mark fwnodes when their powerdomain is added/removed
  irqdomain: Mark fwnodes when their irqdomain is added/removed
  driver core: fw_devlink: Handle suppliers that don't use driver core
  of: property: Add fw_devlink support for optional properties
  driver core: Add fw_devlink.strict kernel param
  of: property: Don't add links to absent suppliers
  driver core: fw_devlink: Detect supplier devices that will never be added
  driver core: platform: Emit a warning if a remove callback returned non-zero
  of: property: Fix fw_devlink handling of interrupts/interrupts-extended
  gpiolib: Don't probe gpio_device if it's not the primary device
  device.h: Remove bogus "the" in kerneldoc
  gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default
  ...

Merge branches 'pm-sleep', 'pm-core', 'pm-domains' and 'pm-clk'

2021-02-15T16:01:11+00:00

* pm-sleep:
  PM: sleep: Constify static struct attribute_group
  PM: sleep: Use dev_printk() when possible
  PM: sleep: No need to check PF_WQ_WORKER in thaw_kernel_threads()

* pm-core:
  PM: runtime: Fix typos and grammar
  PM: runtime: Fix resposible -> responsible in runtime.c

* pm-domains:
  PM: domains: Simplify the calculation of variables
  PM: domains: Add "performance" column to debug summary
  PM: domains: Make of_genpd_add_subdomain() return -EPROBE_DEFER
  PM: domains: Make set_performance_state() callback optional
  PM: domains: use device's next wakeup to determine domain idle state
  PM: domains: inform PM domain of a device's next wakeup

* pm-clk:
  PM: clk: make PM clock layer compatible with clocks that must sleep

PM: domains: Mark fwnodes when their powerdomain is added/removed

2021-02-09T13:31:07+00:00

This allows fw_devlink to recognize power domain drivers that don't use
the device-driver model to initialize the device. fw_devlink will use
this information to make sure consumers of such power domain aren't
indefinitely blocked from probing, waiting for the power domain device
to appear and bind to a driver.

Tested-by: Marek Szyprowski 
Signed-off-by: Saravana Kannan 
Link: https://lore.kernel.org/r/20210205222644.2357303-8-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman

PM: domains: Simplify the calculation of variables

2021-02-01T14:04:21+00:00

Fix the following coccicheck warnings:

./drivers/base/power/domain.c:938:31-33: WARNING !A || A && B is
equivalent to !A || B.

Reported-by: Abaci Robot 
Suggested-by: Jiapeng Zhong 
Signed-off-by: Abaci Team 
Acked-by: Ulf Hansson 
Signed-off-by: Rafael J. Wysocki