linux.git/drivers/base, branch v4.14.49

regmap: Correct comparison in regmap_cached

2018-05-30T05:52:41+00:00

[ Upstream commit 71df179363a5a733a8932e9afb869760d7559383 ]

The cache pointer points to the actual memory used by the cache, as the
comparison here is looking for the type of the cache it should check
against cache_type.

Fixes: 1ea975cf1ef5 ("regmap: Add a function to check if a regmap register is cached")
Signed-off-by: Charles Keepax 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

x86/bugs: Expose /sys/../spec_store_bypass

2018-05-22T16:54:02+00:00

commit c456442cd3a59eeb1d60293c26cbe2ff2c4e42cf upstream

Add the sysfs file for the new vulerability. It does not do much except
show the words 'Vulnerable' for recent x86 cores.

Intel cores prior to family 6 are known not to be vulnerable, and so are
some Atoms and some Xeon Phi.

It assumes that older Cyrix, Centaur, etc. cores are immune.

Signed-off-by: Konrad Rzeszutek Wilk 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Borislav Petkov 
Reviewed-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

PM / wakeirq: Fix unbalanced IRQ enable for wakeirq

2018-04-26T09:02:20+00:00

[ Upstream commit 69728051f5bf15efaf6edfbcfe1b5a49a2437918 ]

If a device is runtime PM suspended when we enter suspend and has
a dedicated wake IRQ, we can get the following warning:

WARNING: CPU: 0 PID: 108 at kernel/irq/manage.c:526 enable_irq+0x40/0x94
[  102.087860] Unbalanced enable for IRQ 147
...
(enable_irq) from [] (dev_pm_arm_wake_irq+0x4c/0x60)
(dev_pm_arm_wake_irq) from []
 (device_wakeup_arm_wake_irqs+0x58/0x9c)
(device_wakeup_arm_wake_irqs) from []
(dpm_suspend_noirq+0x10/0x48)
(dpm_suspend_noirq) from []
(suspend_devices_and_enter+0x30c/0xf14)
(suspend_devices_and_enter) from []
(enter_state+0xad4/0xbd8)
(enter_state) from [] (pm_suspend+0x38/0x98)
(pm_suspend) from [] (state_store+0x68/0xc8)

This is because the dedicated wake IRQ for the device may have been
already enabled earlier by dev_pm_enable_wake_irq_check().  Fix the
issue by checking for runtime PM suspended status.

This issue can be easily reproduced by setting serial console log level
to zero, letting the serial console idle, and suspend the system from
an ssh terminal.  On resume, dmesg will have the warning above.

The reason why I have not run into this issue earlier has been that I
typically run my PM test cases from on a serial console instead over ssh.

Fixes: c84345597558 (PM / wakeirq: Enable dedicated wakeirq for suspend)
Signed-off-by: Tony Lindgren 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

PM / domains: Fix up domain-idle-states OF parsing

2018-04-26T09:02:18+00:00

[ Upstream commit a3381e3a65cbaf612c8f584906c4dba27e84267c ]

Commit b539cc82d493 (PM / Domains: Ignore domain-idle-states that are
not compatible), made it possible to ignore non-compatible
domain-idle-states OF nodes. However, in case that happens while doing
the OF parsing, the number of elements in the allocated array would
exceed the numbers actually needed, thus wasting memory.

Fix this by pre-iterating the genpd OF node and counting the number of
compatible domain-idle-states nodes, before doing the allocation. While
doing this, it makes sense to rework the code a bit to avoid open coding,
of parts responsible for the OF node iteration.

Let's also take the opportunity to clarify the function header for
of_genpd_parse_idle_states(), about what is being returned in case of
errors.

Fixes: b539cc82d493 (PM / Domains: Ignore domain-idle-states that are not compatible)
Signed-off-by: Ulf Hansson 
Reviewed-by: Lina Iyer 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

regmap: Fix reversed bounds check in regmap_raw_write()

2018-04-24T07:36:25+00:00

commit f00e71091ab92eba52122332586c6ecaa9cd1a56 upstream.

We're supposed to be checking that "val_len" is not too large but
instead we check if it is smaller than the max.

The only function affected would be regmap_i2c_smbus_i2c_write() in
drivers/base/regmap/regmap-i2c.c.  Strangely that function has its own
limit check which returns an error if (count >= I2C_SMBUS_BLOCK_MAX) so
it doesn't look like it has ever been able to do anything except return
an error.

Fixes: c335931ed9d2 ("regmap: Add raw_write/read checks for max_raw_write/read sizes")
Signed-off-by: Dan Carpenter 
Signed-off-by: Mark Brown 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

Revert "base: arch_topology: fix section mismatch build warnings"

2018-04-08T12:26:32+00:00

commit 9de9a449482677a75f1edd2049268a7efc40fc96 upstream.

This reverts commit 452562abb5b7 ("base: arch_topology: fix section
mismatch build warnings"). It causes the notifier call hangs in some
use-cases.

In some cases with using maxcpus, some of cpus are booted first and
then the remaining cpus are booted. As an example, some users who want
to realize fast boot up often use the following procedure.

  1) Define all CPUs on device tree (CA57x4 + CA53x4)
  2) Add "maxcpus=4" in bootargs
  3) Kernel boot up with CA57x4
  4) After kernel boot up, CA53x4 is booted from user

When kernel init was finished, CPUFREQ_POLICY_NOTIFIER was not still
unregisterd. This means that "__init init_cpu_capacity_callback()"
will be called after kernel init sequence. To avoid this problem,
it needs to remove __init{,data} annotations by reverting this commit.

Also, this commit was needed to fix kernel compile issue below.
However, this issue was also fixed by another patch: commit 82d8ba717ccb
("arch_topology: Fix section miss match warning due to
free_raw_capacity()") in v4.15 as well.
Whereas commit 452562abb5b7 added all the missing __init annotations,
commit 82d8ba717ccb removed it from free_raw_capacity().

WARNING: vmlinux.o(.text+0x548f24): Section mismatch in reference
from the function init_cpu_capacity_callback() to the variable
.init.text:$x
The function init_cpu_capacity_callback() references
the variable __init $x.
This is often because init_cpu_capacity_callback lacks a __init
annotation or the annotation of $x is wrong.

Fixes: 82d8ba717ccb ("arch_topology: Fix section miss match warning due to free_raw_capacity()")
Cc: stable 
Signed-off-by: Gaku Inami 
Reviewed-by: Dietmar Eggemann 
Tested-by: Dietmar Eggemann 
Acked-by: Sudeep Holla 
Signed-off-by: Greg Kroah-Hartman

dma-buf/fence: Fix lock inversion within dma-fence-array

2018-03-19T07:42:47+00:00

[ Upstream commit 03e4e0a9e02cf703da331ff6cfd57d0be9bf5692 ]

Ages ago Rob Clark noted,

"Currently with fence-array, we have a potential deadlock situation.  If
we fence_add_callback() on an array-fence, the array-fence's lock is
acquired first, and in it's ->enable_signaling() callback, it will install
cbs on it's array-member fences, so the array-member's lock is acquired
second.

But in the signal path, the array-member's lock is acquired first, and
the array-fence's lock acquired second."

Rob proposed either extensive changes to dma-fence to unnest the
fence-array signaling, or to defer the signaling onto a workqueue. This
is a more refined version of the later, that should keep the latency
of the fence signaling to a minimum by using an irq-work, which is
executed asap.

Reported-by: Rob Clark 
Suggested-by: Rob Clark 
References: 1476635975-21981-1-git-send-email-robdclark@gmail.com
Signed-off-by: Chris Wilson 
Cc: Rob Clark 
Cc: Gustavo Padovan 
Cc: Sumit Semwal 
Cc: Christian König 
Reviewed-by: Christian König 
Signed-off-by: Sumit Semwal 
Link: https://patchwork.freedesktop.org/patch/msgid/20171114162719.30958-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

PM / runtime: Fix handling of suppliers with disabled runtime PM

2018-02-25T10:07:58+00:00

[ Upstream commit 31eb7431805493e10f4731f366cf4d4e3e952035 ]

Prevent rpm_get_suppliers() from returning an error code if runtime
PM is disabled for one or more of the supplier devices it wants to
runtime-resume, so as to make runtime PM work for devices with links
to suppliers that don't use runtime PM (such links may be created
during device enumeration even before it is known whether or not
runtime PM will be enabled for the devices in question, for example).

Fixes: 21d5c57b3726 (PM / runtime: Use device links)
Reported-by: Adrian Hunter 
Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Lukas Wunner 
Tested-by: Adrian Hunter 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

PM / runtime: Update links_count also if !CONFIG_SRCU

2018-02-22T14:42:20+00:00

commit 433986c2c265d106d6a8e88006e0131fefc92b7b upstream.

Commit baa8809f6097 (PM / runtime: Optimize the use of device links)
added an invocation of pm_runtime_drop_link() to __device_link_del().
However there are two variants of that function, one for CONFIG_SRCU and
another for !CONFIG_SRCU, and the commit only modified the former.

Fixes: baa8809f6097 (PM / runtime: Optimize the use of device links)
Cc: v4.10+  # v4.10+
Signed-off-by: Lukas Wunner 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

sysfs/cpu: Add vulnerability folder

2018-01-17T08:45:27+00:00

commit 87590ce6e373d1a5401f6539f0c59ef92dd924a9 upstream.

As the meltdown/spectre problem affects several CPU architectures, it makes
sense to have common way to express whether a system is affected by a
particular vulnerability or not. If affected the way to express the
mitigation should be common as well.

Create /sys/devices/system/cpu/vulnerabilities folder and files for
meltdown, spectre_v1 and spectre_v2.

Allow architectures to override the show function.

Signed-off-by: Thomas Gleixner 
Reviewed-by: Greg Kroah-Hartman 
Reviewed-by: Konrad Rzeszutek Wilk 
Cc: Peter Zijlstra 
Cc: Will Deacon 
Cc: Dave Hansen 
Cc: Linus Torvalds 
Cc: Borislav Petkov 
Cc: David Woodhouse 
Link: https://lkml.kernel.org/r/20180107214913.096657732@linutronix.de
Signed-off-by: Greg Kroah-Hartman